Car Subwoofer Amplifiers

Car Subwoofer Amplifiers

Boss Audio R1100M Mosfet Monoblock Power Amplifier with Remote Subwoofer Level Control

Boss Audio R1100M Mosfet Monoblock Power Amplifier with Remote Subwoofer Level Control

  • MOSFET Monoblock Power Amplifier
  • Remote Subwoofer Level Control Included
  • Blue Illuminated BOSS Logo
  • Max Power @ 2 Ohms: 1100 Watts
  • RMS Power @ 4 Ohms: 250 Watts



BOSS AUDIO MGR350B Marine Gauge MECH-LESS Receiver, with Audio Streaming
by Boss Audio Systems, Inc. BOSS AUDIO MGR350B Marine Gauge MECH-LESS  Receiver, with Audio Streaming(8) Buy new: CDN$ 110.96 CDN$ 106.35 13 used & new from CDN$ 106.35
Pyle PLMRCW2, White Water Resistant Radio Shield
by Sound Around Pyle PLMRCW2, White Water Resistant Radio Shield(7) Buy new: CDN$ 28.56 11 used & new from CDN$ 19.46
by

No products found.

by

SAZ-2500D – Sundown Audio 2500W 1-Channel Monoblock Amplifier

SAZ-2500D – Sundown Audio 2500W 1-Channel Monoblock Amplifier

  • 2500W Digital Class-D Linkable Mono Block Amplifier
  • Daisy-Chain Through Output RCA
  • 1 Ohm Stability
  • Efficiency : 86% @ 4 ohm, at 100Hz
  • 24dB/Oct Variable Crossover

The SAZ-2500D replaces the SAZ-2000D in our line-up. It packs 25% more power into a casing only 3/4″ longer than the older SAZ-2000D model. The 2500D features an output section equal to our highly regarded SAZ-3000D model and an extremely robust power supply section to back it up!

All of the latest technology and R&D available to us was implemented in the 2500D — years of experience in the SPL lanes and in customer vehicles has all been taken into account. We feel that the 2500D is a very worthy addition to our line up for both hardcore SPL competitors and enthusiasts alike.

* Digital Class-D Linkable Mono Block Amplifier
* Double Sided Through Hole Epoxy PCB
* 1 Ohm Stability
* Daisy-Chain Through Output RCA
* Efficiency : 86% @ 4 ohm, at 100Hz
* 24dB/Oct Variable Crossover
* Multi-Way Protection Circuitry
* (Thermal/Over Current/Speaker Short/Speaker DC Protection)
* RCA Line Input and Master Output
* 24dB Octave Crossover Slope
* 24dB Octave Variable Subsonic Crossover Slope
* Variable Bass Boost
* Variable Low Pass Filter
* Variable Phase Shift
* Zero(0) Gauge Power Supply Connectors
* Tested Voltage & THD : 14.4V & Less than 1% THD
* Operating Voltage : DC 10V~18V
* Wired Remote Controller

Rated power output

RMS power, 2 ohm linkable/dual mono
5000W x 1CH

RMS power, 1 ohm mono
2500W x 1CH
RMS power, 2 ohm mono 1200W x 1CH

RMS power, 4 ohm mono
600W x 1CH
Signal to Noise Ratio >90dB
Low pass frequency crossover 35Hz~300Hz
Subsonic filter 10Hz~60Hz
Bass boost @ 45Hz 0~6dB
Phase shift control 0~180 degree
Frequency response 10Hz~350Hz (+/- 1dB)
T.H.D @ 4 ohm <0.1% Efficiency @ 4 ohm 86% Fuse rating 250A (external type fuse) Input Sensitivity 200mV to 6V (+/- 5%) Dimensions 252(W) x 58(H) x 512(L)mm



SAX-125.2 – Sundown Audio 125W 2-Channel Amplifier

  • 2/1 Channel Bridgeable Class-AB Amplifier
  • MOSFET PWM Power Supply
  • Stable Into 4 Ohms Bridged or 2 Ohms Stereo Load
  • 12dB Octave Electronic Crossover Slope
  • High Pass Filter Variable with x 10 Range Selectable Switch

The SAX-125.2 was designed to replace our SAX-100.2 model — it features an upgraded power supply for a bit more power as well as greatly enhanced crossover flexibility.

This unit was built to satisfy the discerning audiophile who doesn’t necessarily want to spend huge sums of money on his full range amplifier. This amplifier utilizes high quality Sanken bipolar output transistors, and 12 of them at that! The SAX-125.2 is also equally suited for subwoofer applications where tremendous power is not called for.

* 2/1 Channel Bridgeable Class-AB Amplifier
* MOSFET PWM Power Supply
* Stable Into 4 Ohms Bridged or 2 Ohms Stereo Load
* 12dB Octave Electronic Crossover Slope
* Variable Subsonic Filter
* High Pass Filter Variable with x 10 Range Selectable Switch
* Low Pass Filter Variable with x 10 Range Selectable Switch
* HPF/FULL/LPF Selectable Switch
* Variable Bass Boost Control
* Variable Bass-Boost Frequency Control
* Variable Input Level Control
* Input Sensitivity : 200mV ~ 6V
* Subsonic Filter : 10Hz ~ 500Hz
* Signal Input and Line Out RCA Connectors
* Multi-Way Protection circuitry (Thermal/Over Current/Speaker Short/Speaker DC protection)
* Tested Voltage & THD: 14.4V & Less than 0.05% THD
* Operating Voltage : DC10V~16V Power Input
* Wired Remote Controller

RMS power, 4 ohm stereo
125W x 2CH

RMS power, 2 ohm stereo
200W x 2CH

RMS power, 4 ohm bridged
400W x 1CH
Signal to Noise Ratio >90dB
Low pass frequency crossover 50Hz ~ 5KHz
High Pass Crossover 30Hz ~ 3KHz
Variable Subsonic Filter 10Hz to 500Hz
Bass Boost 0~18dB
Variable Bass-Boost Frequency Control 35Hz to 120Hz
Frequency Response 10Hz ~ 40KHz (+/-1dB)
THD@RMS Watts <0.1% Channel Separation 75dB Fuse Rating 20A x 3 Input Sensitivity Variable 200mV~6V (+/- 5%) Dimensions 252(W) x 58(H) x 340(L)mm



No products found.

by

No products found.

by

SAZ-1000D – Sundown Audio 1000W 1-Channel Monoblock Amplifier

SAZ-1000D – Sundown Audio 1000W 1-Channel Monoblock Amplifier

  • 1000W Digital Class-D Linkable Mono Block Amplifier
  • Double Sided Through Hole Epoxy PCB
  • 1 Ohm Stability
  • Efficiency : 86% @ 4 ohm, at 100Hz
  • Multi-Way Protection Circuitry (Thermal/Over Current/Speaker Short/Speaker DC Protection)

The SAZ-1000D is our most compact Class-D amplifier and can fit almost anywhere! Don’t let the small size fool you as this amplifier packs 1000-watts RMS into a tiny package only 11.5 inches long.

* Digital Class-D Linkable Mono Block Amplifier
* Double Sided Through Hole Epoxy PCB
* 1 Ohm Stability
* Efficiency : 86% @ 4 ohm, at 100Hz
* 24dB/Oct Variable Crossover
* Multi-Way Protection Circuitry (Thermal/Over Current/Speaker Short/Speaker DC Protection)
* RCA Line Input and Master Output
* 24dB Octave Crossover Slope
* Variable Subsonic Filter
* Variable Bass Boost
* Variable Low Pass Filter
* Variable Phase Shift
* Four(4) Gauge Power Supply Connectors
* Tested Voltage & THD : 14.4V & Less than 1% THD
* Operating Voltage : DC 10V~16V
* Wired Remote Controller

RMS power, 2 ohm linkable/dual mono
1800W x 1CH

RMS power, 1 ohm mono
1000W x 1CH

RMS power, 2 ohm mono
600W x 1CH

RMS power, 4 ohm mono
300W x 1CH
Signal to Noise Ratio >90dB
Low pass frequency crossover 35Hz~300Hz
Subsonic filter 10Hz~60Hz
Bass boost @ 45Hz 0~18dB
Phase shift control 0~180 degree
Frequency response 10Hz~350Hz (+/- 1dB)
T.H.D @ 4 ohm <0.1% Efficiency @ 4 ohm 86% Fuse rating 25A x 3 Input Sensitivity 200mV to 6V (+/- 5%) Dimensions 252(W) x 58(H) x 294(L)mm



No products found.

by

No products found.

by

Powerbass ASA1500.1DX 1500-Watt Class D Amplifier Reviews

Powerbass ASA1500.1DX 1500-Watt Class D Amplifier

  • Power Output – 1500 watts x 1 1-ohm continuous – 750 watts x 1 2-ohm continuous – 325 x 1 4-ohm continuous
  • Maximum Output – 3000 watts 1-ohm
  • 40Hz-250Hz electronic crossover – phase switch – remote gain controller
  • Fully adjustable Bass EQ – 18dB Centered at 40Hz
  • Subsonic Filter: Variable 15Hz-50Hz
  • Power Output – 1500 watts x 1 1-ohm continuous – 750 watts x 1 2-ohm continuous – 325 x 1 4-ohm continuous
  • Maximum Output – 3000 watts 1-ohm
  • 40Hz-250Hz electronic crossover – phase switch – remote gain controller
  • Fully adjustable Bass EQ – 18dB Centered at 40Hz

The PowerBass ASA Series of amplifiers offers a complete line up of 2 and 4 channel models plus our newest Class D Bass amplifiers.  Whether you just need more power or you are looking to build an entire system the ASA Series has a model that is perfect for almost any application. The PowerBass Class D Bass amplifiers are super efficient and can provide all the power and more for gut wrenching, jaw rattling bass in your ride! These amplifiers include a host of features usually only found in more expensive models-variable sub sonic filter, 0-180 degree phase shift switch, variable Bass EQ and more! Each PowerBass Class D Bass amplifier comes complete with a wired remote Gain Controller that allows the driver to adjust the woofers output from the cockpit of the vehicle. The low profile (under 2″) extruded heat sink lends itself to a wide variety of mounting locations in the vehicle-including under most front seats. Although the elegant brushed satin black finish and rounded corners will have you wanting to show off this sophisticated piece of electronics to all your friends! IMPORTANT-these Class D Bass amplifiers can draw in excess of 150 amperes at full power. Make sure the charging system in the vehicle is capable of supplying the necessary current to properly operate this equipment. Use only 1/0 gauge wire when connecting to the vehicle battery.



Find More Polk Audio Car Amplifier Products

No products found.

by

No products found.

by

Scosche E1000 1000 Watt Single Amplifier Kit

Scosche E1000 1000 Watt Single Amplifier Kit

  • 17 ft 9.5mm HEX clear Blue power cable
  • 3 ft 9.5mm HEX clear Silver ground cable
  • 17ft Twisted Pair HEX audio cable
  • Speaker Wire and Single ANL Fuse holder
  • Includes all installation hardware

Scosche E1000 1000 Watt Single Amp Kit



No products found.

by

No products found.

by

800-Watt Class D Mono Amplifier – PIONEER

800-Watt Class D Mono Amplifier – PIONEER

800-Watt Class D Mono AmplifierPIONEER

  • Maximizes efficiency while minimizing heat generation
  • Extra-compact design for versatile installation
  • Selectable Bass Boost controls audio balance & impact
  • Peak music power: 800W
  • Load imp capability: 2 ohms – 8 ohms
  • Freq resp: 10 Hz – 240 Hz
  • Signal-to-noise ratio: 80 dB
  • 400W x 1 @ 2 ohms

Pioneer Gm-D7500M 800-Watt Class D Mono Amplifier
Mobile Audio and Video Accessories – Amplifiers



Pioneer TS-W2502D2 10 In. Champion Series PRO Subwoofer with 3000 Watts

  • 10-inch Champion Series PRO subwoofer with 3000 Watts maximum (800 nominal) power handling
  • Basalt/carbon fiber reinforced IMPP cone with fiber-woven aramid surround
  • Dual 2-ohm voice coil for 1 or 4 ohm operation
  • 20 Hz to 150 Hz frequency response with 90 dB sensitivity
  • 169.2 Millimeter mounting depth

PIONEER TS-W2502D2 10-Inch Champion Series PRO Subwoofer with Dual 2Ω Voice Coils~Pioneer’s TS-W2502D2 subwoofers are designed to produce powerful bass. Just take a look at the super-heavy-duty construction, designed to handle up to 3,000 watts max. Double-stacked magnets deliver higher power, and a step-up radial surround offers superior control and long excursions. Pioneer used a constructed cast-aluminum basket for this sub–add in a patented IMPP cone and you’ve got a monster sub that can handle whatever you want to throw at it.

Pioneer Champion Series PRO Subwoofers

Powerful by Design
Champion Series PRO subwoofers deliver incredible musicality heightened by booming bass–all in a versatile, compact design. Inspired by Pioneer’s strong SPL heritage, Champion PRO subwoofers deliver a remarkably powerful, accurate, and clear low-end that will transform your in-car audio experience.

Air Suspension System
Boasting big bass power, the patented air suspension technology of the Champion Series PRO subwoofer makes it a hard-hitting performer. The innovative architecture of the chamber creates a spring-like effect that compresses air, enabling the speaker to fit a 10-inch enclosure while delivering 12-inch bass sound.

Stealthy Installation
Masterfully engineered to deliver maximum sound in a minimal enclosure space, the Champion Series PRO subwoofer is designed to fit a variety of spaces. From under the front seats and behind the back seats, to inside doors and under the dash, your install can be customized to fit your needs.

Built to Last
The Champion Series PRO subwoofer combines innovative technology with top quality materials to consistently deliver superior performance. This subwoofer houses a three-layer, wide-roll, fiber-woven radial surround that provides phenomenal power handling with minimal distortion. The enduring strength of this subwoofer comes from its aluminum die-cast chassis, double stacked magnets, patented air suspension system, and rigid lightweight IMPP cone.



TS-W2502D2 Features

Air Suspension System
For its revolutionary 3.25 inch deep Shallow Subwoofer, Pioneer created an Air Suspension system effective within a 70% smaller-than-previous enclosure that locks air for a spring-like effect between main and drive cones moving in unison. The result is consistently clear, powerful, wide-ranging bass response. The subwoofer’s dual cone structure maintains better sound linearity and reliability after hours of hard use than conventional subwoofers with “spider” structures to keep the voice coil aligned. This incredible technology is applied to this new generation of high output, high performance subwoofers.

Double-Stack Magnet with Double-Stack Top Plate
To produce the tremendous magnetic energy we envisioned for this sub, we employed double-stacked magnets, weighing a hefty 110oz, and a double-stacked top plate above them. This design ensures positive, powerful control of the voice coil during those long excursions–and it’s one reason you can ring up those high SPL numbers.

Wide-Roll 3-Layer Fiber Radial Surround
A sub’s surround plays a key role in a speaker’s performance. In order for bass response to be clear and tight, the surround has to respond evenly around its entire circumference without flexing or puckering, even at high volume levels. That’s why Pioneer created a surround consisting of two layers of urethane with a layer of interwoven fiber between them. It’s strong, stable, and it reduces distortion. In addition, the wider-than-normal design provides a long, linear excursion for excellent control and heavy-duty durability.

Interlaced Basalt/Carbon Fiber Reinforced IMPP Cone
To ensure that you get more natural bass, Pioneer incorporated their new Basalt fiber technology into their shallow subwoofers. The volcanic-rock fibers create a cone that is lightweight, rigid, well damped, stable in temperature extremes, and more . In short, this bass really rocks.

Cast Aluminum Basket
Designed from scratch by Pioneer, this one-piece aluminum basket assembly holds the motor assembly, cone, and magnet structure securely in place. The benefits of this design: reduced internal stress, superior damping, and increased magnetic efficiency.

Dual Voice Coil
The TS-W2502D2/D4 provides two voice coils, each either at dual 2 or dual 4 ohms. So you can use a low-impedance amp to produce much bigger, much more powerful bass. More options, more power: that’s what DVC is all about. The Bridging Adapter is included for an easy Single Voice Coil hookup. It becomes a Single 4 Ohm or Single 8 Ohm with Bridging Adapter for ultimate flexibility for use with modern mono amplifiers

Add Newly Designed Spoke Grilles
We also recommend covering up your subwoofer with the UD-G308 . This stylish spoke grille is a must add-on when building a system and gives the look of pure professionalism.

Click images above to enlarge.


TS-W2502D2 Specs

Size: 10-Inch
Woofer Cone Material: Interlaced Basalt/Carbon Fiber Reinforced IMPP Cone
Surround: Wide-Roll, 3-Layer Fiber Woven Aramid Radial with Honeycomb Cloth
Voice Coil: Dual 4-Layer, Long Voice Coil
Voice Coil Wire: Copper
Voice Coil Bobbin: Phenol Resin Coated Glass Cloth
Magnet Construction: Double Stacked (88oz)
Basket Design: Aluminum Die-Cast Rigid Chassis
Gasket: 1-Piece ABS
Wire Terminals: Integrated Single-Sided Silver Compression Terminals
Watts MAX. Music Power: 3000 Watts
Watts Nominal Power Handling: 800 Watts
Frequency Response: 20 Hz to 150 Hz
Sensitivity: 89 dB
Ohm Rating: 1 or 4 ohm
Recommended Enclosure: 0.35 ~~ 0.7 Cubic Feet
Dimensions: 283.1 mm x 192.6 mm
Mounting Depth: 169.2 mm
Accessory Grill: UD-G258

Pioneer Car Audio Systems

Pioneer’s Mobile Business Group is known for offering the kind of in-car products that make driving more enjoyable by offering high quality audio and video, seamless connectivity and ease-of-use. Its focus is on the development of new digital technologies including audio video, navigation and satellite radio, while maintaining its strong heritage in products for car audio enthusiasts and sound competitors.


What’s in the Box

Pioneer TS-W2502D2 Subwoofer, Mounting Screws/Washers, Installation Guide~



Related Pioneer Car Amplifier Products

No products found.

by

No products found.

by

Audiobahn AW1571T 1000 Watt 15 Inch DVC Car Audio Subwoofer Dual 4 Ohm Sub Reviews

Audiobahn AW1571T 1000 Watt 15 Inch DVC Car Audio Subwoofer Dual 4 Ohm Sub

  • 1000 Watt 15 Inch DVC Car Subwoofer Dual 4 Ohm Sub
  • 1000 Watts Peak Handling/500 Watts RMS Power Handling
  • 2″ 4-Layer Edge Wound AVS Voice Coil Design
  • Non-Pressed 2-Layer Poly-Coated Paper Cone Woofer
  • Multi-Connect Lug Lock Terminals

This is an Audiobahn AW1571T high-performance 15″ inch car audio subwoofer. Featuring a dual black anodized aluminum and layer edged wound dual 4-ohm voice coil, this 15″ inch subwoofer can handle an amazing 1000 watts of total power (500 watts RMS). Also featured, are large lug lock terminals. These terminals enable you to wire this powerful sub with large gauge cables into a 2 or 8 ohm load. The extended pole piece, vented oversized back plate, flat spider design and 1 ½” treated foam surround, allows this powerful subwoofer to produce more excursion without bottoming out and cooler temperatures; which equals, deeper bass and higher SPL levels. Not only does this sub sound great, but it looks great as well. This sub comes equipped with 3-dimensional, computer-molded chrome flames, a chrome plated heavy stamped steel basket and a large 60 oz. magnet. Other features include: a KM3 non-pressed / non-transfer paper cone and a convex dust cap.



No products found.

by

No products found.

by

Legacy LA1110BK 1100 Watt Mono-Block Class-D Amplifier (Black)

Legacy LA1110BK 1100 Watt Mono-Block Class-D Amplifier (Black)

Legacy LA1110BK 1100 Watt Mono-Block Class-D Amplifier (Black)



No products found.

by

No products found.

by

Sound Storm Laboratories F4.400 400-Watt 4-Channel Power Amplifier with High/Low Crossover

Sound Storm Laboratories F4.400 400-Watt 4-Channel Power Amplifier with High/Low Crossover

  • Low pass crossover on CH3/4: 120Hz (fixed, 120Hz)
  • Variable input gain control
  • Power and protection LED indicators
  • Line and speaker level inputs
  • Chrome plated RCA connectors and screw terminals
  • Max power 2 ohm 100W X 4
  • RMS power 4 ohm 50W X 4

400W 4Channel Mosfet



Related Jensen Car Stereo Products

No products found.

by

No products found.

by

SSL EV5000D EVOLUTION 5000W Class D Monoblock Amplifier with Remote Subwoofer Level Control Reviews

SSL EV5000D EVOLUTION 5000W Class D Monoblock Amplifier with Remote Subwoofer Level Control

  • One Ohm Stable Mono-Block
  • Strapping capability: Strap two amps together for twice the power (2 Ohm stable)
  • Variable low pass filter: 50 -150Hz
  • Variable subsonic filter: 15 – 40Hz
  • Variable 0 to +18dB Bass Boost

Charles Darwin generated a lot of controversy with his theory of evolution. Although his theories were well respected in the scientific community, they met with opposition from some in the general public. Sound Storm Laboratories’ EVOLUTION is a series of stylish, efficient, high performing amplifiers that are as exciting and well respected as Darwin’s theory, but without all of the controversy. SSL EVOLUTION is loved by scientists and non-scientists alike. The high power output of the one ohm stable EVOLUTION class D monoblock amplifiers make EVOLUTION a natural selection for those wanting a BIG bass sound. The EV5000D, the 5,000 watt version of EVOLUTION class D monoblock, provides flexibility by allowing you to strap two amps together for TWICE the power (2 ohm stable). This amplifier features a low pass filter variable from 50Hz to 150Hz, a subsonic filter variable from 15Hz to 40Hz, and Bass Boost variable from zero to +18dB. It also boasts an input sensitivity selector, variable input gain control, power and protection (thermal, overload, and short circuit) LED indicators, and allows you to shift the phase 180 degrees. Other standard features on this model include RCA line level inputs, RCA line outputs for system building, chrome plated RCA connectors and screw terminals, and a remote subwoofer level control knob. Frequency response is 20Hz to 250Hz (+/-3dB). For technical questions about this product please visit our website, www.soundstormlab.com, or call a technician at 888.38.STORM. Let us prove to you that when it comes to building an impressive and affordable home-quality theater in your vehicle, Sound Storm is your mobile entertainment solution…and everything else is just noise.



No products found.

by

No products found.

by

Car Audio Tags: