Component

Polk Audio AA5252-A MM5251 5.25-Inch System Component System

Polk Audio AA5252-A MM5251 5.25-Inch System Component System

  • Neodymium Magnets a rare earth metal offering exceptional strength to performance ratio, found only in the most exotic speakers, saves tremendous weight. Don’t let the sound system weigh your vehicle down.
  • Carbon Composite Basket based on the spokes of a wheel is lightweight, will not flex during peaks and looks great! Don’t be afraid to show off the back of your woofer.
  • Klippel Optimized Components using a state-of-the-art Klippel Distortion Analyzer, Polk engineers were able to optimize the woofer’s motor structure, voice coil alignment and suspension for the best possible performance, even at extreme listening levels.
  • Woven Glass Composite Cones feature tremendous stiffness-tomass ratio. Lower mass means faster transients and finer detail.
  • Large-Diameter Voice Coils (30mm) in drivers increase reliability and power handling capacity.

Introducing the new Mobile Monitor (MM) Series high performance loudspeaker systems, the next generation in mobile loudspeaker design. The MM Series features 18 new models, including 3 Ultra Marine designs, to fit virtually any application on land and water. The MM Series is composed of 6 full range systems, 3 component packages and 9 subwoofers. As a result of 3 years of Polk research and development, the new MM systems have been designed to offer unparalleled sound quality with exceptional fit to meet virtually any application. Borrowing technology from our flagship SR Series, the MM Series offers exceptional value for the price. Through the use of high-tech carbon composite baskets, powerful Neodymium motor structures using oversized voice coils, and state-of-the-art woven glass composite cones, we offer high-end audio performance normally found only in the most expensive loudspeaker systems. In addition, these space age materials offer weight savings that can mean higher performance for your car or boat.



Related Polk Audio Car Speakers Products

Portable AM/FM Radio in Teal
by Studebaker Portable AM/FM Radio in Teal(1) Buy new: CDN$ 28.89 3 used & new from CDN$ 28.89
by

No products found.

by

Rockford Fosgate M2 M282 Marine-Grade 8-Inch Coax Component Speakers (White)

Rockford Fosgate M2 M282 Marine-Grade 8-Inch Coax Component Speakers (White)

  • Eight-inch, 4-ohm marine coaxial with 200 watts maximum power handling (100 watts RMS)
  • Injection molded mineral filled polypropylene cone body with TPE surround
  • One-inch (25mm) bridge mounted component grade coated aluminum alloy tweeter
  • Corrosion, moisture, and UV resistant for true marine-grade compliance
  • 48Hz – 22kHz frequency response

Rockford Fosgate M2 Marine Grade, 8″ Coax/Component System CEA Certified Power 100 Watts RMS, 200 Watts Peak. Visit www.RockfordFosgate.com 24 hours a day for technical support or call (800)669-9899 M-F 7 am to 5 pm MST.The RF Marine M2 series full-range speakers are perfect for anyone looking to add some PUNCH to their vessel. M2 drivers are UV and moisture resistant to assure great performance in harsh marine environments. However you choose to spend your day on the water, you’ll own it with M2 Marine Grade. The eight-inch M282 full-range boasts 200 watts maximum power handling.

The Rockford Fosgate M2 Marine Series

Although the car environment is harsh, it’s downright cozy compared to what your boat has to deal with. Despite all the moisture, vibration and corrosion, it has to play loud–how else are those guys skiing behind you going to hear it? It takes serious engineering to make it sound good and last. The M2 series are true “marine grade” speakers for watercraft.



M282 Features

  • 1″ (25mm) bridge mounted component grade coated aluminum alloy tweeter
  • 100% UV stable Centrex injection molded plastic parts
  • 18 gauge corrosion resistant removable Stainless Steel grille cover insert
  • Corrosion resistant gold plated polarized input terminals
  • Injection molded mineral filled polypropylene cone body with UV inhibitors
  • Integrated 12dB/octave sealed crossover with integrated protection circuit
  • Linear, high excursion matched motor magnetics and suspension design
  • Moisture, tear and fatigue resistant aramid fiber spider
  • Removable trim ring
  • Spare terminal set for optional additional tweeters
  • True Marine Grade compliance
  • Ultra-flexible fully insulated silicone lead wire
  • UV and Salt-Fog resistant TPE (Thermo-Plastic Elastomer) surround

Full-range drivers for marine applications.
Click to enlarge.


M282 Specifications

Configuration: 8″ Coaxial
Size: Midrange: 8″
Tweeter: 1″
Impedance: 4-Ohms
Power Handling: 100 Watts RMS
200 Watts Max
Basket Material: UV Stable Centrex
Speaker Connector: Spade Lug
Frequency Response: 48Hz – 22kHz
Crossover: High-Pass (HP): 12dB
SPL (1w/1m): 90dB
Cutout Diameter: 7.09 in. (18cm)
Mounting Depth: 3.42″ (8.69 cm)
Mounting Hardware: Stainless Steel
Shipping Weight: 14.1 Lbs. (6.4 Kg.)

Thirty Years of Rockford Fosgate

Rockford Fosgate products have been designed and engineered in Tempe, Arizona since the beginning. Rockford’s 30 year reputation is grounded in engineering and manufacturing some of the finest audio products in the world. The company’s no-compromise approach has yielded patented iconic products such as the Punch EQ, Punch 45 amplifier and the 3Sixty integrated signal processor. Today, Rockford’s new products push the performance envelope even further. Each new product is a step forward–they sound bigger, they play louder, and run longer. Rockford never settles for “good enough.”

The 2010 product line represents the company’s core philosophy. Rockfords new amplifiers, speakers and subwoofers have raised the bar on the competition.


What’s in the Box

Rockford Fosgate M2 M282 Marine Grade Eight-Inch Coaxial Component Speakers (White), Mounting Hardware, Decorative Trim Ring, User’s Manual


M2 Marine Series Coaxials

Rockford Fosgate offers four different M2 full-range coaxial models–a 6.5-inch and an eight-inch, both available in white and black.

Rockford Fosgate M2 M262 Marine Grade 6.5-Inch Coaxial Component Speakers (White) Rockford Fosgate M2 M262B Marine Grade 6.5-Inch Coaxial Component Speakers (Black) Rockford Fosgate M2 M282 Marine Grade 8-Inch Coaxial Component Speakers (White) Rockford Fosgate M2 M282B Marine Grade 8-Inch Coaxial Component Speakers (Black)



No products found.

by

No products found.

by

Pyle PLG6C 6.5-Inch 400-Watt 2-Way Custom Component System

Pyle PLG6C 6.5-Inch 400-Watt 2-Way Custom Component System

  • 400-watt 2-way custom component system includes pair of woofers, tweeters, and crossovers
  • 6.5-inch woofers with yellow poly injection cones and butyl rubber surrounds
  • 0.5-inch silk dome tweeters with neodymium magnets and multiple mounting options
  • Pair of passive crossover networks with 12 dB/octave slope
  • 50 Hz to 22 kHz overall frequency response

1 pair 6 1/2″ mid bass speakers (200W rms/400W max)1-pair 1″ neodymium dome tweeters (50W RMS/100W max)1-pair of passive crossover worksSystem frequency response: 50Hz-24kHzIncludes grilles and mounting hardware

Part of Pyle’s Gear series, this component kit is designed to provide the best quality sound for the budget-minded. Includes one pair of 6.5-inch mid-bass speakers, one pair of 0.5-inch tweeters, one pair of passive crossover devices, a wiring kit, grills, and installation hardware–it’s a perfect way to upgrade and expand the range of your factory system.

Quality sound for the budget-minded. Click to enlarge.

Passive crossover network with 12 dB/octave slope.

Silk dome tweeters with neodymium magnets and multiple mounting options.

6.5-Inch Mid-Bass Speakers
These mid-bass speakers pump out 400 watts of power, and with standard 6.5-inch sizing, will fit in most OEM locations. A brilliant yellow poly injection cone provides great rigidity and resistance to harsh weather conditions. A non-fatiguing butyl rubber surround and high-temperature aluminum voice coil mean you’ll get years of performance without the wear and tear. The speakers are housed in electroplated steel baskets, and boast a 40-ounce magnet.

1/2-Inch Tweeters
The included 100-watt 0.5-inch tweeters have three mounting options and a frequency response from 1.3 to 22 kHz. The neodymium magnet and silk dome construction help enable clear, well-defined high-end. Choose from flush, surface, or angle mounting to optimize your vehicle’s mounting locations and get the best possible treble focus.

Passive Crossover Networks
Also included are a pair of passive crossover networks, with a 12 dB octave slope, to separate the signal from your head unit between the mid-bass and tweeter speakers for a richer, more accurate sound.

Easy Installation
A full wiring kit and all the installation hardware you’ll need to add this system to your vehicle are included, along with a wiring diagram.

About Pyle Audio
Pyle Audio’s legendary car audio products have acquired devoted fans worldwide. With the recent rapid developments in mobile video technology, Pyle has been on the forefront, making quality systems available at affordable prices. We have also expanded our product scope to include neon and LED lighting accessories, as well as vehicle security systems.

Historically, Pyle Audio has been strictly a car audio manufacturer. This is no longer the case, thanks to our increasingly popular and successful Pyle Pro division. In just a few short years, Pyle Pro has come to be recognized as THE source for professional audio equipment at reasonable prices. We have proven that professional products and exorbitant pricing are not necessarily synonymous.

PLG6C Specs

Mid-Bass
Size: 6.5 inches
Magnet: 40 ounces
Power handling: 200 watts RMS / 400 watts max.
Impedance: 4 ohm
Frequency response: 50 Hz to 5 KHz
Mounting depth: 2.65 inches
Tweeter
Size: 0.5 inches
Magnet: Neodymium
Power handling: 50 watts RMS / 100 watts peak
Frequency response: 1.3 to 22 KHz
Impedance: 4 ohm
Crossover Network
Type: Passive
Slope: 12 dB / Octave

What’s in the Box

Pair of 6.5-inch mid-bass speakers, pair of 0.5-inch tweeters, pair of passive crossovers, grills, wiring kit, installation hardware, and wiring diagram template.



No products found.

by

No products found.

by

Polk Audio DB5251 5.25-Inch 2-Way Component System (Single, Silver)

Polk Audio DB5251 5.25-Inch 2-Way Component System (Single, Silver)

  • A single unit 2-way component speaker system
  • Equipped with a 5.25-inch polymer/mica composite cone with rubber surround
  • Maximum input power: 250 watts
  • Equipped with one 1-inch liquid-cooled silk-polymer composite dome tweeter and a neodymium magnet
  • Supplied adaptor rings enable a flexible fit for both 6.5 and 6.75-inch applications

db5251 5.25 Inch 2-way Component System with External CrossoverThe Polk Audio db5251 5.25″ 2-Way Component System with External Crossover brings you superior looks and sound at a price that makes high performance affordable to everyone. This system includes a 5.25″ polymer/mica composite mineral filled cone that is stiff yet lightweight, bringing you big sound with little distortion. A 25mm liquid-cooled silk-polymer composite dome tweeter with neodymium magnet creates clear, detailed highs. Its flush and surface mount swivel cups give you increased placement flexibility and soundstage optimization. The 2nd-order Butterworth Outboard Crossover provides fiddle-free high-quality sound. Additionally, the vented crossover housing gives you a choice of hidden wire channels for easier, more professional-looking installs. A multi-hole mounting pattern makes for easy drop-in installations in practically any car on the road. Polk db Series speakers are built tough to withstand the harshest environments, so they are perfect for use in boats of all types. The db Series delivers classic Polk Audio performance and durability like never before.



No products found.

by

No products found.

by

Planet Audio BB625C 6-1/2-Inch 2-Way Component Speaker System Reviews

Planet Audio BB625C 6-1/2-Inch 2-Way Component Speaker System

  • Power Handling (Peak) 200W , Power Handling (Continuous) 100W , Frequency Response 35Hz-20Khz , Crossover Slope @ 4.5Khz 18Db/Octave , Efficiency (1 Watt/1 Meter) 91 Db , Impedance 4 Ohm .
  • Silver Glass-Fiber Woofer Cone  Patented Crs (Cloth Reinforced Santoprene) Surround
  • “Open Design-Inch Stamped Basket  1-Inch Black Anodized Aluminum Voice Coil Former
  • 1-Inch Silk Soft Dome Tweeters With Neodymium Magnets 18Db Passive Crossover Custom Tooled Grilles
  • 6.5-Inch 2-Way Component Speaker System

6-1/2-Inch 2-Way Component Speaker System



Soundstream STL1.1200D 1200-Watt Mono Block Power Amplifier (Blue)

  • 1200W RMS Mono Block D Class Stealth Power Amplifier
  • Stackable Chassis for Multiple Amplifier Applications
  • Black Anodized Finish w/ Chrome Accents
  • Double Sided PCB w/ SMD Components
  • Aluminum Alloy Heat-sink

MONO BLOCK PWR AMP 1200W



Related Planet Audio Car Amplifier Products

No products found.

by

No products found.

by

Kicker 11ds652 6.5 Component System W/20mm Twt Reviews

Kicker 11ds652 6.5 Component System W/20mm Twt

  • 6.5 inch Car audio Component Speakers
  • RMS Power Handling: 120 watts per set / 60 watts each | PEAK Power Handling: 240 watts per set / 120 watts each
  • Frequency response: 35-21 Khz
  • 4000 Hz 12dB crossover
  • Tweeter Mounting Depth: 1-9/16″, 40mm

KICKER 6.5″ COMPONENT SYSTEM W/20MM TWT (Inv Code: W04)



No products found.

by

No products found.

by

Infinity 609CS 270W (Peak) 6-1/2 x 6-3/4 Two-Way Component System Speakers (Pair)

Infinity 609CS 270W (Peak) 6-1/2 x 6-3/4 Two-Way Component System Speakers (Pair)

  • The Kappa 60.9cs component speaker system features 6-1/2-Inch woofers with responsive woven glass-fiber
  • Plus One (patent pending) woven-glass-fiber woofer cone Edge-driven MMD-dome tweeter Outboard passive crossover with air core inductors
  • Tweeters handle down to 2,500 Hz
  • Low-frequency output
  • The Plus One design
  • 6-1/2-Inch woofers with responsive woven glass-fiber
  • Longer voice coils add some punch to the bass

The Kappa 60.9cs component speaker system features 6-1/2″” woofers with responsive woven glass-fiber cones that won’t flex during a hard workout. The Plus One design offers a larger surface area for improved low-frequency output and efficiency, while longer voice coils add a little more punch to the bass. Large magnets keep the woofers running cooler by placing more steel close to the voice coils to act as a heat sink.



Infinity uses the same textile dome tweeters found in many of their popular home speakers with this Kappa system, so you’ll hear the music the way it was recorded with minimal coloration or distortion. The tweeters handle down to 2,500 Hz, almost an octave below the tweeters in many systems, so you’ll hear more definition and detail, no matter where you sit. Infinity includes mounting hardware to install the tweeters in custom or factory openings.



The computer-optimized outboard crossover networks employ audiophile-grade components to separate highs and lows, so that the woofer and tweeter work together perfectly. You can attenuate tweeter response by 6 dB to get the perfect sonic balance if you’ve mounted the tweeters in a less-than-ideal factory location.



Pre-wired crossovers eliminate a time-consuming step in your installation, and terminals at the end of the crossover wires screw directly to the Kappa woofers and tweeters, leaving no chance for incorrect wiring.



Related Infinity Car Speaker Products

No products found.

by

No products found.

by

Polk Audio DB6501 6.5-Inch 2-Way Component System (Pair, Silver)

Polk Audio DB6501 6.5-Inch 2-Way Component System (Pair, Silver)

  • 6.5-inch component system with pair each of woofers, tweeters, crossovers
  • Woofers feature polymer/mica composite cone with butyl rubber surround, Kapton voice coil former
  • 25mm liquid-cooled silk/polymer composite dome tweeters with neodymium magnet for clear, detailed highs
  • Two-way Butterworth outboard crossover with vented housing, electronic tweeter protection circuit
  • Adaptor Rings make it easy to fit the db6501 in 6-1/2 inch and 6-3/4 inch applications

Polk’s new 2007 db Series is better than ever with superior looks and even better sound–at prices that make high performance affordable to everyone. The db6501 is a 6.5-inch two-way component system that works well in OEM factory systems, as well as with high-powered aftermarket head units and component power amps.Polk’s new 2007 db Series is better than ever with superior looks and even better sound–at prices that make high performance affordable to everyone. The db6501 is a 6.5-inch two-way component system that works well in OEM factory systems, as well as with high-powered aftermarket head units and component power amps.

High performance that’s affordable to everyone. Click to enlarge.

The butyl rubber surround won’t fall apart under the stress of extreme temperatures, sunlight or time.

A vented crossover housing gives you a choice of hidden wire channels for easier, more professional-looking installs.

Marine Certified
Polk db Series speakers are built tough to withstand the toughest environments so they are perfect for use in boats of all types. That’s why Correct Craft offers Polk Audio speakers in their award-winning Nautiques ski and wakeboarding boats.

Tweeters
The 25mm liquid-cooled silk/polymer composite dome tweeter with neodymium magnet provide clear, detailed highs.

Flush and surface mount swivel cups allow placement flexibility for soundstage optimization in your vehicle.

Mid/Woofers
The 6.5-inch woofers feature a dynamic balance polymer/mica composite mineral-filled cone, which is stiff yet lightweight, for big sound with little distortion. The butyl rubber surround won’t fall apart under the stress of extreme temperatures, sunlight or time, for years of the great Polk sound.

The woofer’s low-mass, two-layer 25mm Kapton voice coil former ensures high power handling and great reliability. Although Katpon handles plenty of heat, a pole plate heat sink promotes better heat dissipation.

A flat spider provides faster, longer excursion linear motion, and the flexible woven leads are sewn directly into Spider for greater reliability.

Finally, the backbone–a rock solid, acoustically inert stamped steel basket finished in rustproof Gun Metal Gray.

Installation
The supplied adaptor rings enable the db6501 to fit both 6-1/2-inch and 6-3/4-inch applications, ensuring an easy fit in everything from domestics to imports including VWs and Audis, BMWs and other European imports.

The tough-looking ABS Grilles are computer optimized and based on exclusive MOMO designs, and stainless steel mounting hardware is included.

Crossover
The 2nd-order Butterworth outboard crossover helps get you component system sound at a coaxial price. Electronic tweeter protection keeps your tweeters from accidental abuse for reliable, high-output sound, and the vented crossover housing gives you a choice of hidden wire channels for easier, more professional-looking installs.

System Specs

  • Overall Frequency Response: 35Hz-23kHz
  • Nominal Impedance: 4 Ohms
  • Power Handling (continuous): 100 Watts
  • Power Handling (peak): 300 Watts
  • Efficiency: 92 dB

One-Year Warranty
This system is covered by Polk Audio’s one year parts & labor warranty.

What’s in the Box
Woofers (pair), Tweeters (pair), Crossovers (pair), Mounting Hardware, Speaker Cable, User’s Manual



No products found.

by

No products found.

by

Infinity Reference 5030cs 5.25-Inch, 225-Watt High Performance Two-Way Component System (Pair) Reviews

Infinity Reference 5030cs 5.25-Inch, 225-Watt High Performance Two-Way Component System (Pair)

  • 5-1/4-inch two-way component system with 225 Watts peak power handling and 2 Ohm impedance
  • Plus One woofer cones and durable rubber surrounds for increased bass output and higher efficiency
  • Edge-driven textile dome tweeters for increased power handling and reduced distortion at high output levels
  • Laboratory-optimized passive crossover networks with tweeter level adjustment
  • One-year warranty

Looking for a more moving audio experience? Take Infinity car audio for a ride. Innovative materials and breakthrough engineering have always put Infinity products out in front of the competition’s. So expect extreme output from these speakers, but be prepared for accuracy and detail that may surprise you. Infinity Reference Series loudspeakers continue to be the top-selling premium speakers in the world. For instance, the 6-1/2-inch Reference coaxial model has been the number-one-selling car audio multielement speaker for five years straight. With proprietary features such as patent-pending Plus One cones, true 4-ohm topology, UniPivot edge-driven tweeters and the industry-leading Intermount III and I-Mount mounting systems, as well as the Starfish tweeter-mounting adapter, Reference Series speakers leave the competition scrambling to keep up.Infinity’s 5030cs is a 5-1/4-inch, two-way component system including Plus One woofer and 1-inch textile dome tweeter with I-mount tweeter kit and Starfish OEM adapter.

The Infinity Reference Series

Infinity’s Reference Series has been engineered to deliver best-in-class performance for those looking to replace or upgrade their factory speakers. Features like Infinity’s Plus One (patent pending) woofer cones and edge-driven-dome tweeters have helped position Infinity Reference as the number-one line of automotive loudspeakers for the past six years straight.



Component Systems are the perfect platform when developing a system with superior imaging and staging.

Infinity 5030cs Features

Plus One woofer cones
This patent pending technology deliver a cone with more surface area than competing models of the same size. The result is increased bass output and higher efficiency.

Rubber surrounds
This woofer surround material provides optimum cone-edge suspension and absorbs distortions that may travel up the cone edge, adding stronger low-end.

True Four Ohms
All Reference speakers feature two ohm voice coils. Original factory-installed speaker wiring in many cars is 18-22 gauge. This wire, and heating in the voice coil when power is applied, increase the impedance “seen” by the amplifier or head unit. The impedance of Reference Speakers has been adjusted to compensate for this increase and can be safely driven by any head unit.

Edge-driven textile dome tweeter
These are not commonly used w-domes, but fully-edge-driven domes like those found in better home audio speakers. The benefit is increased power handling and reduced distortion at high output levels. This technology also allows for better integration with the mid/woofer.

Crossover network with tweeter adjustment
Each Infinity Reference component system includes a pair of laboratory optimized passive crossover networks that include tweeter adjustment. If the tweeters are located low in the doors or if you are looking for a brighter sound, you can set the tweeter at +3dB.

Versatile Mounting
To facilitate proper installation and location of the tweeter, each Reference component system includes Infinity’s patented I-Mount (patent no. 5,859,917) tweeter mounting kit including the Starfish OEM adapter.


Infinity 5030cs Specifications

Power Handling, RMS: 75 Watts
Power Handling, Peak: 225 Watts
Sensitivity (2.83V @ 1m): 92dB
Frequency Response: 67Hz – 21kHz
Impedance: 2 Ohms
Mounting Depth: 2-1/4 inches



About Infinity

Infinity was founded in 1968 on a unique blend of technology, performance, and design. Today, Infinity offers three tiers of automotive speakers comparable to the best home-audio components. Infinity Kappa Perfect, Kappa, and Reference Series speakers deliver performance that rivals the best the competition has to offer.


What’s in the Box

Two Woofers, Two Tweeters, Two Crossovers, Two Grilles, Mounting Hardware, User Manual


Infinity Reference Series Component Systems

Component Systems are the perfect platform when developing a system with superior imaging and staging. These systems consist of a separate tweeter, crossover, and midrange/woofer. Infinity offers three levels of component systems. Each offers “best in class” performance and delivers incredible sonic detail and realism.

Infinity Reference 5030cs 5.25-Inch 225-Watt Two-Way Component System Infinity Reference 6030cs 6.25-Inch 270-Watt Two-Way Component System Infinity Reference 6830cs 6 x 8/5 x 7-Inch 270-Watt Two-Way Component System



MB Quart Marine NAU660 360-Watt A/B-Class 6-Channel Amplifier

  • MOSFET marine amplifier Micro Class A/B amplifier topology delivers 6 x 60 Watts @ 4 Ohms, 6 x 90 Watts @ 2 Ohms, 3 x 180 Watts @ 4 Ohms
  • Designed to conform to ABYC marine electronic standards with gold-plated power, ground, speaker and RCA corrosion resistant connections
  • High-end features such as fully adjustable crossovers including High Pass, Low Pass, Full Pass, Bass EQ and built-in diagnostics with visual indicators
  • UV and salt water resistant paint, silk screen and heat sink enclosure; marine-grade conformal coated circuit boards resist corrosion from salt spray and moisture
  • Features Line Outputs for daisy-chaining additional amps without the need for Y-cable adapters

6 x 60 W @ 4 Ohms, 6 x 90 W @ 2 Ohms, 3 x 180 W @ 4 Ohms. Founded in the early 60’s in Obrigheim, Germany, MB Quart is known worldwide for designing and manufacturing innovative and technically advanced audio products. From car, marine and home loudspeakers, amplifiers and subwoofers, MB Quart products exemplify “German Engineering.” The Nautic line of amplifiers use extreme speed processors resulting in overall low-distortion for stable reliable and excellent sound performance while conforming to marine electrical standards. MB Quart most recently revolutionized the mobile loudspeaker industry with WideSphere technology that emits extra-wide sound dispersion to listeners in order to enjoy the full range of music from almost any seating position in a vehicle. Audio and marine systems are put through stringent tests under the most extreme environmental conditions. Decades of refinement with meticulous attention to detail and tolerances in hand-built components have earned MB Quart a distinguished reputation for quality manufacturing, unmatched reliability and extraordinary performance. Praised by countless world-wide audio press awards and critical listeners around the world, MB Quart brings extraordinary engineering expertise, experience and design philosophy to a truly global Maxxsonics brand. Parent company, Maxxsonics USA, offers decades of combined experience and distinction with four brands MB QUART, Hifonics, Autotek and Crunch. We independently support and maintain these best-in-class brands to bring you some of the biggest, baddest and coolest products in the car, marine and home audio industry. Maxxsonics designers and engineers take great care and satisfaction in producing only the finest quality products to exceed your needs. Look for the stylized blue “M” on your product and packaging. It stands for quality, performance and power you can only get from Maxxsonics.

MB Quart’s Nautic line of amplifiers use extreme speed processors, resulting in overall low distortion, for stable, reliable, and audible sound performance while conforming to marine electrical standards. The NAU660 delivers 1200 watts maximum power, and can be set up for 6/5/4/3-channel applications.

MB Quart NAU660

With pure A/B class amplifier topology, Nautic series amps deliver low-distortion, stable performance. Click here for a larger image

MB Quart NAU660

View a connection diagram. Click here for a larger image

Class A/B MOSFET Amplification

The NAU660 boasts Micro Class A/B amplifier topology for lower distortion, complete with a PWM power supply for solid power regulation, and high speed MOSFET output devices for excellent sound reproduction.

Gold-Plated Connections

The NAU660 features gold-plated power, ground, speaker and RCA connections, for resisting corrosion and delivering a clean signal.

High- and Low-Pass Filters

Dial in the output as appropriate for your system with adjustable hi-pass and lo-pass crossovers, both from 40-250Hz.

Ready for the Marine Environment

Marine gear has an even tougher environment than its automaobile counterpart. To that end, the NAU660’s heat sink enclosure, paint, and silk screening are UV and salt water resistant. Marine-grade conformal coated circuit boards are used to resist corrosion from salt spray and moisture. Finally, a non-corrosive brushed aluminum extrusion provides an attractive and durable surface finish.

ABYC Compliant

The American Boat and Yacht Council (ABYC) is a trade organization who set forth voluntary standards for all aspects of boat design and construction. The NAU660 is designed to conform to the group’s marine electronic standards.

Daisy-Chain Ready

For multiple amplifier applications, the amps also feature Line Outputs so daisy-chaining additional amps without the need for Y-cable adapters can be easily executed.

About MB Quart

Bring the luxuries of home to the open water with German-engineered MB Quart marine audio visual equipment. Founded more than 50 years ago in Obrigheim, Germany, MB Quart has integrated high acoustical clarity, easy-to-use designs and sleek products to evolve into the premier manufacturer of entry-level to high performance marine audio visual systems. In an industry where only the strongest survive, MB Quart established itself early by producing world-class automobile and home audio visual equipment. Rain, nor saltwater or even extreme temperatures will destroy MB Quart products, as each one has already survived stringent tests, replicating years of operation.

NAU660 Select Specifications

Power Rating: 6 x 120 watts at 4 ohms peak (6 x 60 watts RMS)
6 x 200 watts at 2 ohms peak (6 x 100 watts RMS)
3 x 400 watts at 4 ohms bridged peak (3 x 200 watts RMS)
T.H.D: < 0.05%
S/N Ratio: 93dB
Input Sensitivity Range: 0.2V to 6.0V
Channel Separation: 80dB
Crossover Frequency (High- and Low-Pass: 40 – 250Hz
Fuse: 70A x 1
Dimensions: 18 x 9.76 x 2.6 Inches (L x W x H)

What’s in the Box

MB Quart Marine NAU660 A/B Class 6-Channel Amplifier, Installation Hardware, Documentation



Related Infinity Car Amplifier Products

No products found.

by

No products found.

by

JBL GTO608C 6.5-Inch 2-Way Component System Reviews

JBL GTO608C 6.5-Inch 2-Way Component System

  • 6-1/2″ / 6-3/4″ two-way component system with woofer, tweeter, crossover and mounting system
  • Plus One woofer cone with rubber surround
  • One-inch mylar-titanium tweeter
  • Outboard crossover with tweeter-level control
  • 210 Watts peak power handling; 2 ohm impedance

JBL 6-1/2″ 2-Way Component SystemThe GTO608C features Plus One woofer cones, with more surface area than that found on competing models of the same size. It also has computer-optimized, voice-matched passive crossover to ensure optimum transition from the midwoofer to the midrange speaker and the tweeter; My-Ti (Mylar/titanium composite) tweeters for increased power handling, reduced distortion and increased efficiency; and the I-Mount tweeter-mounting system for easy and versatile installation.


The GTO tweeter is both strong and lightweight while being adjustable

The Plus One woofer cone increases
bass output and efficiency

The patented Starfish and I-Mount tweeter mount system optimizes sound quality and makes install into factory systems easy. Click to Enlarge.

Why JBL Sound?

For more than 60 years, JBL products have been bringing home the impact and excitement of the world’s best recording studios, movie theaters and concert venues. Now, JBL engineers are creating these world-class listening experiences in the car. Thanks to advanced technology developed in the professional arena, JBL mobile products simply sound better than the competition. High output, superb bass response, long life and smooth response are all things you can expect from any speaker that wears the JBL badge. So join enthusiasts who know audio, and don’t settle for anything but JBL in your vehicle. Bring the sound of the show on the road.

Listen Loud
The last thing you want to worry about is the quality of your speakers. We understand. All new JBL mobile products have to go through nearly 500 hours of environmental testing. We put them under temperatures fluctuating between -35° C and +90° C with up to 90 percent air humidity for more than 200 hours. We expose speakers to UV light for more than 150 hours to simulate a mounting location on a car’s rear deck. We even shake things up, as all of our new mobile audio products have to pass extensive vibration testing before we release them for production. We’ve made unparalleled efforts to ensure the best possible quality so that you can listen long and loud when you crank up a JBL speaker.

Edge-Driven, Mylar-Titanium Tweeter
The JBL GTO608C component system uses a 1-inch (25-millimeter) Mylar-titanium (My-Ti) tweeter with a large voice coil–much like a voice coil found in high-end home audio speakers. The benefit of the Mylar and titanium blend in making a tweeter is that it is lightweight and has remarkable strength. At the same time, its large voice coil increases power handling and reduces distortion at high output levels. This tweeter design also helps create more seamless integration with the woofer. The GTO608C’s tweeter is even adjustable, so you can modify it to optimize the sound. The result? True, high-end, audiophile-quality performance.


The in-line crossover network creates seamless sound with the woofer Click to Enlarge.

Look for the True 4 ohm logo for the best real world performance

Intermount III makes installation into any factory location simple
Click to Enlarge

Computer-Optimized Outboard Crossover
When you want the best sound possible in your vehicle, only a JBL system will do. Like a high-end JBL home speaker, the JBL GTO608C component system employs a high-quality, computer-optimized outboard crossover that accurately and smoothly projects sound where it needs to go. Think of the crossover as a traffic cop for directing sound. When your music reaches your GTO608C speaker system from your amplifier or head unit, the crossover directs high frequencies to the tweeter and the midrange, and low frequencies to the woofer. Since we have engineered the crossover specifically for the high performance of the GTO608C component system, it provides incredible detail, smooth midrange and increased power handling. The result is an extraordinary listening experience that you would never expect to hear in the front seat of a car.

Bass that Booms

Plus One Cone
The JBL GTO608C component system uses a 6-1/2-inch (160-millimeter) woofer with the patent-pending JBL Plus One cone technology. Plus One technology gives the GTO608C more cone surface than competing models of the same size–up to 30 percent more in many cases. With a larger cone area, the GTO608C speakers provide higher efficiency and better bass response. Add a low-Q woofer design for higher bass output from the typical mounting location and 210-watt peak power handling, and the GTO608C will really get your car booming.

Powerful Performance

True 4-Ohm Topology
Low-impedance speaker voice coils extract more power from your amp for more powerful performance than high-impedance coils do. JBL GTO608C component-system speakers use a lower-impedance voice coil than a typical 4-ohm speaker to extract the most power possible from all amplifiers engineered to drive loads of 4 ohms or less. And the GTO608C component system is compatible with both aftermarket head units and factory-installed systems. Since many factory-installed systems incorporate 2-ohm speakers and include amplifiers designed to drive 2-ohm loads, replacing those reduced-impedance speakers with a typical 4-ohm model will reduce the power output from the amplifier. For the most powerful performance, the GTO608C component system makes the best use of any amplifier by providing an optimum 2-ohm load.

An Easy Install

I-Mount Tweeter-Mounting System
If you are upgrading the sound in your vehicle to the GTO608C component system, JBL’s proprietary I-Mount (patent no. 5,859,917) tweeter system makes it easy to flush-mount or surface-mount the tweeter. But being easy to mount isn’t enough. A tweeter has to sound good as well. If you flush-mount the GTO608C, you can use our innovative flush-mount cup to angle the tweeters and lock them into the best angle for optimum response and imaging.

Starfish Tweeter-Mounting System
What about when you want to replace the factory-installed component system that comes in many of today’s vehicles while keeping that “factory-built” look? JBL engineering has made that easy, too. The GTO608C features JBL’s Starfish tweeter-mounting system. It simplifies mounting the tweeter in any number of ways behind factory grilles and panels, and it doesn’t require any special modifications.

Intermount III (Patent Number 6,505,705) Mounting System
Doing it yourself? Installing GTO608C speakers in nearly any factory-built location is a breeze. Designed as replacements for factory-installed OEM speakers, they easily install into nearly any factory-built 6-1/2-inch location without requiring any special tools or modifications. To make installation even easier, the GTO608Cs use JBL’s patented Intermount III mounting system. Depending on the vehicle, the factory-built 6-1/2-inch location can actually vary in size from 6 inches all the way up to 6-3/4 inches, thanks to the GTO608C’s included installation rings. Even if you are upgrading an older set of aftermarket speakers, the GTO608C makes replacing them easy.

And with such easy installation, you’ll be listening to your new JBL speakers in no time at all.

The JBL GTO608c component system delivers high output, superb bass response, long life and smooth response.

Highlights

  • Great JBL Sound Quality
  • My-Ti delivers smooth highs and great imaging
  • Plus One woofer cones for the high output and deep bass
  • Computer optimized outboard crossover means audiophile sound quality
  • True 4-Ohm design pulls the most power out of your system
  • Easy to install

What’s in the Box
One pair of JBL GTO608C component speakers, one set of in-line crossover networks, one set of tweeters, installation hardware



More Jbl Car Amplifier Products

No products found.

by

No products found.

by

Car Audio Tags: