Amplifier

Boss Audio R1100M Mosfet Monoblock Power Amplifier with Remote Subwoofer Level Control

Boss Audio R1100M Mosfet Monoblock Power Amplifier with Remote Subwoofer Level Control

  • MOSFET Monoblock Power Amplifier
  • Remote Subwoofer Level Control Included
  • Blue Illuminated BOSS Logo
  • Max Power @ 2 Ohms: 1100 Watts
  • RMS Power @ 4 Ohms: 250 Watts



BOSS AUDIO MGR350B Marine Gauge MECH-LESS Receiver, with Audio Streaming
by Boss Audio Systems, Inc. BOSS AUDIO MGR350B Marine Gauge MECH-LESS  Receiver, with Audio Streaming(8) Buy new: CDN$ 110.96 CDN$ 106.35 13 used & new from CDN$ 106.35
Pyle PLMRCW2, White Water Resistant Radio Shield
by Sound Around Pyle PLMRCW2, White Water Resistant Radio Shield(7) Buy new: CDN$ 28.56 11 used & new from CDN$ 19.46
by

No products found.

by

Mcc204 – Mcintosh 4/3/2 Ch 200 Watt Power Amplifier Reviews

Mcc204 – Mcintosh 4/3/2 Ch 200 Watt Power Amplifier

  • 50 watts x 4, 20-20kHz, 4 ohms, 0.005%THD
  • MOSFET Pulse Width Modulated Power Supply
  • Configurable to 4, 3, or 2 Channels
  • Fully Discrete Design
  • High Current Output (2 Ohm Stable)

Brand New, unopened in Original Packaging. Ships Same Day, Full 1 year Warranty.



No products found.

by

No products found.

by

KAR 400.4 – ARC Audio 4 Channel 400 Watt Amplifier Reviews

KAR 400.4 – ARC Audio 4 Channel 400 Watt Amplifier

  • 50 watts x 4 @ 4 ohms
  • 100 watts x 4 @ 2 ohms
  • 190 watts x 2 @ 4 ohms bridged
  • Transient distortion: less than 0.05% @ 4 or 2 ohms
  • Frequency response: 20 Hz-20 KHz

The ARC Audio KAR 400.4 is a Class AB, 4-channel amplifier housed in a sleek, clear anodized aluminum chassis. The understated style looks classy and refined. The front two channels include a 12 dB-per-octave, fully-variable crossover from 55 Hz to 550 Hz. The front channels also include a 45 Hz bass boost that allows up to 18 dB of maximum boost. The rear channels include a 12 dB-per-octave, fully-variable crossover from 55 Hz to 5500 Hz via a “x10” frequency multiplier. The RCA connections and signal adjustments are located on one side of the ARC Audio KAR 400.4, while the power and speaker connections, along with the 40 amp fuse, are located on the other side. The gold-plated power and speaker screw terminal connections can easily accept either bare wire or fork terminals.

This amplifier performs as well as it looks. On the test bench, the ARC Audio KAR 400.4 delivered 70.2 watts x 4 into 4-ohms. Into 2-ohms, the KAR 400.4 delivered 107.5 watts per channel into four channels. This KAR 400.4 exceeded its rated power around 40 percent – very impressive. Into 4-ohms bridged, the KAR 400.4 delivered a respectable 248.5 watts per channel into two channels for a total amplifier power of 497 watts. At peak power, the ARC Audio KAR 400.4 average slightly above 70 percent, efficiency drawing 27.8 amps at 4 ohms stereo and 47.7amps at 4 ohms bridged.

The ARC Audio KAR 400.4 is a solid performer. This amplifier has enough power and is flexible enough to drive your complete system. Or, you could use it as the beginning to a high-power, high end system of sonic goodness. If you’re looking for a great sounding amplifier with the ability to grow, the ARC Audio 400.4 would be an excellent choice



More Mcintosh Car Speaker Products

No products found.

by

No products found.

by

SAZ-2500D – Sundown Audio 2500W 1-Channel Monoblock Amplifier

SAZ-2500D – Sundown Audio 2500W 1-Channel Monoblock Amplifier

  • 2500W Digital Class-D Linkable Mono Block Amplifier
  • Daisy-Chain Through Output RCA
  • 1 Ohm Stability
  • Efficiency : 86% @ 4 ohm, at 100Hz
  • 24dB/Oct Variable Crossover

The SAZ-2500D replaces the SAZ-2000D in our line-up. It packs 25% more power into a casing only 3/4″ longer than the older SAZ-2000D model. The 2500D features an output section equal to our highly regarded SAZ-3000D model and an extremely robust power supply section to back it up!

All of the latest technology and R&D available to us was implemented in the 2500D — years of experience in the SPL lanes and in customer vehicles has all been taken into account. We feel that the 2500D is a very worthy addition to our line up for both hardcore SPL competitors and enthusiasts alike.

* Digital Class-D Linkable Mono Block Amplifier
* Double Sided Through Hole Epoxy PCB
* 1 Ohm Stability
* Daisy-Chain Through Output RCA
* Efficiency : 86% @ 4 ohm, at 100Hz
* 24dB/Oct Variable Crossover
* Multi-Way Protection Circuitry
* (Thermal/Over Current/Speaker Short/Speaker DC Protection)
* RCA Line Input and Master Output
* 24dB Octave Crossover Slope
* 24dB Octave Variable Subsonic Crossover Slope
* Variable Bass Boost
* Variable Low Pass Filter
* Variable Phase Shift
* Zero(0) Gauge Power Supply Connectors
* Tested Voltage & THD : 14.4V & Less than 1% THD
* Operating Voltage : DC 10V~18V
* Wired Remote Controller

Rated power output

RMS power, 2 ohm linkable/dual mono
5000W x 1CH

RMS power, 1 ohm mono
2500W x 1CH
RMS power, 2 ohm mono 1200W x 1CH

RMS power, 4 ohm mono
600W x 1CH
Signal to Noise Ratio >90dB
Low pass frequency crossover 35Hz~300Hz
Subsonic filter 10Hz~60Hz
Bass boost @ 45Hz 0~6dB
Phase shift control 0~180 degree
Frequency response 10Hz~350Hz (+/- 1dB)
T.H.D @ 4 ohm <0.1% Efficiency @ 4 ohm 86% Fuse rating 250A (external type fuse) Input Sensitivity 200mV to 6V (+/- 5%) Dimensions 252(W) x 58(H) x 512(L)mm



SAX-125.2 – Sundown Audio 125W 2-Channel Amplifier

  • 2/1 Channel Bridgeable Class-AB Amplifier
  • MOSFET PWM Power Supply
  • Stable Into 4 Ohms Bridged or 2 Ohms Stereo Load
  • 12dB Octave Electronic Crossover Slope
  • High Pass Filter Variable with x 10 Range Selectable Switch

The SAX-125.2 was designed to replace our SAX-100.2 model — it features an upgraded power supply for a bit more power as well as greatly enhanced crossover flexibility.

This unit was built to satisfy the discerning audiophile who doesn’t necessarily want to spend huge sums of money on his full range amplifier. This amplifier utilizes high quality Sanken bipolar output transistors, and 12 of them at that! The SAX-125.2 is also equally suited for subwoofer applications where tremendous power is not called for.

* 2/1 Channel Bridgeable Class-AB Amplifier
* MOSFET PWM Power Supply
* Stable Into 4 Ohms Bridged or 2 Ohms Stereo Load
* 12dB Octave Electronic Crossover Slope
* Variable Subsonic Filter
* High Pass Filter Variable with x 10 Range Selectable Switch
* Low Pass Filter Variable with x 10 Range Selectable Switch
* HPF/FULL/LPF Selectable Switch
* Variable Bass Boost Control
* Variable Bass-Boost Frequency Control
* Variable Input Level Control
* Input Sensitivity : 200mV ~ 6V
* Subsonic Filter : 10Hz ~ 500Hz
* Signal Input and Line Out RCA Connectors
* Multi-Way Protection circuitry (Thermal/Over Current/Speaker Short/Speaker DC protection)
* Tested Voltage & THD: 14.4V & Less than 0.05% THD
* Operating Voltage : DC10V~16V Power Input
* Wired Remote Controller

RMS power, 4 ohm stereo
125W x 2CH

RMS power, 2 ohm stereo
200W x 2CH

RMS power, 4 ohm bridged
400W x 1CH
Signal to Noise Ratio >90dB
Low pass frequency crossover 50Hz ~ 5KHz
High Pass Crossover 30Hz ~ 3KHz
Variable Subsonic Filter 10Hz to 500Hz
Bass Boost 0~18dB
Variable Bass-Boost Frequency Control 35Hz to 120Hz
Frequency Response 10Hz ~ 40KHz (+/-1dB)
THD@RMS Watts <0.1% Channel Separation 75dB Fuse Rating 20A x 3 Input Sensitivity Variable 200mV~6V (+/- 5%) Dimensions 252(W) x 58(H) x 340(L)mm



No products found.

by

No products found.

by

SAZ-1000D – Sundown Audio 1000W 1-Channel Monoblock Amplifier

SAZ-1000D – Sundown Audio 1000W 1-Channel Monoblock Amplifier

  • 1000W Digital Class-D Linkable Mono Block Amplifier
  • Double Sided Through Hole Epoxy PCB
  • 1 Ohm Stability
  • Efficiency : 86% @ 4 ohm, at 100Hz
  • Multi-Way Protection Circuitry (Thermal/Over Current/Speaker Short/Speaker DC Protection)

The SAZ-1000D is our most compact Class-D amplifier and can fit almost anywhere! Don’t let the small size fool you as this amplifier packs 1000-watts RMS into a tiny package only 11.5 inches long.

* Digital Class-D Linkable Mono Block Amplifier
* Double Sided Through Hole Epoxy PCB
* 1 Ohm Stability
* Efficiency : 86% @ 4 ohm, at 100Hz
* 24dB/Oct Variable Crossover
* Multi-Way Protection Circuitry (Thermal/Over Current/Speaker Short/Speaker DC Protection)
* RCA Line Input and Master Output
* 24dB Octave Crossover Slope
* Variable Subsonic Filter
* Variable Bass Boost
* Variable Low Pass Filter
* Variable Phase Shift
* Four(4) Gauge Power Supply Connectors
* Tested Voltage & THD : 14.4V & Less than 1% THD
* Operating Voltage : DC 10V~16V
* Wired Remote Controller

RMS power, 2 ohm linkable/dual mono
1800W x 1CH

RMS power, 1 ohm mono
1000W x 1CH

RMS power, 2 ohm mono
600W x 1CH

RMS power, 4 ohm mono
300W x 1CH
Signal to Noise Ratio >90dB
Low pass frequency crossover 35Hz~300Hz
Subsonic filter 10Hz~60Hz
Bass boost @ 45Hz 0~18dB
Phase shift control 0~180 degree
Frequency response 10Hz~350Hz (+/- 1dB)
T.H.D @ 4 ohm <0.1% Efficiency @ 4 ohm 86% Fuse rating 25A x 3 Input Sensitivity 200mV to 6V (+/- 5%) Dimensions 252(W) x 58(H) x 294(L)mm



No products found.

by

No products found.

by

Mcc302 – Mcintosh 2 Ch 600 Watt Power Amplifier

Mcc302 – Mcintosh 2 Ch 600 Watt Power Amplifier

  • 150 watts x 2, 4 ohms, 0.005%THD
  • Bridgeable to 600 Watts
  • High Current Output – 30 Amperes
  • Fully Complimentary Double Balanced Design
  • Balanced Inputs w/Pass Through

McIntosh MCC302 McIntosh 2 Ch 600 Watt Power Amplifier 150 watts x 2, 4 ohms, 0.005%THD Bridgeable to 600 Watts High Current Output – 30 Amperes Fully Complimentary Double Balanced Design Balanced Inputs w/Pass Through Equalizer (1-Band) and Variable Crossover Filters Gold Plated Terminals



No products found.

by

No products found.

by

Rockford Fosgate RFK4D 4 AWG Dual Amplifier Install Kit Reviews

Rockford Fosgate RFK4D 4 AWG Dual Amplifier Install Kit

  • Rockford Fosgate Power Kits feature full AWG (American Wire Gauge)
  • 100% oxygen free copper
  • All brass parts are manufactured using the highest quality of standards
  • All kits include the appropriate wire termination hardware

Rockford Fosgate Connecting Punch 4 AWG Dual Amplifier Complete Install Kit. 17 feet of 4 AWG power wire, 6 feet of 8 AWG power wire, 3 feet of 4 AWG ground wire, 6 feet of 8 AWG ground wire, 30 feet of 16 AWG speaker wire, (2) 20 feet twisted pair RCA cables, 4 AWG distribution block, 20 feet of remote wire, Maxi fuse holder, 60 Amp fuse included. Power kits feature full AWG (American Wire Gauge), 100% oxygen free copper. All brass parts are manufactured using the highest quality standards. This ensures that your accessories deliver total performance. All kits include the appropriate wire termination hardware. Visit www.RockfordFosgate.com 24 hours a day for technical support or call (800)669-9899 M-F 7 am to 5 pm MST.



No products found.

by

No products found.

by

Rockford Fosgate Rfk4x 4 Gauge Amplifier Install Kit Made of 100% Pure Crystal-oxygen Free Copper

Rockford Fosgate Rfk4x 4 Gauge Amplifier Install Kit Made of 100% Pure Crystal-oxygen Free Copper

  • 100% Pure Crystal-Oxygen Free Copper (PC-OFC)
  • 16AWG Speaker Wire (1.31mm²) 65 strands
  • 4AWG Power Wire (21.1mm²) 1,862 strands
  • FULL spec cable – meets or exceeds AWG (American Wire Gauge) requirements
  • Includes appropriate wire termination hardware

Brand new Rockford Fosgate RFK4X 4 Gauge amplifier install kit made of 100% pure crystal-oxygen free copper
Features:

100% Pure Crystal-Oxygen Free Copper (PC-OFC)
16AWG Speaker Wire (1.31mm²) 65 strands
4AWG Power Wire (21.1mm²) 1,862 strands
FULL spec cable – meets or exceeds AWG (American Wire Gauge) requirements
Includes appropriate wire termination hardware



More Rockford Fosgate Car Amplifier Products

No products found.

by

No products found.

by

Di475.1 – Soundstream 475 Watt Monoblock Class D Amplifier Reviews

Di475.1 – Soundstream 475 Watt Monoblock Class D Amplifier

  • RMS Power Output : 475 Watts
  • Number Of Channels: 1
  • Wired Bass Remote: Included
  • Low Frequency response: 40 Hz
  • High Frequency Response: 250 Hz

# Built In Crossovers: Yes
# PWM Power Supply
# 3 Stage Protection Circuit
# SMD Technology
# MIL-Spec Fiberglass Circuit Board
# True Digital Switching
# High Rail Voltage
# 2 Ohm Stable
# Compact Chassis
# Full MOSFET Circuitry
# High Level Input
# Line Output
# Bass Boost @ 45Hz +6dB or +12dB
# 18dB Crossover Centered at 80Hz
# THD < 0.5% # Dimensions are 12 x 2.3 x 9



Related Soundstream Car Stereo Products

No products found.

by

No products found.

by

Rockford Fosgate Amplifier Power Installation Kit RFK8 Reviews

Rockford Fosgate Amplifier Power Installation Kit RFK8

  • 8 Gauge Amplifier Power Installation Kit, Premium power and ground wire provides optimal power transfer
  • Designed specifically for car audio systems up to 400 watts
  • Made from 100% oxygen-free copper for a pure uninterrupted transfer of power
  • AGU Fuse holder offers ideal protection for high powered systems
  • True-to-Gauge cables/wires meet or exceed the industry standard of copper required for the gauge size

The kit includes 17 feet of 8 AWG power wire, 3 feet of 8 AWG ground wire, AGU fuse holder and fuse, 20 feet of remote wire, and 40 Amp fuse.



Find More Rockford Fosgate Car Amplifier Products

No products found.

by

No products found.

by

Car Audio Tags: