Alpine Car Amplifiers

Alpine Car Amplifiers

Alpine SWR1243D / SWR-1243D / SWR-1243D Type-R 12 DVC Car Subwoofer

Alpine SWR1243D / SWR-1243D / SWR-1243D Type-R 12 DVC Car Subwoofer

  • Maximum Power Output: 1800W
  • RMS Power Handling: 600W
  • Frequency Response: 23-500 Hz
  • Impedance: Dual 4-ohm voice coils

Alpine SWR1243D / SWR-1243D / SWR-1243D Type-R 12 DVC Car Subwoofer



Pyle PLMRCW2, White Water Resistant Radio Shield
by Sound Around Pyle PLMRCW2, White Water Resistant Radio Shield(7) Buy new: CDN$ 28.56 11 used & new from CDN$ 19.46
BOSS AUDIO MGR350B Marine Gauge MECH-LESS Receiver, with Audio Streaming
by Boss Audio Systems, Inc. BOSS AUDIO MGR350B Marine Gauge MECH-LESS  Receiver, with Audio Streaming(8) Buy new: CDN$ 110.96 CDN$ 106.35 13 used & new from CDN$ 106.35
by

No products found.

by

Brand New Alpine MRX-M240 X Series D Class Mono 2400 Watt RMS Digital Car Audio Amplifier Reviews

Brand New Alpine MRX-M240 X Series D Class Mono 2400 Watt RMS Digital Car Audio Amplifier

  • Alpine MRX-M240 Mono Power Amplifier
  • Class-D, Best Dollar-Per-Watt Performance
  • Max RMS Power Output: 2400 Watts
  • RMS Power Output @ 4 Ohms: 1500 Watts
  • RMS Power Output @ 2 Ohms: 2400 Watts

Brand New Alpine MRX-M240 X Series D Class Mono 2400 Watt RMS Digital Car Audio Amplifier
Features:

Alpine MRX-M240 Mono Power Amplifier
Class-D, Best Dollar-Per-Watt Performance
Max RMS Power Output: 2400 Watts
RMS Power Output @ 4 Ohms: 1500 Watts
RMS Power Output @ 2 Ohms: 2400 Watts
RMS Power Output @ 1 Ohm: 1000 Watts
PDX Technology Inside
Sleek Aggressive Design w/ End Caps
Voltage ON/OFF Sensing, Non-Fading Speaker-Level Inputs for OEM Upgrade
Built-in Crossover, Bass EQ, and Subsonic Filter
Remote Bass (RUX-KNOB) Compatible
Extremely Low Noise and Distortion
Extremely High Damping Factor
Reliable No-Shutdown Design
Install Terminal Layout: Two-Sided
Screw Mount / Wire Cover: Integrated Wire and Mounting Screw Terminals
General Amplifier Type: Class-D (Digital)
Channel Design: 1 Channel (Mono)
Power Supply Design: DC-DC PWM Power Supply
Power Supply: MOSFET
Final Outputs: Direct FET
Crossover: Variable Low Pass Filter
Gain Control: Continuously Adjustable Gain Control
Subsonic Filter: Variable Subsonic Filter
Bass EQ: Bass EQ Function
Bass Control: Remote Bass Control (RUX-KNOB) Ready
Low-impedance Possibility: Low-impedance Possibility
Current Protection: Over-Current, Over-Voltage and Thermal Protection
Board Circuitry: S.T.A.R. Circuit
Board Design: 6-layer Glass Epoxy PC Board
RCA Output: Non-Fading Pre-Amp Output
Speaker-Level Inputs: 4-channel Speaker Level Inputs
Power Indicator: Top Mounted Blue LED Power Indicator
Thermal Control: Multi-stage Power Limiting
Sound Tuning Crossover Frequency : 50-400Hz, -24dB/oct.
Crossover Frequency (LPF): 50 – 400 Hz, -24dB/oct.
Subsonic Filter: 5 – 30 Hz, -24dB/oct.
EQ (Equalizer): 0 to +12dB, fc=50Hz
General Power Requirements: 14.4 V.D
Input Sensitivity: 0.1 – 4.0 V
Input Sensitivity (Speaker Level Input): 0.5 – 10 V
Input Impedance: >10k ohms



No products found.

by

No products found.

by

Alpine PDX-5 – Amplifier – 4-channel plus Mono-power

Alpine PDX-5 – Amplifier – 4-channel plus Mono-power

  • Peak Power Capacity: 150 W X 4 +(300W X 1)
  • RMS Power Capacity: 75 W X 4 +(300W X 1)
  • MOSFET Power And Output Stages
  • Class-D Amplifier Design
  • 5-channel car amplifier
  • 75 watts RMS x 4 + 300 watts RMS x 1 at 4 or 2 ohms
  • 150 watts RMS x 2 + 300 watts RMS x 1 in bridged mode (4-ohm stable in bridged mode)
  • CEA-2006 compliant
  • Stackable installation design with front-panel controls
  • Variable high- and low-pass filters (30-400 Hz, 12 dB/octave)
  • Quick-connect speaker connectors
  • Class-D amplifier design
  • MOSFET power and output stages
  • Fuse rating: 30A x 2
  • 4-gauge power and ground leads recommended wiring and hardware not included with amplifier
  • Dimensions: (WHD) 10-3/16 x 2-1/2 x 8-3/8 In.
  • warranty: 1 year



    No products found.

    by

    No products found.

    by
  • Alpine V-Power MRP-F250 – Amplifier – 4-channel

    Alpine V-Power MRP-F250 – Amplifier – 4-channel

    • RMS Power (at 14.4V THD+N, 20Hz-20kHz
    • Per channel into 4 ohms: 40W x 4 (0.08% THD)
    • Per channel into 2 ohms: 50W x 4
    • Brigded 4 ohms: 180W x 2

    Power up your system with Alpine’s V-Power amplifiers. These amps have a new aggressive design, but they not only look good they provide outstanding power, flexibility and value.



    More Alpine Car Amplifier Products

    No products found.

    by

    No products found.

    by

    Alpine PDX-5M 5-Ch Digital Marine Amplifier

    Alpine PDX-5M 5-Ch Digital Marine Amplifier

    • Overload and thermal protection circuitry
    • Coated to protect unit against harsh marine environment

    4 ohms: 75 watts x 4 chan. + 300 watts x 1 chan, 2 ohms: 75 watts x 4 chan. + 300 watts x 1 chan, Bridged, 4 ohms: 150 watts x 2 chan. + 300 watts x 1 chan, Salt/Fog/UV protection



    More Alpine Car Amplifier Products

    No products found.

    by

    No products found.

    by

    Brand New Alpine MRX-M100 Mono 1900 Watt Peak / 1000 Watt RMS “Class D” Digital Car Audio Amplifier with MOSFET Power Supply and Nickel-Plated Screw Terminals

    Brand New Alpine MRX-M100 Mono 1900 Watt Peak / 1000 Watt RMS “Class D” Digital Car Audio Amplifier with MOSFET Power Supply and Nickel-Plated Screw Terminals

    • Alpine MRX-M100 Mono Class D Car Audio Amplifier
    • Peak Power: 1900 Watts
    • RMS Power: 1000 Watts
    • RMS Power @ 4 Ohm: 600 Watts x 1 Channel
    • RMS Power @ 2 Ohm: 1000 Watts x 1 Channel

    Brand New Alpine MRX-M100 Mono 1900 Watt Peak / 1000 Watt RMS “Class D” Digital Car Audio Amplifier with MOSFET Power Supply and Nickel-Plated Screw Terminals
    Features

    Alpine MRX-M100 Mono Class D Car Audio Amplifier
    Peak Power: 1900 Watts
    RMS Power: 1000 Watts
    RMS Power @ 4 Ohm: 600 Watts x 1 Channel
    RMS Power @ 2 Ohm: 1000 Watts x 1 Channel
    Amplifier Type: Class-D (Digital)
    Channel Design: 1 Channel (Mono)
    Thermal Management Control
    DC-DC PWM Power Supply
    MOSFET Power Supply
    S.T.A.R. Circuitry
    Over-Current, Over-Voltage and Thermal Protection
    Top Mounted Blue LED Power Indicator
    RCA Preout Connectors
    Speaker Level Inputs
    Crossover: Adjustable Low-Pass Filter
    Direct FET Output
    Board Design: 6th Layer PC Board
    Continuously Adjustable Gain Control
    Remote Bass Control
    Variable Bass EQ
    Subsonic Filter: Variable Subsonic Filter
    Dimensions
    Foot Print (WxHxD) mm: 340mm x 58mm x 230mm
    Foot Print (WxHxD) in: 13-3/8″ x 2-1/4″ x 9″
    Heat Sink (WxHxD) mm: 280mm x 58mm x 230mm
    Heat Sink (WxHxD) in: 11″ x 2-1/4″ x 9″
    Weight: 3.8kg
    Power Requirements: 14.4V DC (11V to 16V)
    Preamp Output: 4V (Max.)
    Remote Level: 0 to -20dB (RUX-KNOB required)



    More Alpine Car Amplifier Products

    No products found.

    by

    No products found.

    by

    Alpine V-Power MRP-M450 – Amplifier – 1-channel

    Alpine V-Power MRP-M450 – Amplifier – 1-channel

    • MOSFET Power Supply
    • Per channel into 2 ohms: 400W x 1
    • Continuously Adjustable Gain Control
    • MOSFET Power Supply and Discrete Pre-Amp Stage
    • Gold Plated RCA Input Connectors

    Power up your system with Alpine’s all new V-Power amplifiers. These amps have a new aggressive design, but they not only look good they provide outstanding power, flexibility and value.



    No products found.

    by

    No products found.

    by

    Alpine MRPM1000 / MRP-M1000 / MRP-M1000 Mono Power Amplifier

    Alpine MRPM1000 / MRP-M1000 / MRP-M1000 Mono Power Amplifier

    • RMS Power Per Channel Into 4 Ohms: 600W X 1
    • RMS Power Per Channel Into 2 Ohms: 1000W X 1
    • Works Best With 2 Single Voice Coil Subs Or 1 Dual Voice
    • MOSFET Power Power Supply Design

    Power up your system with Alpines V-Power amplifiers! This best selling family of amplifiers offers more choices for building the right system for you, and provides flexibility and value in an aggressive design. Alpine continues to bring you mind-blowing sound performance only the best – so you get the sound you deserve.

  • RMS Power (at 14.4V, 20-200Hz)
  • Per channel into 4 ohms: 600W x 1 (1% THD)
  • Per channel into 2 ohms: 1000W x 1
  • Best Dollar-Per-Watt performance
  • The Perfect Upgrade Choice
  • Sleek Aggressive Design
  • Amplifier Type: Class-D (Digital)
  • Channel Design: 1 Channel (Mono)
  • Thermal Control: Thermal Management Control
  • Power Supply: DC-DC PWM Power Supply
  • Power Supply Design: MOSFET Power
  • Board Circuitry: STAR Circuitry
  • Current Protection: Over-Current, Over-Voltage and Thermal Protection
  • Power Indicator: Top Mounted Blue LED Power Indicator
  • RCA Output: Gold Plated RCA Input Connectors



    No products found.

    by

    No products found.

    by
  • Alpine PDX-F4 4/3/2 Power Density Digital Amplifier

    Alpine PDX-F4 4/3/2 Power Density Digital Amplifier

    • Alpine PDX-F4 4/3/2 Power Density Digital Amplifier

    Alpine PDX-F4 4/3/2 Power Density Digital Amplifier



    Related Alpine Car Amplifier Products

    No products found.

    by

    No products found.

    by

    Alpine SPR-60C 6.5″ Car Audio Component System (Pair) Reviews

    Alpine SPR-60C 6.5″ Car Audio Component System (Pair)

    • 6.5-inch Car audio 2 way component speakers (pair)
    • Peak: 660 watts per set / 330 watts each side | RMS: 220 watts per set / 110 watts each side
    • Frequency Response: 65Hz – 29kHz
    • Sensitivity: 87 dB
    • Mounting depth: 2-3/8-inch

    6.5-inch Car audio 2 way component speakers (pair)



    Find More Alpine Car Amplifier Products

    No products found.

    by

    No products found.

    by

    Car Audio Tags: