Polk Audio Car Amplifiers

Polk Audio Car Amplifiers

Polk Audio PA1200.1 Monoblock Power Amplifier

Polk Audio PA1200.1 Monoblock Power Amplifier

  • Monoblock amplifier for subwoofer use
  • Power handling: 1200 watts x 1 (1 ohm), 800 watts x 1 (2 ohm) and 400 watts x 1 (4 ohm) continuous power, 2400 watts x 1 (1 ohm) dynamic power
  • Double layer fiberglass epoxy printed circuit boards
  • 6-way smart system protection (SSP) circuits
  • High-speed MOSFET switching power supply

With over 1000 watts available, the Polk Audio PA1200.1 monoblock amplifier for subwoofer use is truly a powerhouse. Made to drive the largest subwoofers, such as Polk SR series, this amplifier is made to rock. Anodized extruded brushed-aluminum cover for maximum heat dissipation and great looks. Cast aluminum textured end caps for optimized heat dissipation and hiding of connectors. Solid aluminum logo and model panel back lit in cobalt blue. Remote Subwoofer Level Adjuster included. Externally Bridgeable with a second PA1200.1- for even more power. Bridged power is 2400 watts (2 ohm) continuous and 4800 watts dynamic power.



AmazonBasics 16-Gauge Speaker Wire - 100 Feet
by AmazonBasics AmazonBasics 16-Gauge Speaker Wire - 100 Feet(225) Buy new: CDN$ 12.99 CDN$ 11.99
by

No products found.

by

Polk Audio PA250.2 2-Channel Bridgeable Power Amplifier Reviews

Polk Audio PA250.2 2-Channel Bridgeable Power Amplifier

  • 2-channel, stereo, bridge-mono, or simultaneous stereo/mono operation power amplifier
  • Power handling: 90 watts x 2 (2 ohm) continuous power, 125 x 2 (2 ohm) dynamic power, or 250 x 1 (4 ohm) continuous power
  • Double layer fiberglass epoxy printed circuit boards
  • 6-way smart system protection (SSP) circuits
  • High-speed MOSFET switching power supply

The Polk Audio PA250.2 2-channel bridgeable power amplifier is a stereo amplifier that’s great for driving coax or component speakers. It can also be bridged for subwoofer operation. Cast aluminum textured end caps for optimized heat dissipation and hiding of connectors. Solid aluminum logo and model panel back lit in cobalt blue. Remote Subwoofer Level Adjuster included.



No products found.

by

No products found.

by

PSWI225 Polk Wireless Subwoofer (Black)

PSWI225 Polk Wireless Subwoofer (Black)

  • Floor firing wireless powered subwoofer
  • Compact ported enclosure features a rugged long-throw dynamic balance co-polymer driver with butyl rubber surround
  • 2.4-gigahertz wireless transmitter
  • Built-in subwoofer power amp with active crossover for accurate bass
  • Powerful 100 watt amplifier features adjustable low-pass crossover, phase switch and subwoofer volume control

Enjoying home theater just became a lot more convenient, thanks to the new PSWi225 Wireless Subwoofer. And because it’s wireless, there are no wires to run across a room; it’s compact size (12 1/2″ x 13″ x12 1/2″) frees you to place the PSWi225 where it looks best. One power plug and you’re done. The PSWi225 is the perfect complement to our passive SurroundBar Speaker Series, the SurroundBar360°DVD Theater for those who want even more bass, or any of our RM and TSi home theater system packages. The PSWi225 is also a quick, easy way to add thrilling home theater bass to your existing flat panel TV sound.



No products found.

by

No products found.

by

Polk Audio PA400.1 Monoblock Power Amplifier Reviews

Polk Audio PA400.1 Monoblock Power Amplifier

  • Monoblock amplifier for subwoofer use
  • Power handling: 400 watts x 1 (1 ohm), 300 watts x 1 (2 ohm) and 200 watts x 1 (4 ohm) continuous power, 800 watts x 1 (1 ohm) dynamic power
  • Double layer fiberglass epoxy printed circuit boards
  • 6-way smart system protection (SSP) circuits
  • High-speed MOSFET switching power supply

The Polk Audio PA400.1 monoblock power amplifier is a amplifier excellent for compact subwoofers in your vehicle. Cast aluminum textured end caps for optimized heat dissipation and hiding of connectors. Solid aluminum logo and model panel back lit in cobalt blue. Light Bar/Fan Output- Connect an optional LED light bar or cooling fan for custom installations. Remote Subwoofer Level Adjuster included.



Related Polk Audio Car Amplifier Products

No products found.

by

No products found.

by

Polk Audio PSW111 Subwoofer (Single, Black)

Polk Audio PSW111 Subwoofer (Single, Black)

  • Single 8-inch subwoofer with compression circuitry to limit distortion
  • Best matched for RM and SurroundBar series or compact speakers from other manufacturers
  • Non-resonant all-MDF enclosure construction and internal bracing
  • Rated to 150 watts of continuous power (300W peak)
  • Measures 12-1/8 x 11 x 13 inches (HxWxD)

PSW111 is best matched for RM and SurroundBar series or compact speakers from other manufacturers. You can put it practically anywhere and you won’t believe the punch such a small subwoofer packs. That’s why cnet says “the deep bass was impressively deep for a sub as small as the PSW111.” You can even play hide and seek with it. All woofers feature a floor coupled downward firing port. This configuration brings you maximum bass impact while keeping the front of the cabinet as low profile as possible. Polk home subwoofers are provided with CEA-2010 “Loud and Low” Spec. Instead of using the usual “inches and watts” method, we’ve leveled the playing field so you can easily and accurately compare the performance of different subwoofers measured the same way.

Best matched for RM and SurroundBar series or compact speakers from other manufacturers, the Polk Audio PSW111 compact powered subwoofer features an 8-inch composite woofer that packs a punch larger than its size would suggest–delivering powerful, accurate and musical bass at an affordable price. It measures 12-1/8 x 11 x 13 inches (HxWxD) and it has a continuous power rating of 150 watts (with 300W dynamic power rating).

Polk Audio PSW111 powered subwoofer in black

Polk Audio PSW111 powered subwoofer in black.

PSW Series Key Features

Floor Coupled Port

All woofers (except for PSW10) feature a floor coupled downward firing port. This configuration brings you maximum bass impact while keeping the front of the cabinet as low profile as possible.

Klippel Optimized Woofer

By using a state-of-the-art Klippel Distortion Analyzer, Polk engineers were able to optimize the woofer’s motor structure, voice coil alignment and suspension bringing you the best possible performance even at extreme listening levels.

Dynamic Balance

A Polk perfected method of analyzing a speaker’s microscopic behavior with laser Interferometry. Polk engineers can tune out unwanted resonance and distortion with the right combination of materials, geometry and construction techniques. This brings you pure, distortion free sound.

Multiple Hook Up Options

LFE, line and speaker level inputs, and speaker level inputs allow easy connection to any system.

Intelligent Amplifier

PSW Series subwoofers use intelligent amplifiers. This means, not only can they put gobs of power to your woofer, they’ll use very little power at low volumes or standby mode.



No products found.

by

No products found.

by

Polk Audio PSW505 12-Inch Powered Subwoofer (Single, Black)

Polk Audio PSW505 12-Inch Powered Subwoofer (Single, Black)

  • Single powered subwoofer in black for use with stereo or home theater speaker systems
  • Equipped with one magnetically shielded 12-inch long-throw woofer
  • Slot-load venting minimizes turbulence, noise, and distortion
  • Rated to 300 watts of continuous power (460W peak)
  • Measures 16-1/8 x 15-1/8 x 18-3/16 inches (HxWxD)

POLK PSW505 – This high quality powered subwoofer makes opens a whole new dimension of thrilling low end sound for audio and home theater systems alike. This versatile, clinically accurate beast handles bombs and bullets and delicate string sections with equal finesse. Polk Audio’s PSW series of powered subwoofers were designed to deliver powerful and astonishingly musical bass at amazingly low prices. All the PSW models represent an evolution and refinement towards a truly visceral home-theater bass experience that coordinate with Polk’s TSi and RM, and R/M/T Series Speakers for home sound that truly rivals the best that theater’s offer. Experience movies, music, shows and games like never before. Pick up a PSW subwoofer and feel its superb build quality. Polk Audio PSW-505 is comprised of top-notch quality components from the driver, the power amp, and the cabinetry to deliver the finest performance. Hi-Roll Surrounds to support longer excursion High current 300 Watt Continuous (460 Watt Dynamic) power amplifier Frequency Range – 23 Hz – 160Hz Adjustable low pass crossover, phase switchand volume control for perfect blending with any main speakers Unfiltered LFE input Magnetically shielded Auto on/off circuit that automatically turns your subwoofer on when it senses a program signal. When no signal is present, the amplifier turns off within 15 minutes Sturdy Feet keep the sub from sliding across the floor when played at high volumes Unit Dimensions – 16-1/8H x 15-1/8W x 18-3/16D; Weighs 56 pounds Warranty – 5 Years Parts and Labor Speaker; 3 Years Parts and Labor Amplifier Subwoofer cable required; not included. Monster Cable is recommended



No products found.

by

No products found.

by

Polk Audio PA200.4 4-Channel Bridgeable Power Amplifier

Polk Audio PA200.4 4-Channel Bridgeable Power Amplifier

  • 4-channel, dual bridge-mono (2-channel) power amplifier
  • Power handling: 35 watts x 4 (2 ohm) continuous power, 80 x 4 (2 ohm) dynamic power, or 100 watts x 2 (4 ohm) continuous power
  • Double layer fiberglass epoxy printed circuit boards
  • 6-way smart system protection (SSP) circuits
  • High-speed MOSFET switching power supply

With multiple configurations available, the Polk Audio PA200.4 power amplifier is ideal for audio setup use. 4-channel, dual bridge-mono (2-channel), or dual simultaneous stereo/mono operation provide a variety of configurations and setups: 4-channel for front and rear speakers; 2 speakers and a sub; as 2 subwoofers; or as 2 subs and 4-channels in passive-tri mode all allow you to set up your system the way you want to. Cast aluminum textured end caps for optimized heat dissipation and hiding of connectors. Solid aluminum logo and model panel back lit in cobalt blue. Remote Subwoofer Level Adjuster included.



No products found.

by

No products found.

by

Polk Audio PSW10 10-Inch Monitor Series Powered Subwoofer (Single, Black)

Polk Audio PSW10 10-Inch Monitor Series Powered Subwoofer (Single, Black)

  • Single 10-inch subwoofer in black with built-in high-current amplifier for big bass
  • Equipped with one 10-inch polymer-composite dynamic-balance cone driver
  • Laser-based Klippel measurement technology for improved linearity and deep, precise sound
  • Non-resonant all-MDF enclosure construction with 0.75-inch-thick baffles and internal bracing
  • Measures 14 by 14.38 by 16.12 inches (WxHxD)

PSW10 fills in the bottom end of your home theater system. Relieve your main speakers from performing bass duty and let them work on the mids and highs. PSW10 is a great addition to any subwooferless system and will bring your movie watching experience to the next level. All woofers feature a floor coupled downward firing port. This configuration brings you maximum bass impact while keeping the front of the cabinet as low profile as possible.



No products found.

by

No products found.

by

PA660 600W Class AB Bridgeable 4CH

PA660 600W Class AB Bridgeable 4CH

  • Handles up to 600W peak power @ 4 ohms (300 x 2) or 680W peak power @ 2 ohms
  • High-pass and low-pass crossover
  • 4 ohms impedance
  • Bipolar output transistors
  • Switchable 3-position bass boost

PA660 600W Class AB Bridgeable 4CH Car Amplifier



Related Polk Audio Car Amplifier Products

No products found.

by

No products found.

by

Polk Audio PA600.1 Monoblock Power Amplifier

Polk Audio PA600.1 Monoblock Power Amplifier

  • Monoblock amplifier for subwoofer use
  • Power handling: 600 watts x 1 (1 ohm), 400 watts x 1 (2 ohm) and 300 watts x 1 (4 ohm) continuous power, 1200 watts x 1 (1 ohm) dynamic power
  • Double layer fiberglass epoxy printed circuit boards
  • 6-way smart system protection (SSP) circuits
  • High-speed MOSFET switching power supply

The Polk Audio PA600.1 monoblock amplifier is a powerful amplifier excellent for the subwoofers in your vehicle. Cast aluminum textured end caps for optimized heat dissipation and hiding of connectors. Solid aluminum logo and model panel back lit in cobalt blue. Light Bar/Fan Output- Connect an optional LED light bar or cooling fan for custom installations. Remote Subwoofer Level Adjuster included. Externally Bridgeable with a second PA600.1- for even more power! Bridge power is 1200 watts continuous and 2400 watts dynamic power at 2 ohms.



Find More Polk Audio Car Amplifier Products

No products found.

by

No products found.

by

Car Audio Tags: