Pioneer Car Amplifiers

Pioneer Car Amplifiers

Pioneer TSSW251 Shallow Mount 10 Inch 800 Watts Subwoofer

Pioneer TSSW251 Shallow Mount 10 Inch 800 Watts Subwoofer

  • Subwoofer Size: 10 Inches
  • Designed to fit into small spaces under seat, behind seat or Rear Side
  • 800 Watts
  • Flat Woofer

Less than 3.5-inches deep and requires an extremely small enclosure making it the ideal subwoofer for consumers who want the added benefits of bass in their cars but are not fond of the inconvenience associated with large subwoofer enclosures.

The subwoofer is packed with additional new features including C-type shaped reinforced nodes, M-shaped three-layer fiber woven radial surround, interlaced ultra-long glass fiber reinforced IMMP cone, large magnet circuitry and 2-piece T-pole yoke all of which help produce great audio quality for this extremely shallow speaker. Because of the air suspension technology, the subwoofer requires much less than the standard 1.0 cubic foot of enclosure volume to perform at its optimal level.
BR>The rear of the subwoofer features a stamped metal fin-shape directional basket directing air movement sideways, to eliminate the loading effect when the rear of the subwoofer is installed too close to the wall of a speaker enclosure. Additional features of the subwoofer include increased input power capabilities and spring loaded input terminals.This 10-inch shallow subwoofer handles 800 watts max., 200 watts nominal power, and delivers deep bass with top-notch sound quality thanks to features like Pioneer’s extremely strong and lightweight interlaced composite IMPP Cone.

Pioneer’s Shallow Series Subs

Lean and Mean
The Pioneer Shallow Series subwoofer derives its big bass sound from its innovative design. Although only 3-1/4 inches thick, the Shallow Series uses state-of-the-art, patented air suspension technology to create a tight spring of pressure that delivers a wide-ranging bass response. The result is a radically thin subwoofer that fits a variety of enclosures and gives your system accurate, powerful, and satisfying bass.

“ib-FLAT”
Known as the “flat” subwoofer, the ib-FLAT name is derived from the speaker’s two most outstanding characteristics. The “i” stands for intelligent design and describes the cutting-edge air-suspension technology that gives the speaker its remarkable size and strength. “b FLAT” refers to its ability to accurately and easily play 29.135 Hertz, the sound of the lowest black key on the piano and one of the most difficult to reproduce. Musical and robust, the ib-FLAT boasts an amazing range, enabling you to hear each performance on a grand scale.

Install Anywhere
The sleek design and compact size of Pioneer Shallow Series subs enables you to perform great custom installations. The Shallow Series plays perfectly in both tight and hidden spaces, providing you with the same booming bass performance of a regular subwoofer. Whether hidden or seen, the big bass sound of these versatile speakers will definitely get you noticed.



TS-SW251 Features

Air Suspension System
In order to create a subwoofer that is three and a quarter inches deep, Pioneer had to develop revolutionary subwoofer technology. A traditional subwoofer uses the spider design to keep the voice coil of the speaker aligned while it moves. This type of set-up can become soft over time degrading the subwoofer’s performance. Pioneer created a patent-pending air suspension system that locks air between a main cone and a drive cone. The cones move together in unison, with the locked-in air behaving like a spring. The dual-cone structure is a spider-less design that maintains better sound linearity, and reliability even after many of hours of hard use.

The pressure from the trapped air results in a consistent bass response across a wide frequency range. The result is a tight, precise movement with powerful and clean bass output.

3-Layer Interwoven Radial Surround
The shallow subwoofer incorporates an innovative woven cloth reinforced radial urethane surround for improved power handling, reduced distortion, improved durability, and louder, more controlled bass. The surround is constructed of three layers–two of urethane and one of interwoven cloth. The interwoven cloth distributes strength throughout the surround material and improving its high power capability. The result is an extremely durable and resilient surround that resists puckering, even under intense power conditions.

Unlike traditional surrounds that use a single arch shape design, the Pioneer Shallow Subwoofer utilizes a patent-pending M-shape surround that provides superior sound linearity.

M-Shaped Surround
The M-shape surround also has a lower height, and a lower fc or tuning frequency. The lower fc threshold translates to better and longer performance at lower frequencies.

Angled Push Terminals
Traditional subwoofer terminals are mounted horizontally or vertically. These mounts force wires to be bent to fit which can be difficult if low-gauge high performance wires are used. The Pioneer shallow subwoofer’s patent-pending, angled push terminals make it easy to connect speaker wires. The straighter connection saves space and makes installation easier.

Fin-Shaped Basket
Traditional subwoofers push air downward. This creates a “loading effect’ or area of pressure underneath the speaker which hampers performance and responsiveness. The rear of the powerful and slim Pioneer shallow subwoofer is designed with specially-shaped fins that channel the airflow sideways instead of downward. Air is continuously pushed in a circular motion, eliminating the “loading effect” or unwanted pressure of air behind the cone.

This 10-inch shallow subwoofer handles 800 watts.
Click to enlarge.


TS-SW251 Specs

Size: 10-Inch
Woofer Cone Material: Composite IMPP using Interlaced Carbon Fiber and Glass Fiber
Surround: Dual 3-Layer Fiber-Woven Radial Surround
Voice Coil: Copper Round
Voice Coil Wire: 4-Layer
Voice Coil Bobbin: FQG
Magnet Construction: Strontium
Gasket: 1-Piece, ABS
Watts MAX. Music Power: 800 Watts
Watts Nominal Power Handling: 200 Watts
Frequency Response: 20 ~ 144Hz
Sensitivity: 89dB
Ohm Rating: 4 ohm
Dimensions: 10-9/10 in x 3-6-10 inches
Mounting Depth: 3-1/10″

Pioneer Car Audio Systems

Pioneer’s Mobile Business Group is known for offering the kind of in-car products that make driving more enjoyable by offering high quality audio and video, seamless connectivity and ease-of-use. Its focus is on the development of new digital technologies including audio video, navigation and satellite radio, while maintaining its strong heritage in products for car audio enthusiasts and sound competitors.


What’s in the Box

Pioneer TS-SW251 Subwoofer, Mounting Screws/Washers, Installation Guide



Find More Pioneer Car Amplifier Products

Portable AM/FM Radio in Teal
by Studebaker Portable AM/FM Radio in Teal(1) Buy new: CDN$ 28.89 3 used & new from CDN$ 28.89
by

No products found.

by

Pioneer TS-W2502D4 10 In. Champion Series PRO Subwoofer with 3000 Watts

Pioneer TS-W2502D4 10 In. Champion Series PRO Subwoofer with 3000 Watts

  • 10-inch Champion Series PRO subwoofer with 3000 Watts maximum (800 nominal) power handling
  • Basalt/carbon fiber reinforced IMPP cone with fiber-woven aramid surround
  • Dual 2-ohm voice coil for 2 or 8 ohm operation
  • 20 Hz to 150 Hz frequency response with 90 dB sensitivity
  • 169.2 millimeter mounting depth

Powerful Design To Deliver Deep Bass; Air Suspension System Allows Use In Extremely Small Enclosures; Recommended Enclosure: .35 ~ 0.7 Cu Ft~Pioneer’s TS-W2502D4 subwoofers are designed to produce powerful bass. Just take a look at the super-heavy-duty construction, designed to handle up to 3,000 watts max. Double-stacked magnets deliver higher power, and a step-up radial surround offers superior control and long excursions. Pioneer used a constructed cast-aluminum basket for this sub–add in a patented IMPP cone and you’ve got a monster sub that can handle whatever you want to throw at it.

Pioneer Champion Series PRO Subwoofers

Powerful by Design
Champion Series PRO subwoofers deliver incredible musicality heightened by booming bass–all in a versatile, compact design. Inspired by Pioneer’s strong SPL heritage, Champion PRO subwoofers deliver a remarkably powerful, accurate, and clear low-end that will transform your in-car audio experience.

Air Suspension System
Boasting big bass power, the patented air suspension technology of the Champion Series PRO subwoofer makes it a hard-hitting performer. The innovative architecture of the chamber creates a spring-like effect that compresses air, enabling the speaker to fit a 10-inch enclosure while delivering 12-inch bass sound.

Stealthy Installation
Masterfully engineered to deliver maximum sound in a minimal enclosure space, the Champion Series PRO subwoofer is designed to fit a variety of spaces. From under the front seats and behind the back seats, to inside doors and under the dash, your install can be customized to fit your needs.

Built to Last
The Champion Series PRO subwoofer combines innovative technology with top quality materials to consistently deliver superior performance. This subwoofer houses a three-layer, wide-roll, fiber-woven radial surround that provides phenomenal power handling with minimal distortion. The enduring strength of this subwoofer comes from its aluminum die-cast chassis, double stacked magnets, patented air suspension system, and rigid lightweight IMPP cone.



TS-W2502D4 Features

Air Suspension System
For its revolutionary 3.25 inch deep Shallow Subwoofer, Pioneer created an Air Suspension system effective within a 70% smaller-than-previous enclosure that locks air for a spring-like effect between main and drive cones moving in unison. The result is consistently clear, powerful, wide-ranging bass response. The subwoofer’s dual cone structure maintains better sound linearity and reliability after hours of hard use than conventional subwoofers with “spider” structures to keep the voice coil aligned. This incredible technology is applied to this new generation of high output, high performance subwoofers.

Double-Stack Magnet with Double-Stack Top Plate
To produce the tremendous magnetic energy we envisioned for this sub, we employed double-stacked magnets, weighing a hefty 110oz, and a double-stacked top plate above them. This design ensures positive, powerful control of the voice coil during those long excursions–and it’s one reason you can ring up those high SPL numbers.

Wide-Roll 3-Layer Fiber Radial Surround
A sub’s surround plays a key role in a speaker’s performance. In order for bass response to be clear and tight, the surround has to respond evenly around its entire circumference without flexing or puckering, even at high volume levels. That’s why Pioneer created a surround consisting of two layers of urethane with a layer of interwoven fiber between them. It’s strong, stable, and it reduces distortion. In addition, the wider-than-normal design provides a long, linear excursion for excellent control and heavy-duty durability.

Interlaced Basalt/Carbon Fiber Reinforced IMPP Cone
To ensure that you get more natural bass, Pioneer incorporated their new Basalt fiber technology into their shallow subwoofers. The volcanic-rock fibers create a cone that is lightweight, rigid, well damped, stable in temperature extremes, and more . In short, this bass really rocks.

Cast Aluminum Basket
Designed from scratch by Pioneer, this one-piece aluminum basket assembly holds the motor assembly, cone, and magnet structure securely in place. The benefits of this design: reduced internal stress, superior damping, and increased magnetic efficiency.

Dual Voice Coil
The TS-W2502D2/D4 provides two voice coils, each either at dual 2 or dual 4 ohms. So you can use a low-impedance amp to produce much bigger, much more powerful bass. More options, more power: that’s what DVC is all about. The Bridging Adapter is included for an easy Single Voice Coil hookup. It becomes a Single 4 Ohm or Single 8 Ohm with Bridging Adapter for ultimate flexibility for use with modern mono amplifiers

Add Newly Designed Spoke Grilles
We also recommend covering up your subwoofer with the UD-G308 . This stylish spoke grille is a must add-on when building a system and gives the look of pure professionalism.

Click images above to enlarge.


TS-W2502D4 Specs

Size: 10-Inch
Woofer Cone Material: Interlaced Basalt/Carbon Fiber Reinforced IMPP Cone
Surround: Wide-Roll, 3-Layer Fiber Woven Aramid Radial with Honeycomb Cloth
Voice Coil: Dual 4-Layer, Long Voice Coil
Voice Coil Wire: Copper
Voice Coil Bobbin: Phenol Resin Coated Glass Cloth
Magnet Construction: Double Stacked (88oz)
Basket Design: Aluminum Die-Cast Rigid Chassis
Gasket: 1-Piece ABS
Wire Terminals: Integrated Single-Sided Silver Compression Terminals
Watts MAX. Music Power: 3000 Watts
Watts Nominal Power Handling: 800 Watts
Frequency Response: 20 Hz to 150 Hz
Sensitivity: 89 dB
Ohm Rating: 2 or 8 ohm
Recommended Enclosure: 0.35 ~~ 0.7 Cubic Feet
Dimensions: 283.1 mm x 192.6 mm
Mounting Depth: 169.2 mm
Accessory Grill: UD-G258

Pioneer Car Audio Systems

Pioneer’s Mobile Business Group is known for offering the kind of in-car products that make driving more enjoyable by offering high quality audio and video, seamless connectivity and ease-of-use. Its focus is on the development of new digital technologies including audio video, navigation and satellite radio, while maintaining its strong heritage in products for car audio enthusiasts and sound competitors.


What’s in the Box

Pioneer TS-W2502D4 Subwoofer, Mounting Screws/Washers, Installation Guide~



Related Pioneer Car Amplifier Products

No products found.

by

No products found.

by

Pioneer TS-W3002D4 12 In. Champion Series PRO Subwoofer with 3500 Watts Reviews

Pioneer TS-W3002D4 12 In. Champion Series PRO Subwoofer with 3500 Watts

  • 12-inch Champion Series PRO subwoofer with 3500 Watts maximum (1000 nominal) power handling
  • Basalt/carbon fiber reinforced IMPP cone with fiber-woven aramid surround
  • Dual 4-ohm voice coil for 2 or 8 ohm operation
  • 20 Hz to 150 Hz frequency response with 90 dB sensitivity
  • 188.8 Millimeter mounting depth

PIONEER TS-W3002D4 12-Inch Champion Series PRO Subwoofer~Pioneer’s TS-W3002D4 subwoofers are designed to produce powerful bass. Just take a look at the super-heavy-duty construction, designed to handle up to 3,500 watts max. Double-stacked magnets deliver higher power, and a step-up radial surround offers superior control and long excursions. Pioneer used a constructed cast-aluminum basket for this sub–add in a patented IMPP cone and you’ve got a monster sub that can handle whatever you want to throw at it.

Pioneer Champion Series PRO Subwoofers

Powerful by Design
Champion Series PRO subwoofers deliver incredible musicality heightened by booming bass–all in a versatile, compact design. Inspired by Pioneer’s strong SPL heritage, Champion PRO subwoofers deliver a remarkably powerful, accurate, and clear low-end that will transform your in-car audio experience.

Air Suspension System
Boasting big bass power, the patented air suspension technology of the Champion Series PRO subwoofer makes it a hard-hitting performer. The innovative architecture of the chamber creates a spring-like effect that compresses air, enabling the speaker to fit a 10-inch enclosure while delivering 12-inch bass sound.

Stealthy Installation
Masterfully engineered to deliver maximum sound in a minimal enclosure space, the Champion Series PRO subwoofer is designed to fit a variety of spaces. From under the front seats and behind the back seats, to inside doors and under the dash, your install can be customized to fit your needs.

Built to Last
The Champion Series PRO subwoofer combines innovative technology with top quality materials to consistently deliver superior performance. This subwoofer houses a three-layer, wide-roll, fiber-woven radial surround that provides phenomenal power handling with minimal distortion. The enduring strength of this subwoofer comes from its aluminum die-cast chassis, double stacked magnets, patented air suspension system, and rigid lightweight IMPP cone.



TS-W3002D4 Features

Air Suspension System
For its revolutionary 3.25 inch deep Shallow Subwoofer, Pioneer created an Air Suspension system effective within a 70% smaller-than-previous enclosure that locks air for a spring-like effect between main and drive cones moving in unison. The result is consistently clear, powerful, wide-ranging bass response. The subwoofer’s dual cone structure maintains better sound linearity and reliability after hours of hard use than conventional subwoofers with “spider” structures to keep the voice coil aligned. This incredible technology is applied to this new generation of high output, high performance subwoofers.

Double-Stack Magnet with Double-Stack Top Plate
To produce the tremendous magnetic energy we envisioned for this sub, we employed double-stacked magnets, weighing a hefty 110oz, and a double-stacked top plate above them. This design ensures positive, powerful control of the voice coil during those long excursions–and it’s one reason you can ring up those high SPL numbers.

Wide-Roll 3-Layer Fiber Radial Surround
A sub’s surround plays a key role in a speaker’s performance. In order for bass response to be clear and tight, the surround has to respond evenly around its entire circumference without flexing or puckering, even at high volume levels. That’s why Pioneer created a surround consisting of two layers of urethane with a layer of interwoven fiber between them. It’s strong, stable, and it reduces distortion. In addition, the wider-than-normal design provides a long, linear excursion for excellent control and heavy-duty durability.

Interlaced Basalt/Carbon Fiber Reinforced IMPP Cone
To ensure that you get more natural bass, Pioneer incorporated their new Basalt fiber technology into their shallow subwoofers. The volcanic-rock fibers create a cone that is lightweight, rigid, well damped, stable in temperature extremes, and more . In short, this bass really rocks.

Cast Aluminum Basket
Designed from scratch by Pioneer, this one-piece aluminum basket assembly holds the motor assembly, cone, and magnet structure securely in place. The benefits of this design: reduced internal stress, superior damping, and increased magnetic efficiency.

Dual Voice Coil
The TS-W3002D2/D4 provides two voice coils, each either at dual 2 or dual 4 ohms. So you can use a low-impedance amp to produce much bigger, much more powerful bass. More options, more power: that’s what DVC is all about. The Bridging Adapter is included for an easy Single Voice Coil hookup. It becomes a Single 4 Ohm or Single 8 Ohm with Bridging Adapter for ultimate flexibility for use with modern mono amplifiers

Add Newly Designed Spoke Grilles
We also recommend covering up your subwoofer with the UD-G308 . This stylish spoke grille is a must add-on when building a system and gives the look of pure professionalism.

Click images above to enlarge.


TS-W3002D4 Specs

Size: 12-Inch
Woofer Cone Material: Interlaced Basalt/Carbon Fiber Reinforced IMPP Cone
Surround: Wide-Roll, 3-Layer Fiber Woven Aramid Radial with Honeycomb Cloth
Voice Coil: Dual 4-Layer, Long Voice Coil
Voice Coil Wire: Copper
Voice Coil Bobbin: Phenol Resin Coated Glass Cloth
Magnet Construction: Double Stacked (114oz)
Basket Design: Aluminum Die-Cast Rigid Chassis
Gasket: 1-Piece ABS
Wire Terminals: Integrated Single-Sided Silver Compression Terminals
Watts MAX. Music Power: 3500 Watts
Watts Nominal Power Handling: 1000 Watts
Frequency Response: 20 Hz to 150 Hz
Sensitivity: 90 dB
Ohm Rating: 2 or 8 ohm
Recommended Enclosure: 0.50 ~~ 1.0 Cubic Feet
Dimensions: 329 mm x 214.2 mm
Mounting Depth: 188.8 mm
Accessory Grill: UD-G308

Pioneer Car Audio Systems

Pioneer’s Mobile Business Group is known for offering the kind of in-car products that make driving more enjoyable by offering high quality audio and video, seamless connectivity and ease-of-use. Its focus is on the development of new digital technologies including audio video, navigation and satellite radio, while maintaining its strong heritage in products for car audio enthusiasts and sound competitors.


What’s in the Box

Pioneer TS-W3002D4 Subwoofer, Mounting Screws/Washers, Installation Guide~



More Pioneer Car Amplifier Products

No products found.

by

No products found.

by

Pioneer GM-X922 GM-X1022 Service Maintenance Manual

Pioneer GM-X922 GM-X1022 Service Maintenance Manual

Professionals copy of the Pioneer GM -X922 and GM-X1022 amplifier service manual.
Manual has 110 lbs cardstock front and back covers and is professionally spiral bound for ease of use and longevity. It is very durable



More Pioneer Car Amplifier Products

No products found.

by

No products found.

by

Pioneer GM-6400F 600-Watt, 4-Channel Power Amplifier

Pioneer GM-6400F 600-Watt, 4-Channel Power Amplifier

  • Four-channel car amplifier with 600-watt max power capability
  • Delivers 60 watts x 4 at 4 ohms, 150 watts x 2 at 4 ohms, or 75 watts x 2 at 2 ohms
  • Selectable low-pass filter (80 Hz, 12 dB per octave)
  • Preamp- and speaker-level inputs for connecting to most source units

Pioneer Gm-6400F 600-Watt, 4-Channel Power AmplifierThe 4-channel GM-6400F delivers a whopping 600 watts max (60 watts x 4 or 150 watts x 2 at 4 ohms; 75 watts x 4 at 2 ohms)–plenty of juice to power your high-quality speakers. It’s also got built-in 4-channel crossovers. Speaker level inputs for easy connection to an OEM headunit. Oversized power terminals. And a wide input level of 400mV to 6.5V.

Pioneer GM Series Amplifiers

A Solid Foundation
Adding an amplifier to your vehicle redefines your in-car experience, and can completely change the way you listen to your favorite music. The Pioneer GM series amplifiers are designed to add loads of much-needed volume, chest-thumping power, and heightened clarity.

Solid Value
GM series amplifiers provide exceptional value. Get more watts-per-dollar compared to competing brands, and save money to build other components in your system.

Bridgeable Operation
These bridgeable amplifiers also allow for more power as your needs grow. By combining the power of multiple channels to drive different system configurations, you can take your system to a whole new level of sound.



GM-6400F Features

600-Watt Max Power
Anybody have a problem with more power? We didn’t think so. The GM-6400F packs an impressive wallop despite its small size, with 760-watt max power capability. It can run 60 watts x 4 at 4 ohms, 150 watts x 2 at 4 ohms, or 75 watts x 4 at 2 ohms–whichever best fits your system configuration.

Built-In Crossover (80Hz Low-Pass Filter)
Built into the GM-6400F is a very smart crossover network. It works like a gateway, routing the big bass signals (80Hz or lower, at -12dB/octave) to the speaker that handles them best, filtering out higher-frequency signals to that speaker. This optimizes your system’s efficiency and delivers the best possible sound quality.

Speaker Level Inputs
The GM-6400F’s speaker level inputs allow you to connect your OEM unit (or any unit that doesn’t have the typical RCA-type inputs) without having to buy add-on adapters. The install goes faster, you save money, and you’ve got a Pioneer amp in your vehicle.

Gain Control
What is power without control? To accommodate the varying range of signal levels coming from today’s factory and aftermarket radios, all of Pioneer’s GM-series amplifiers feature adjustable gain controls. This means that no matter what kind of radio is connected to this amplifier, the appropriate gain control adjustment can be made to ensure loud, clear, distortion-free music. And even if the gain control level is set improperly, Pioneer’s Gain Control Caution feature will automatically reduce the amplifier’s output until the headunit volume is decreased to acceptable levels. This added layer of protection helps to prevent damage from occurring to the amplifier and the speakers connected to it due to improper gain control adjustments.

Bass Boost
Selectable 50Hz Bass Boost gives you more control over how your music sounds. It lets you set the optimal bass level for each speaker/sub connected to the GM-6400F, so the tone controls from your headunit can do what they do best. And because this is selectable bass boost, you can set the level at 0dB, 6dB, or 12dB, whichever sounds best to you.


GM-6400F Specs

Peak Music Power: 600 Watts
Number of Channels: 4
Load Impedance Capability: 2~8 Ohm (Stereo)
4~8 Ohm (Bridged)
Continuous Power (4 ohm): 60W x 4
Continuous Power (2 ohm): 75W x 4
Continuous Power Bridged (4 ohm): 150W x 1
Frequency Response: 10Hz ~ 50kHz
Total Harmonic Distortion: <0.03%
Signal-to-Noise Ratio: >95dB
Dimensions: 10-1/2″ x2-1/2″ x 13-5/8″
Bridgeable: Yes
Channel # Capability: 4/3/2
Balanced Isolator Input Circuit: Yes
RCA Inputs: 4 Channel
Speaker Level Input: 4 Channel
Input Level Control: Hi-Volt (400mV ~ 6.5v)
Built-in Crossover: LPF/HPF (Front/Rear Independent)
Crossover Frequency Range: 80Hz, -12dB/Oct.
Warranty: 1 Year

Pioneer Car Audio Systems

Pioneer’s Mobile Business Group is known for offering the kind of in-car products that make driving more enjoyable by offering high quality audio and video, seamless connectivity and ease-of-use. Its focus is on the development of new digital technologies including audio video, navigation and satellite radio, while maintaining its strong heritage in products for car audio enthusiasts and sound competitors.


What’s in the Box
Pioneer GM-6400F Amplifier, Input Harness, Installation Hardware, Owner’s Manual



No products found.

by

No products found.

by

PIONEER KEH-P2030 IN-DASH CASSETTE PLAYER

PIONEER KEH-P2030 IN-DASH CASSETTE PLAYER

PIONEER KEH-P2030 IN-DASH CASSETTE PLAYER
FEATURES AUTO-REVERSE PLAY & PIONEER’S FAMOUS SUPERTUNER FM/AM SECTION; XM SATELLITE RADIO READY; BUILT-IN 40W X 4 AMPLIFIER & A 2-MODE LOUDNESS CONTROL ADJUSTS THE SOUND; CONTROLS ADD-ON PIONEER CD CHANGER; DETACHABLE FACE SECURITY (DFS)



No products found.

by

No products found.

by

4-Channel Class FD Bridgeable Amplifier – PIONEER

4-Channel Class FD Bridgeable Amplifier – PIONEER

4-Channel Class FD Bridgeable AmplifierPIONEER

  • Full-range Class FD 4-channel amplifier
  • 75W x 4
  • High quality & power performance
  • Compact size provides flexibility for installation in a variety of applications, from hideaway locations to full custom installs
  • Peak music power: 800W
  • Load imp capability: 2 ohms – 8 ohms
  • Freq resp: 10 Hz – 35 kHz

Pioneer Gm-D9500F 4-Channel Class Fd Bridgeable Amplifier
Mobile Audio and Video Accessories – Amplifiers



No products found.

by

No products found.

by

Pioneer GM-D7500M Class-D Mono Amplifier with 800 Watts Max. Power Reviews

Pioneer GM-D7500M Class-D Mono Amplifier with 800 Watts Max. Power

  • Mono subwoofer amplifier with 800-watt max power capability
  • Delivers continuous 200 watts x 1 at 4 ohms, 400 watts x 1 at 2 ohms
  • Variable low-pass filter crossover (40~240Hz, at -12 dB per octave)
  • Speaker-level inputs for connecting to most source units
  • 50Hz bass boost with level control (0dB, 6dB, or 12dB)

Pioneer Gm-D7500M 800-Watt Class D Mono AmplifierPioneer’s GM-D7500M mono Class-D amplifier delivers 200 watts x 1 at 4 ohms, or 400 watts x 1 at 2 ohms. That’s enough to provide your subwoofer with tight, efficient bass. Speaking of efficiency, the GM-D7500M’s Class-D design means less energy is wasted, so you gain more power with a smaller profile. A built-in crossover and bass boost circuit let you dial in the bass content to suit your vehicle.

Pioneer GM Digital Series Amplifiers

A Commanding Performance
Traditional analog amplifier designs are electrically and thermally inefficient–converting as little as 30% of their electrical power into acoustical energy, while the rest is wasted as heat. The dispersion of this excess heat requires large and heavy heatsinks, increasing the size and reducing the installation flexibility of a traditional analog amplifier. Pioneer’s GM Digital amplifiers utilize Class-D amplifier technology to produce a compact, high-power amplifier that converts as much as 70% of its input power to sound.

Serious Sound. Small Space.
The compact size of the GM digital amplifiers enables them to be installed in more places in your vehicle. If you want your system to be heard and not seen, Pioneer’s GM digital series is the perfect choice, as it’s both small and powerful. The advanced circuitry of the GM-7500M model for instance, is 45 percent smaller than its analog counterparts, increasing your installation options in tight spaces. Now you can enjoy superior audio amplification and installation flexibility from a compact product.

Bridge Your System With Digital
The GM Digital line of amplifiers has already earned an impressive reputation with Pioneer retailers and customers alike. This year, for the first time, a full-range solution joins the digital line-up in the form of the GM-D9500F. You can now harness the compact, powerful qualities of digital design to create a full-range, fully digital system.



GM-D7500M Features

Same Powerful Output from a More Compact Amp
100% of the power, 45% of the size–the superior efficiency of a Class-D amplifier means higher power output and greater compactness than an analog amplifier offers.

Efficiently Compact, Awesome Power
Class-D amplifiers overcome the inefficiencies of traditional Class-A or AB amplifiers. Pioneer’s Class-D amps transform very little power into heat so a higher percentage of the power supply (67 %) is transformed into the load. This results in a very compact amp which needs less input power to produce very high output power. The Class-D amplifier’s PWM (Pulse Width Modulator) modulates the original audio input signal with a triangulated signal wave which has a much higher fixed frequency. The result is a digital signal which contains both the input signal and a band of frequency components around the modulation frequency. A LPF (Low Pass Filter) then filters out the high frequency pulses and the resulting amplified output signal is then sent to the subwoofer and/or speakers.

Selectable 50Hz Bass Boost
Bass boost gives you more control over how your music sounds. It lets you set the optimal bass level for each speaker/sub connected to the GM-D7500M, so the tone controls from your headunit can do what they do best. And because this is selectable bass boost, you can set the level at 0dB, 6dB, or 12dB, whichever sounds best to you.

Built-In Crossover (40~240Hz Low-Pass Filter)
Built into the GM-D7500M is a very smart crossover network. It works like a gateway, routing the big bass signals (adjustable from 40 to 240Hz or lower, at -12dB/octave) and filtering out higher-frequency signals to that subwoofer. This optimizes your system’s efficiency and delivers the best possible sound quality.

Speaker Level Inputs
What, you DON’T own a Pioneer head unit? Well, we won’t hold it against you. In fact we’ll even help you build onto your system. The GM-D7500M’s speaker level inputs allow you to connect your OEM unit (or any unit that doesn’t have the typical RCA-type inputs) without having to buy add-on adapters. So, the install goes faster, you save money, and you’ve got a Pioneer amp in your vehicle.


GM-D7500M Specs

Peak Music Power: 800 Watts
Number of Channels: 1
Load Impedance Capability: 2~8 Ohm
Continuous Power (4 ohm): 200W x 1
Continuous Power (2 ohm): 400W x 1
Frequency Response: 10Hz ~ 240Hz
Total Harmonic Distortion: 0.03%
Signal-to-Noise Ratio: 80dB
Dimensions: 8-7/8″ x 2-14″ x 7-7/8″
Channel # Capability: 1
Class-D Design Yes
MOSFET Output Section Yes
Compression-Type Speaker Terminals Yes
Balanced Isolator Input Circuit: Yes
RCA Inputs: 2 Channel
Speaker Level Input: Yes
Input Level Control: Hi-Volt (200mV ~ 6.5v)
Built-in Crossover: Variable LPF
Crossover Frequency Range: 40~240Hz, -12dB/Oct.
Bass Level Control 50Hz, 0/6/9/12dB
Warranty: 1 Year

Pioneer Car Audio Systems

Pioneer’s Mobile Business Group is known for offering the kind of in-car products that make driving more enjoyable by offering high quality audio and video, seamless connectivity and ease-of-use. Its focus is on the development of new digital technologies including audio video, navigation and satellite radio, while maintaining its strong heritage in products for car audio enthusiasts and sound competitors.


What’s in the Box
Pioneer GM-D7500M Amplifier, Input Harness, Installation Hardware, Owner’s Manual



No products found.

by

No products found.

by

Pioneer VSX-859RDS VSX-859RDS-G Service Maintenance Manual

Pioneer VSX-859RDS VSX-859RDS-G Service Maintenance Manual

Professional’s copy of the Pioneer VSX-859RDS and VSX-859RDS-G manual.
Manual has 110 lbs cardstock front and back covers and is professionally spiral bound for ease of use and longevity. It is very durable



Find More Pioneer Car Amplifier Products

No products found.

by

No products found.

by

Pioneer GM-3400T 2-Channel Bridgeable Amplifier with 350 Watts

Pioneer GM-3400T 2-Channel Bridgeable Amplifier with 350 Watts

  • Two-channel car amplifier with 350-watt max power capability
  • Delivers 60 watts x 2 at 4 ohms, 150 watts x 1 at 4 ohms, or 75 watts x 2 at 2 ohms
  • Selectable low-pass filter (80 Hz, 12 dB per octave)
  • Preamp- and speaker-level inputs for connecting to most source units
  • One-year warranty

Pioneer Gm-3400T 350-Watt 2-Channel Bridgeable AmplifierA beefy power increase. An all-new design featuring an extruded heatsink with a brushed metallic surface. Speaker level inputs for easy connection to OEM headunits. Oversized power terminals. Bottom line? The 2-channel GM-3400T is a huge value in a small package.

Pioneer GM Series Amplifiers

A Solid Foundation
Adding an amplifier to your vehicle redefines your in-car experience, and can completely change the way you listen to your favorite music. The Pioneer GM series amplifiers are designed to add loads of much-needed volume, chest-thumping power, and heightened clarity.

Solid Value
GM series amplifiers provide exceptional value. Get more watts-per-dollar compared to competing brands, and save money to build other components in your system.

Bridgeable Operation
These bridgeable amplifiers also allow for more power as your needs grow. By combining the power of multiple channels to drive different system configurations, you can take your system to a whole new level of sound.



GM-3400T Features

350-Watt Max Power
Anybody have a problem with more power? We didn’t think so. The GM-3400T packs an impressive wallop despite its small size, with 350-watt max power capability. It can run 60 watts x 2 at 4 ohms, 150 watts x 1 at 4 ohms, or 75 watts x 2 at 2 ohms–whichever best fits your system configuration.

Built-In Crossover (80Hz Low-Pass Filter)
Built into the GM-3400T is a very smart crossover network. It works like a gateway, routing the big bass signals (80Hz or lower, at -12dB/octave) to the speaker that handles them best, filtering out higher-frequency signals to that speaker. This optimizes your system’s efficiency and delivers the best possible sound quality.

Speaker Level Inputs
The GM-3400T’s speaker level inputs allow you to connect your OEM unit (or any unit that doesn’t have the typical RCA-type inputs) without having to buy add-on adapters. The install goes faster, you save money, and you’ve got a Pioneer amp in your vehicle.


GM-3400T Specs

Peak Music Power: 350 Watts
Number of Channels: 2
Load Impedance Capability: 2~8 Ohm (Stereo)
4~8 Ohm (Bridged)
Continuous Power (4 ohm): 60W x 2
Continuous Power (2 ohm): 75W x 2
Continuous Power Bridged (4 ohm): 150W x 1
Frequency Response: 10Hz ~ 50kHz
Total Harmonic Distortion: 0.008%
Signal-to-Noise Ratio: >100dB
Dimensions: 11-13/16″x 2-3/8″x 7-5/8″ (300 mm x 60 mm x 194 mm)
Bridgeable: Yes
Channel # Capability: 2/1
Balanced Isolator Input Circuit: Yes
RCA Inputs: 2 Channel
Speaker Level Input: Yes
Input Level Control: Hi-Volt (400mV ~ 6.5v)
Built-in Crossover: Selectable LPF
Crossover Frequency Range: 80Hz, -12dB/Oct.
Warranty: 1 Year

Pioneer Car Audio Systems

Pioneer’s Mobile Business Group is known for offering the kind of in-car products that make driving more enjoyable by offering high quality audio and video, seamless connectivity and ease-of-use. Its focus is on the development of new digital technologies including audio video, navigation and satellite radio, while maintaining its strong heritage in products for car audio enthusiasts and sound competitors.


What’s in the Box
Pioneer GM-3400T Amplifier, Input Harness, Installation Hardware, Owner’s Manual



No products found.

by

No products found.

by

Car Audio Tags: