JBL Car Amplifiers

JBL Car Amplifiers

JBL MPS1000 10-Inch 250-Watt Powered Marine Subwoofer

JBL MPS1000 10-Inch 250-Watt Powered Marine Subwoofer

  • 10-inch, 250-watt powered marine subwoofer engineered for harsh marine conditions
  • Integrated amplifier and enclosure; mounts like a car subwoofer
  • Built-in 12dB electronic crossover allows adjustment between 70Hz and 170Hz
  • Built-in bass EQ provides 40Hz adjustment between -6dB and +3dB
  • Controls are located on the front panel under a watertight protective cover; one year warranty

JBL 10″ 250-Watt Powered Marine SubwooferUpgrade the sound on your boat with the MPS1000 10-inch, 250-Watt Powered Marine Subwoofer from JBL®. The MPS1000 offers the big, heart-thumping bass you need to break through the engine noise, waves, and gusty wind you will encounter on the water. Built to withstand harsh salt air and corrosion, the MPS1000 features a marinized circuit board with controls located on the front panel under a watertight, protective cover, as well as a polypropylene cone and stainless steel hardware–to withstand anything. With 12dB electronic crossovers, the MPS1000 offers tuning options for systems of all sizes while the variable bass-boost optimizes the performance even when you have limited placement options. Finally, thanks to its compact size and low heat sink, it is easy to install the MPS1000 in tight spaces.

Engineered for harsh marine conditions:

  • Controls located on the front panel under watertight, protective cover
  • Marinized circuit board
  • Polypropylene cone
  • Stainless steel hardware
  • Waterproofing

Tuning options for systems of any size:

  • Onboard 12dB electronic crossovers ensuring tuning options for systems of any size

Optimized performance in any location:

  • Variable bass-boost circuit provides additional bass tuning
  • Built-in bass EQ provides 40Hz adjustment between -6dB and +3dB

Easy installation in tight spaces:

  • Measures 9 by 10-1/4 by 2-3/16 inches
  • Subwoofer dimensions: 13-1/16 by 7-15/16 by 13 inches
  • Low profile heat sink
  • Integrated amplifier and enclosure
  • Mounts like a car subwoofer

Big, dynamic power:

  • Output of 60 watts RMS
  • Peak power handling of 160 watts

Audio Specifications:

  • Signal-to-Noise Ratio: 81.1dB
  • Maximum Current Draw: 14A
  • Input Sensitivity:
    • Line-Level Input: 100mV to 6V
    • Speaker-Level Input: 1V to 13V

What’s in the Box?
MPS 1000 10-Inch 250-Watt Powered Marine Subwoofer, mounting template, owner’s manual



Metra 70-8116 Factory Amplifier Bypass Harness for Select 2000-2004 Toyota Vehicles with Amplified JBL System

  • For 2000-04 Toyota vehicles with an amplified JBL system
  • Toyota power and amplifier bypass harness
  • 204″ Long
  • One 20-pin plug and one 16-pin amp plug
  • A factory amplifier bypass harness that includes 17 ft. of 16 ga. Wire

Product Features: Toyota power and amplifier bypass harness For 2000-04 Toyota vehicles with an amplified JBL system 204″ LongOne 20-pin plug and one 16-pin amp plug A factory amplifier bypass harness that includes 17 ft. of 16 ga. wire This harness is plugged in at the factory amplifier and ran to the location of the aftermarket radio or the aftermarket amplifier Authorized Internet Dealer 1-year Manufacturer’s warranty



Related Jbl Car Amplifier Products

BOSS AUDIO MGR350B Marine Gauge MECH-LESS Receiver, with Audio Streaming
by Boss Audio Systems, Inc. BOSS AUDIO MGR350B Marine Gauge MECH-LESS  Receiver, with Audio Streaming(17) Buy new: CDN$ 112.87 CDN$ 112.46 13 used & new from CDN$ 104.98
by

No products found.

by

JBL GTO3501 Grand Touring 360 Watts Mono Subwoofer Amplifier

JBL GTO3501 Grand Touring 360 Watts Mono Subwoofer Amplifier

  • 360-Watt Mono Subwoofer Amplifier
  • Remote bass-level control included
  • RCA low-level preamp outputs
  • RCA low-level preamp inputs
  • CEA-2006A compliant

JBL 360-Watt Mono Subwoofer Amplifier



Rockford Fosgate Prime R1693 6 x 9-Inch Full-Range 3-Way Speakers (Pair)

  • 6-by-9-inch three-way speaker with 120 watts maximum power handling (60 watts RMS)
  • Mica-injected polypropylene cone with foam surround
  • 1/2-inch mylar balanced dome tweeter and 1.75-inch mylar midrange
  • Built-in tweeter high-pass filter
  • 48Hz – 22kHz frequency response with 89dB sensitivity

Rockford Fosgate Prime 6×9-Inch Full range 3 way speakers. Speakers feature Mica Injected polypropolene cone and .5-Inch Mylar balanced dome tweeter. CEA Certified 60 Watts RMS, 120 Watts peak power rating. Visit www.RockfordFosgate.com 24 hours a day for technical support or call (800)669-9899 M-F 7 am to 5 pm MST.These 6-by-9-inch Prime full-range speakers offer Rockford Fosgate sound quality at a fantastic value. Perfect for replacing factory speakers, they feature Mica injected polypropylene cones and a mylar balanced dome tweeter. Includes grilles so they look as good as they sound.

The Rockford Fosgate Prime Series

A new generation of performance geared toward the “novice” car audio enthusiast, the Prime series full-range and component speakers feature legendary Rockford Fosgate sound quality while fitting into any budget.



R1693 Features

Mica Injected Polypropylene Cone With Rubber Surround

  • Adds strength and rigidity
  • Provides resiliency against high power output
  • Full bodied sound

18 AWG Stamped Steel Frame

  • Textured abrasion resistant powder coated finish
  • Direct OEM mounting applications
  • Shallow mounting depth

1/2-Inch Mylar Balanced Dome Tweeter

  • Lightweight mylar combines high sensitivity and smooth extended frequency response
  • Ensures low distortion
  • Provides an open sound stage

Factory replacement speaker delivering authentic Rockford Fosgate sound.
Click to enlarge.


R1693 Specifications

Configuration: 3-Way Full-Range
Midrange Diameter: 6″x9″
Midrange Depth: 2.85″ (72.40cm)
Tweeter Diameter: 0.5″
Tweeter Depth: n/a
Frequency Response: 48Hz – 22kHz
Power Handling: 60 Watts RMS
120 Watts Max
Crossover: Tweeter High-Pass (HP): 6dB
Sensitivity: 89dB @ 1 watt/1 meter
Grilles Included: Yes
Mounting Hardware: Yes

Thirty Years of Rockford Fosgate

Rockford Fosgate products have been designed and engineered in Tempe, Arizona since the beginning. Rockford’s 30 year reputation is grounded in engineering and manufacturing some of the finest audio products in the world. The company’s no-compromise approach has yielded patented iconic products such as the Punch EQ, Punch 45 amplifier and the 3Sixty integrated signal processor. Today, Rockford’s new products push the performance envelope even further. Each new product is a step forward–they sound bigger, they play louder, and run longer. Rockford never settles for “good enough.”

The 2010 product line represents the company’s core philosophy. Rockfords new amplifiers, speakers and subwoofers have raised the bar on the competition.


What’s in the Box

Rockford Fosgate Prime R1693 6×9-Inch Full Range 3 Way Speakers, Trim Rings, Mounting Hardware, User’s Manual


Want a Little Extra?

For those willing to invest a bit more, Rockford also offers the Punch Series P1664C and Power Series T1693 6-by-9-inch full-range speakers.


Prime Series Full-Range Speakers

Rockford Fosgate Prime R152 5.25-Inch Full Range Coaxial Speakers Rockford Fosgate Prime R1682 6×8-Inch Full Range coaxial Speakers Rockford Fosgate Prime R1653 6.5-Inch Full Range 3 Way Speakers Rockford Fosgate Prime R1693 6×9-Inch Full Range 3 Way Speakers



No products found.

by

No products found.

by

Jbl GTO-504EZ 4-channel Car Amplifier

Jbl GTO-504EZ 4-channel Car Amplifier

RMS Power Rating: 4 ohms: 50 watts x 4 chan, 2 ohms: 75 watts x 4 chan, Bridged 4 ohms: 150 watts x 2 chan, Class AB, Preamp outputs, Speaker-level inputs, Variable LP/HP Filter 40Hz – 220Hz



No products found.

by

No products found.

by

JBL GTO6428 4-Inch x 6-Inch 2-Way Loudspeaker

JBL GTO6428 4-Inch x 6-Inch 2-Way Loudspeaker

  • 4 x 6″ two-way plate loudspeaker
  • Plus One woofer cone with rubber surround
  • Adjustable mylar-titanium tweeter with level control
  • 120 Watts peak power handling; 2 ohm impedance
  • Two-inch mounting depth

JBL 4×6 2-Way Loudspeaker 120W Power HandlingThis speaker includes some of JBL’s top tech. Its Plus One cone has more surface area than that found on competing models of the same size. Its My-Ti tweeters (Mylar/titanium composite) offer increased power handling, reduced distortion and increased efficiency. And it can be safely driven by any head unit.


The GTO tweeter is both strong and light weight while being adjustable

Why JBL Sound?

For more than 60 years, JBL products have been bringing home the impact and excitement of the world’s best recording studios, movie theaters and concert venues. Now, JBL engineers are creating these world-class listening experiences in the car. Thanks to advanced technology developed in the professional arena, JBL mobile products simply sound better than the competition. High output, superb bass response, long life and smooth response are all things you can expect from any speaker that wears the JBL badge. So join enthusiasts who know audio, and don’t settle for anything but JBL in your vehicle. Bring the sound of the show on the road.

Listen Loud
The last thing you want to worry about is the quality of your speakers. We understand. All new JBL mobile products have to go through nearly 500 hours of environmental testing. We put them under temperatures fluctuating between -35° C and +90° C with up to 90 percent air humidity for more than 200 hours. We expose speakers to UV light for more than 150 hours to simulate a mounting location on a car’s rear deck. We even shake things up, as all of our new mobile audio products have to pass extensive vibration testing before we release them for production. We’ve made unparalleled efforts to ensure the best possible quality so that you can listen long and loud when you crank up a JBL speaker.

Edge-Driven, Mylar-Titanium Tweeter
The JBL GTO6428 uses a 1-inch (25-millimeter) Mylar-titanium (My-Ti) tweeter with a large voice coil–much like a voice coil found in high-end home audio speakers. The benefit of the Mylar and titanium blend in making a tweeter is that it is lightweight and has remarkable strength. At the same time, its large voice coil increases power handling and reduces distortion at high output levels. This tweeter design also helps create more seamless integration with the woofer. The result? True, high-end, audiophile-quality performance.

Built-in Crossover Networks
Typical entry level mobile loudspeakers use low performance bass blockers to keep bass from going to the tweeter. Well, the JBL GTO6428 is not your typical entry-level loudspeaker. By using a built-in crossover network with advanced high and low pass filters, the GTO6428 creates a smooth transition between the woofer and tweeter. The result? Midrange vocals that sound so natural and lifelike you think you the artist were right in the car with you.


The Plus One woofer cone increases
bass output and efficiency

Bass that Booms

Plus One Cone
The JBL GTO6428 uses a 4″ X 6″ woofer with the patent-pending JBL Plus One cone technology. Plus One technology gives the GTO6428 more cone surface than competing models of the same size–up to 30 percent more in many cases. With a larger cone area, the GTO6428 speakers provide higher efficiency and better bass response. Add a low-Q woofer design for higher bass output from the typical mounting location and 120-watt peak power handling, and the GTO6428 will really get your car booming.


Look for the True 4 ohm logo for the best real world performance

Powerful Performance

True 4-Ohm Topology
Low-impedance speaker voice coils extract more power from your amp for more powerful performance than high-impedance coils do. JBL GTO6428 speakers use a lower-impedance voice coil than a typical 4-ohm speaker to extract the most power possible from all amplifiers engineered to drive loads of 4 ohms or less. And the GTO6428 is compatible with both aftermarket head units and factory-installed systems. Since many factory-installed systems incorporate 2-ohm speakers and include amplifiers designed to drive 2-ohm loads, replacing those reduced-impedance speakers with a typical 4-ohm model will reduce the power output from the amplifier. For the most powerful performance, the GTO6428 makes the best use of any amplifier by providing an optimum 2-ohm load.

An Easy Install

No special tools needed
Doing it yourself? JBL makes installing the GTO6428 speakers a breeze. Designed as replacements for factory-installed OEM speakers, they easily install into nearly any factory-built 4″ X 6″ locations without any special tools or additional modifications. If you are upgrading an older set of aftermarket speakers, the GTO6428’s easy installation makes replacement simple as well. You’ll be listening to your new JBL speakers in no time at all.

The JBL GTO6428s deliver high output, superb bass response, long life and smooth response.

Highlights

  • Great JBL Sound Quality
  • Plus One woofer cones for the high output and deep bass
  • True 4-Ohm design pulls the most power out of your system
  • Easy to install

What’s in the Box
One pair of JBL GTO6428 2-way loudspeakers, one set of installation hardware



No products found.

by

No products found.

by

JBL WEM-1 50-Watt Wireless Amplifier and Expansion Module (Black)

JBL WEM-1 50-Watt Wireless Amplifier and Expansion Module (Black)

  • The JBL WEM-1 can transmit music throughout your home.
  • Can transmit music up to 70 feet.
  • Comes with a 50 watt amplifier.
  • Add surround speakers to your home theater system without having to run wires.
  • Connect to your computer and enjoy your music library anywhere in your home.

The JBL WEM-1 is a Wireless Expansion Module that allows you to make any loudspeaker (not included) wireless. Included is a transmitter that wirelessly transmits a signal up to 70 feet. The WEM-1 includes a receiver/amplifier that receives the wireless signal and drives any pair of loudspeakers with its internal 50-watt amplifier. The transmitter connects to the source using either line or speaker level inputs. The receiver/amplifier also offers equalization settings for several speakers. A local input allows you to hook up a portable device or gaming system to the amplifier. 2.4GHz technology – ensures high-performance sound up to 70 feet from transmitter 50-watt per channel digital amplifier Local input for your video game, iPod, or other portable music player Line- and speaker-level inputs Subwoofer output Frequency Range (+0, -1dB) – 20Hz – 20kHz S/N Ratio – 80dBA In the box – Owner’s manual USA warranty sheet 1 x Receiver-amplifier module 1 x Power supply for receiver-amplifier 1 x 120V AC power cord for receiver-amplifier power supply Remote Control 2 x Wall-mount brackets for receiver 1 x Pedestal 1 x Transmitter module 1 x Power supply for transmitter 1 x 120V AC power cord for transmitter power supply 1 x 6′ Audio stereo cable, RCA-RCA 1 x Wall-mount bracket for transmitter 2 x Panhead M3 x 4 machine screws 4 x Small, round, self-adhesive feet Unit Dimensions (H x W x D) – 1-1/8 x 6 x 3-7/8, Weight – 0.6 lb (Transmitter); 1-1/8 x 6-3/16 x 4-5/8, Weight – 0.9 lb (Receiver)



Find More Jbl Car Amplifier Products

No products found.

by

No products found.

by

JBL MS-A1004 100 Watt x 4-Channel Amplifier

JBL MS-A1004 100 Watt x 4-Channel Amplifier

  • Four-channel power amplifier–100 watts x 4 @ 4 ohms; 100 watts x 4 @ 2 ohms; bridgeable 200 watts x 2 @ 4 ohms
  • RCA to bare-wire adapters work with all line-level and speaker-level inputs, with switch and Hi2 setting
  • Graphical set-up/status displays for both channel pairs with crossover types, frequency readout
  • Digital input mixer allows any input signal to be routed to any speaker output
  • Digital signal processing for precise control of all input mixer, electronic crossover, and output levels

4 ohms: 100 watts x 4 chan, 2 ohms: 100 watts x 4 chan, Bridged, 4 ohms: 200 watts x 2 chan, Class D, Digital signal processing amplifier, Optional Wireless Bass Remote, Graphical Status Display, Hi2

Unprecedented Design and Flexibility

There’s nothing wrong with your car audio system that real power can’t fix. The JBL MS-A1004 is a compact 4-channel amplifier that gives you up to 400 watts of raw power to use any way you see fit. It connects to any line-level or speaker-level output, and features onboard displays for easy, foolproof installation and configuration. A digital input mixer lets you map your inputs to any speaker outputs, and sophisticated network circuitry puts you in precise control of the crossover points and slopes of each channel pair. With great power comes great possibilities–not to mention great sound–and the MS-A1004 delivers on all counts.

JBL Brand

For more than 60 years, JBL has been delivering world-class listening experiences wherever great sound matters.

Why JBL Sound?

We didn’t invent car audio, but we did reinvent the way you upgrade your car audio system. When Hollywood made a long-term commitment to cinema sound in 1927 with the film The Jazz Singer, JBL sound was there. When Jimi Hendrix electrified the stage at Woodstock in 1969, JBL sound was there. For more than 60 years, JBL products have been bringing home the impact and excitement of the world’s best recording studios, movie theaters, and concert venues. For years, JBL engineers have been creating these world-class listening experiences in the car. Thanks to advanced technology developed in the professional arena, JBL mobile products simply sound better than the competitions’. High output, easy setup and complete connectivity are all things you can expect from any amplifier that wears the JBL badge. And now JBL engineers have completely revolutionized amplifiers with the incredibly flexible MS amplifiers.

The MS-A1004’s sleek, slim design allows it to be installed nearly anywhere.

Improve the Sound of Your System

Good, clean power is the key to making any speaker sound its best, and the new JBL MS-A1004 4-channel amplifier delivers. At 100 watts X 4 (2 ohms or 4 ohms), the MS-A1004 will improve the fidelity of your speakers by giving them all the clean power they need. The MS-A1004 can even be bridged down to two channels to put out 200 watts X 2 into 2 ohms for systems in which high power is needed. And it does this all in a footprint small enough to tuck away nearly anywhere.

Flexible Connectivity

JBL engineers have designed the MS-A1004 to offer flexible connectivity no matter how you plan to build the amplifier into your system.

High-Quality Speaker Outputs

The MS-A1004 features high-quality speaker outputs that offer the use of up to 10AWG wire. This ensures minimal power loss for the most output and sound possible going to your speakers.

The MS-A1004 is easy to install and maximizes performance with high-quality connections.

A unique graphical display makes setup and optimization simple.

The optional wireless bass control makes adjusting bass on the fly easy and is easy to install.

Connects to Any Analog Signal

To make installation into nearly any system a breeze, the MS-A1004 comes with RCA to bare-wire adapters that work with all line-level and speaker-level inputs. This means installation is easy and performance is maximized with no drop in signal. A simple switch allows you to match the input to the signal type, and with the Hi2 setting, it can even be used in conjunction with a factory amplifier. And since the MS-A1004 has a digital input mixer that allows any input signal to be routed to any speaker output, installation is simplified even further. We’ve made it easy.

Pass-Through Audio Outputs

Building the system of your dreams? The pass-through audio outputs on the MS-A1004 allow you to use multiple amplifiers with a signal source, including the matching MS-A5001 mono subwoofer amplifier.

Graphical Setup and Status Display

Unlike the typical car amplifier, the MS-A1004 uses graphical display on the top of the amplifier for system setup, tweaking, and operational status. This display simplifies setup by using icons for the crossover types, along with a readout of the crossover frequencies by channel. An easy-to-use rotary control lets you dial in the setup precisely. Plus the sophisticated design makes the amplifier look great.

Advanced Circuitry

Sophisticated Crossover Functionality

The MS-A1004 offers unprecedented crossover control and functionality. Outputs can be set to low-pass, high-pass, or even band-pass filtered. And with 97 different crossover points from 20Hz to 20kHz, along with selectable slopes (6dB, 12dB, or 24dB), you can precisely tune your amplifier for any subwoofer you may use.

Digital Signal Processing

At the heart of the MS-A1004 is advanced digital signal processing, which controls the input mixer, electronic crossovers, and all output-level functions. Paired with precise user-selectable band filters, crossover points, and crossover slopes, the DSP optimizes sound quality for the speakers you happen to be using. In fact, the MS-A1004 even comes with an input-level CD to make precise tuning and optimization a snap. Getting the best sound out of your system couldn’t be easier.

Complete Control

Wireless Bass Control Compatibility

If you really want to fine-tune your system on the fly, the MS-A1004 is compatible with the JBL MS-WBC wireless bass control knob (sold separately). It gives you control of your bass from the driver’s seat without having to run any additional wires.

Highlights

  • 4-channel amplifier–100 watts X 4 (2 ohms or 4 ohms)
  • Bridgeable to two channels–200 watts X 2 (2 ohms)
  • Low-level and high-level inputs with RCA adapters
  • Speaker outputs with 10AWG compatibility
  • Selectable high- and low-pass filters–(20Hz-20kHz; 6dB, 12dB, or 24 dB/octave)
  • Digital signal processing –Precise, user-selectable band filters, crossover points, and slopes.
  • CD for system setup
  • Graphical user interface for setup and status
  • Compatible with the JBL MS-WBC wireless bass control knob (sold separately)
  • Sleek, slim design fits nearly anywhere

What’s in the Box

JBL MS-A1004 DSP amplifier


Build your System

JBL MS-8

The JBL MS-8 digital processor will automatically equalize and optimize any vehicle’s performance in about ten minutes flat by maximizing frequency response, bass performance, dynamics, clarity, detail, and stereo imaging

JBL MS-A5001

The JBL MS-A5001 subwoofer amplifier delivers all the flexibility of the MS-A1004 with the power you need to really get your bass thumping.

JBL MS-WBC

The optional JBL MS-WBC wireless bass control will give you complete control of your bass without the hassle and expense of running wires.



Related Jbl Car Amplifier Products

No products found.

by

No products found.

by

JBL 4 CHANNEL AMPLIFIER

JBL 4 CHANNEL AMPLIFIER

MA6004
JBL 4-Channel Amplifier

  • Fully marinized circuit boards to keep salt and corrosion away from the critical circuit path
  • Onboard 12dB electronic crossovers to provide tuning options for systems of any size
  • Variable bass-boost circuit provides additional bass tuning to optimize performance, regardless of location
  • Low-profile heatsink allows for installation in tight spaces
  • Large-gauge barrier strips allow easy hookup and use of larger-gauge premium power, ground and speaker cable
  • MA6004: 145 Watts at 2 ohms, 60W RMS x 4 channels at 4 ohms and less than or equal to 1% THD + N

 



Related Jbl Car Amplifier Products

No products found.

by

No products found.

by

JBL MS-8 MS Series Digital Processor Reviews

JBL MS-8 MS Series Digital Processor

  • Improves audio performance of virtually any car audio system, including frequency response, bass performance, clarity, detail and stereo imaging
  • Logic 7 surround processor creates a 5.1- or 7.1-channel surround experience from two-channel source material
  • DSP Time Correction calibrates arrival time in every listening location; Auto DSP equalization compensates for speakers and vehicle interior issues
  • Auto tune automatically adjusts all aspects of the system using included binaural headset microphone
  • Precise, user selectable crossover points and crossover slopes for up to eight separate outputs

JBL System Integration Digital



No products found.

by

No products found.

by

JBL DA4002 Decade Series 2Cchannel Automotive Car Power Amplifier

JBL DA4002 Decade Series 2Cchannel Automotive Car Power Amplifier

  • 40W x 2 Automotive Power Amplifier
  • Built-in Electronic Crossover
  • Selectable Bass Boost
  • Floating-Ground Factory-Head Unit Interface
  • Triple-Threat Protection Circuitry

40W x 2 Automotive Power Amplifier *
Built-in Electronic Crossover *
Selectable Bass Boost *
Floating-Ground Factory-Head Unit Interface *
Triple-Threat Protection Circuitry *
2-Ohm Stable *
Power Output, 4 Ohms: 40W x 2 *
Peak Power Output: 200W *
Total Harmonic Distortion: 0.10% *
Frequency Response: 10Hz-20kHz *
Signal-to-Noise Ratio: >90dB



More Jbl Car Amplifier Products

No products found.

by

No products found.

by

JBL GTO608C 6.5-Inch 2-Way Component System Reviews

JBL GTO608C 6.5-Inch 2-Way Component System

  • 6-1/2″ / 6-3/4″ two-way component system with woofer, tweeter, crossover and mounting system
  • Plus One woofer cone with rubber surround
  • One-inch mylar-titanium tweeter
  • Outboard crossover with tweeter-level control
  • 210 Watts peak power handling; 2 ohm impedance

JBL 6-1/2″ 2-Way Component SystemThe GTO608C features Plus One woofer cones, with more surface area than that found on competing models of the same size. It also has computer-optimized, voice-matched passive crossover to ensure optimum transition from the midwoofer to the midrange speaker and the tweeter; My-Ti (Mylar/titanium composite) tweeters for increased power handling, reduced distortion and increased efficiency; and the I-Mount tweeter-mounting system for easy and versatile installation.


The GTO tweeter is both strong and lightweight while being adjustable

The Plus One woofer cone increases
bass output and efficiency

The patented Starfish and I-Mount tweeter mount system optimizes sound quality and makes install into factory systems easy. Click to Enlarge.

Why JBL Sound?

For more than 60 years, JBL products have been bringing home the impact and excitement of the world’s best recording studios, movie theaters and concert venues. Now, JBL engineers are creating these world-class listening experiences in the car. Thanks to advanced technology developed in the professional arena, JBL mobile products simply sound better than the competition. High output, superb bass response, long life and smooth response are all things you can expect from any speaker that wears the JBL badge. So join enthusiasts who know audio, and don’t settle for anything but JBL in your vehicle. Bring the sound of the show on the road.

Listen Loud
The last thing you want to worry about is the quality of your speakers. We understand. All new JBL mobile products have to go through nearly 500 hours of environmental testing. We put them under temperatures fluctuating between -35° C and +90° C with up to 90 percent air humidity for more than 200 hours. We expose speakers to UV light for more than 150 hours to simulate a mounting location on a car’s rear deck. We even shake things up, as all of our new mobile audio products have to pass extensive vibration testing before we release them for production. We’ve made unparalleled efforts to ensure the best possible quality so that you can listen long and loud when you crank up a JBL speaker.

Edge-Driven, Mylar-Titanium Tweeter
The JBL GTO608C component system uses a 1-inch (25-millimeter) Mylar-titanium (My-Ti) tweeter with a large voice coil–much like a voice coil found in high-end home audio speakers. The benefit of the Mylar and titanium blend in making a tweeter is that it is lightweight and has remarkable strength. At the same time, its large voice coil increases power handling and reduces distortion at high output levels. This tweeter design also helps create more seamless integration with the woofer. The GTO608C’s tweeter is even adjustable, so you can modify it to optimize the sound. The result? True, high-end, audiophile-quality performance.


The in-line crossover network creates seamless sound with the woofer Click to Enlarge.

Look for the True 4 ohm logo for the best real world performance

Intermount III makes installation into any factory location simple
Click to Enlarge

Computer-Optimized Outboard Crossover
When you want the best sound possible in your vehicle, only a JBL system will do. Like a high-end JBL home speaker, the JBL GTO608C component system employs a high-quality, computer-optimized outboard crossover that accurately and smoothly projects sound where it needs to go. Think of the crossover as a traffic cop for directing sound. When your music reaches your GTO608C speaker system from your amplifier or head unit, the crossover directs high frequencies to the tweeter and the midrange, and low frequencies to the woofer. Since we have engineered the crossover specifically for the high performance of the GTO608C component system, it provides incredible detail, smooth midrange and increased power handling. The result is an extraordinary listening experience that you would never expect to hear in the front seat of a car.

Bass that Booms

Plus One Cone
The JBL GTO608C component system uses a 6-1/2-inch (160-millimeter) woofer with the patent-pending JBL Plus One cone technology. Plus One technology gives the GTO608C more cone surface than competing models of the same size–up to 30 percent more in many cases. With a larger cone area, the GTO608C speakers provide higher efficiency and better bass response. Add a low-Q woofer design for higher bass output from the typical mounting location and 210-watt peak power handling, and the GTO608C will really get your car booming.

Powerful Performance

True 4-Ohm Topology
Low-impedance speaker voice coils extract more power from your amp for more powerful performance than high-impedance coils do. JBL GTO608C component-system speakers use a lower-impedance voice coil than a typical 4-ohm speaker to extract the most power possible from all amplifiers engineered to drive loads of 4 ohms or less. And the GTO608C component system is compatible with both aftermarket head units and factory-installed systems. Since many factory-installed systems incorporate 2-ohm speakers and include amplifiers designed to drive 2-ohm loads, replacing those reduced-impedance speakers with a typical 4-ohm model will reduce the power output from the amplifier. For the most powerful performance, the GTO608C component system makes the best use of any amplifier by providing an optimum 2-ohm load.

An Easy Install

I-Mount Tweeter-Mounting System
If you are upgrading the sound in your vehicle to the GTO608C component system, JBL’s proprietary I-Mount (patent no. 5,859,917) tweeter system makes it easy to flush-mount or surface-mount the tweeter. But being easy to mount isn’t enough. A tweeter has to sound good as well. If you flush-mount the GTO608C, you can use our innovative flush-mount cup to angle the tweeters and lock them into the best angle for optimum response and imaging.

Starfish Tweeter-Mounting System
What about when you want to replace the factory-installed component system that comes in many of today’s vehicles while keeping that “factory-built” look? JBL engineering has made that easy, too. The GTO608C features JBL’s Starfish tweeter-mounting system. It simplifies mounting the tweeter in any number of ways behind factory grilles and panels, and it doesn’t require any special modifications.

Intermount III (Patent Number 6,505,705) Mounting System
Doing it yourself? Installing GTO608C speakers in nearly any factory-built location is a breeze. Designed as replacements for factory-installed OEM speakers, they easily install into nearly any factory-built 6-1/2-inch location without requiring any special tools or modifications. To make installation even easier, the GTO608Cs use JBL’s patented Intermount III mounting system. Depending on the vehicle, the factory-built 6-1/2-inch location can actually vary in size from 6 inches all the way up to 6-3/4 inches, thanks to the GTO608C’s included installation rings. Even if you are upgrading an older set of aftermarket speakers, the GTO608C makes replacing them easy.

And with such easy installation, you’ll be listening to your new JBL speakers in no time at all.

The JBL GTO608c component system delivers high output, superb bass response, long life and smooth response.

Highlights

  • Great JBL Sound Quality
  • My-Ti delivers smooth highs and great imaging
  • Plus One woofer cones for the high output and deep bass
  • Computer optimized outboard crossover means audiophile sound quality
  • True 4-Ohm design pulls the most power out of your system
  • Easy to install

What’s in the Box
One pair of JBL GTO608C component speakers, one set of in-line crossover networks, one set of tweeters, installation hardware



More Jbl Car Amplifier Products

No products found.

by

No products found.

by

Car Audio Tags: