inch

KRK K10S Powered Subwoofer – 10 Inch, 225 Watts

KRK K10S Powered Subwoofer – 10 Inch, 225 Watts

  • 225 Watt (peak) powered subwoofer for studio use
  • SPL rating of 110db music and 113db peak
  • Frequency response of 34 Hz- 50Hz to 130Hz variable
  • 10 inch high excursion glass aramid composite woofer
  • Variable and sweepable low pass filter

KRKs KRK10s powered subwoofer is the perfect complement to KRK Rokit, VXT, or any other 4-8 studio monitor. The KRK10s is designed to extend the low-frequency performance of an existing monitor system so that the low-frequency portion of the mix can be properly engineered. The KRK10s also feature a great looking cabinet that echoes the curved edges of the Rokit and VXT monitors. The front-firing bass port and KRKs trademark yellow glass-aramid composite woofer ensure accurate and powerful low-end punch. A sturdy grill protects the woofer and adds to the sleek appearance of the unit. A high-power amplifier and active crossovers provide smooth and accurate reproduction.New curved design and custom color matches KRK Rokit and VXT monitorsProtective Steel front Grill provides protectionPower LED provides visual indication of units statusBypass footswitch allows for checking mixes with and without subwooferIntegrated crossover matches any main speaker systemGround lift switch tames ground loopsUsers manual provides clear setup instructionsScientifically designed front firing port reduces wall coupling and port turbulencePowerful bass reinforcement with KRKs trademark yellow-cone glass-aramid wooferTech Specs225 Watt (peak) Powered Subwoofer for Studio UseSPL: 110dB Music and 113dB Peak10 High-Excursion Glass Aramid Composite WooferFrequency Response: 34Hz 50Hz to 130Hz Variable (+/- 1.5 db)Variable and Sweepable Low Pass Filter80Hz High Pass FilterRadically Curved Front Baffle Design for Amazing PerformanceFront-firing port provides low frequency extension without boundary couplingBypass Control using Standard FootswitchA New Standard in Low Frequency Monitoring.For years, KRK subwoofers have been the choice for accurate low frequency monitoring in studios large and small. Now, the KRK10s provides a new standard for even better performance and accuracy, raising the bar once again. The KRK K10S powered subwoofer is designed to extend the low frequency portion so your mix can be properly engineered. The K10S cabinet has radically curved surfaces for a great look and amazing performance. The front-firing bass port and KRK’s trademark yellow glass-aramid composite woofer ensure accurate and powerful low-end punch. A sturdy grill which is removable protects the woofer and adds to the sleek appearance of the unit. A high power amplifier and active crossovers provide smooth and accurate reproduction. To accommodate any studio environment, the K10s has RCA, 1/4 inch (balanced/unbalanced) or XLR inputs for all your input options.

KRK K10S Powered Subwoofer Features:

  • 225 Watt (peak) powered subwoofer for studio use
  • SPL rating of 110db music and 113db peak
  • Frequency response of 34 Hz- 50Hz to 130Hz variable
  • 10 inch high excursion glass aramid composite woofer
  • Variable and sweepable low pass filter
  • 80Hz high pass filter
  • Radically curved front baffle design for amazing performance
  • Front firing port provides low frequency extension without boundary coupling
  • Bypass control using standard footswitch

A New Standard in Low Frequency Monitoring For years, KRK subwoofers have been the choice for accurate low frequency monitoring in studios large and small. Now, the K10s provides a new standard for even better performance and accuracy, raising the bar once again. Whether you are mixing in a 2.1 or 5.1 surround environment or just looking to upgrade the low-frequency extension of your existing monitors, the K10s will provide the low frequency detail and accuracy that will help you to create a better mix.

Let’s Be Up Front Take a look at competitive subwoofer monitors and you’ll find ports on the back of the cabinet. These rear-firing ports tend to create bass coupling with walls and corners over-amplifying low frequency information which in turn colors your mix. The superior design of the KRK10s includes front-firing ports which are just the right shape to reduce port turbulence. You’ll appreciate the clean and accurate bass performance this approach delivers, even at high SPLs.

Feel the Bass You need to feel the bass and our proprietary signature yellow woofer delivers tight, clear low end response. Our engineers and listening panel took the K10s speaker voicing to even more accurate levels. Featuring a sweepable 50 Hz – 130 Hz low pass filter, your K10s provides flexible control for any monitoring system. What you hear is what you are intended to hear, coloration is not part of the spec. This performance is brought to you by drivers that are custom-designed by our world-class studio monitor engineering team, for a clear, low-distortion performance.

Take Control Professional engineers like the ability to hear how the sub is affecting the mix. Your KRK subwoofer is equipped with a bypass feature which allows you to defeat the sub and provide full range audio to your recording monitors. To use the bypass function, you will need to use a standard latching 1/4 mono footswitch.



Find More Jensen Car Stereo Products

AmazonBasics 16-Gauge Speaker Wire - 100 Feet
by AmazonBasics AmazonBasics 16-Gauge Speaker Wire - 100 Feet(225) Buy new: CDN$ 12.99 CDN$ 11.99
by

No products found.

by

Fahrenheit TID-830NR In Dash Source Unit DVD Player Single DIN with 8.3 – Inch Touchscreen Flip Out Monitor

Fahrenheit TID-830NR In Dash Source Unit DVD Player Single DIN with 8.3 – Inch Touchscreen Flip Out Monitor

  • Full Control i-Pod Integration: Browse through your iPod and search-out your favorite artists, albums or videos with TID-830’s iPod interface. Requires IC-2 cable.
  • Mini-USB Port: Connect a 32gb flash drive or 16gb SD card for MP3 audio and MP4 video playback, or view & save photos with the JPG photo viewer.
  • 2V Pre-Amp Outputs for separate front, rear, subwoofer, and line-level RCA pre-amp outputs on the back of TID-830, all 2V max.
  • High Definition Digital Display: With a screen resolution of 800 x 480, your movies come to life in high definition quality you’d expect only from your home theater!
  • World’s First 8.3″ Flip-up Source Unit! Nearly 40% More Viewing Area Than 7″! Compare TID-830NR’s massive 8.3″ screen to your friends inadequate 7″ flip-up screen, you’ll see the difference!

Single DIN TFT-LCD Touchscreen A/V head unit. Features World’s Largest 8.3″ Motorized Flip out Face with Angle Adjustment, Playback from 16GB SD, 32GB USB Drive, Rear View Camera Input w/ Trigger, Upload Custom Backgrounds & Screen Savers, Choose from 3 Graphic User Interfaces, 50w x 4 MOSFET Speaker Outputs, NTSC/PAL Video Playback, Touchscreen has 800 x 480 Widescreen Resolution and 400 NIT LED back lit Brightness. Optional: iPod cable IC-2 , Digital TV tuner DTV-MHU, Navigation – NaviBox-1 Navteq 12 Million POI A2DP for Wireless MP3 Playback



More Power Acoustik Car Stereo Products

No products found.

by

No products found.

by

Polk Audio DXI 124 SVC 12 Inch Subwoofer Reviews

Polk Audio DXI 124 SVC 12 Inch Subwoofer

  • 12 inch subwoofer
  • Marine Certified

Polk Audio DXI124 SVC 12in Single-Voice-Coil 720-Watts 4-Ohm Subwoofer – Black This single-voice-coil subwoofer features Dynamic Balance driver technology for pure, distortion-free sound. The 720W peak power handling and 27Hz – 200Hz frequency response provide rich bass with a wide range of highs and lows for expressive sound. Features Handles up to 720W peak output 4 ohms For powerful sound. 27Hz – 200kHz frequency response For a wide range of accurate sound production. 88dB sensitivity Picks up the highs and lows for faithful sound reproduction. Polymer woofer cone Produces rich, deep sound. The butyl rubber surround provides long-lasting use and withstands harsh conditions. 8 ohm impedance Conducts power to keep speakers working at optimal levels. High-temperature copper voice coil and polyamide former Stand up to rigorous use while maintaining low distortion for punchy bass output. Nickel-plated, heavy-duty input terminals Accommodate speaker wire up to 8 AWG or twisted pairs of 12 AWG. Klippel-optimized driver components Provide optimal performance, even at extreme listening levels. Specifications Woofer Size: 12″ Woofer Material: Polymer composite Magnet Size: 5-1/2″ Magnet Type: Ferrite Continuous Power Handling: 360W Peak Power handling: 720W Impedance: 4 ohms Connection Type: Nickel-plated fast-ons Number of Voice Coils: 1 Efficiency: 88dB Frame Material: Stamped steel Surround Material: Rubber Recommended Installation Type: Sealed box Recommended Cubic Feet (box): 0.88 cu. ft. Dimensions Product Height 6-7/8″ Product Width 12-7/16″ Product Depth 6-5/16″ Woofer Size 12″



No products found.

by

No products found.

by

Pioneer TSSW251 Shallow Mount 10 Inch 800 Watts Subwoofer

Pioneer TSSW251 Shallow Mount 10 Inch 800 Watts Subwoofer

  • Subwoofer Size: 10 Inches
  • Designed to fit into small spaces under seat, behind seat or Rear Side
  • 800 Watts
  • Flat Woofer

Less than 3.5-inches deep and requires an extremely small enclosure making it the ideal subwoofer for consumers who want the added benefits of bass in their cars but are not fond of the inconvenience associated with large subwoofer enclosures.

The subwoofer is packed with additional new features including C-type shaped reinforced nodes, M-shaped three-layer fiber woven radial surround, interlaced ultra-long glass fiber reinforced IMMP cone, large magnet circuitry and 2-piece T-pole yoke all of which help produce great audio quality for this extremely shallow speaker. Because of the air suspension technology, the subwoofer requires much less than the standard 1.0 cubic foot of enclosure volume to perform at its optimal level.
BR>The rear of the subwoofer features a stamped metal fin-shape directional basket directing air movement sideways, to eliminate the loading effect when the rear of the subwoofer is installed too close to the wall of a speaker enclosure. Additional features of the subwoofer include increased input power capabilities and spring loaded input terminals.This 10-inch shallow subwoofer handles 800 watts max., 200 watts nominal power, and delivers deep bass with top-notch sound quality thanks to features like Pioneer’s extremely strong and lightweight interlaced composite IMPP Cone.

Pioneer’s Shallow Series Subs

Lean and Mean
The Pioneer Shallow Series subwoofer derives its big bass sound from its innovative design. Although only 3-1/4 inches thick, the Shallow Series uses state-of-the-art, patented air suspension technology to create a tight spring of pressure that delivers a wide-ranging bass response. The result is a radically thin subwoofer that fits a variety of enclosures and gives your system accurate, powerful, and satisfying bass.

“ib-FLAT”
Known as the “flat” subwoofer, the ib-FLAT name is derived from the speaker’s two most outstanding characteristics. The “i” stands for intelligent design and describes the cutting-edge air-suspension technology that gives the speaker its remarkable size and strength. “b FLAT” refers to its ability to accurately and easily play 29.135 Hertz, the sound of the lowest black key on the piano and one of the most difficult to reproduce. Musical and robust, the ib-FLAT boasts an amazing range, enabling you to hear each performance on a grand scale.

Install Anywhere
The sleek design and compact size of Pioneer Shallow Series subs enables you to perform great custom installations. The Shallow Series plays perfectly in both tight and hidden spaces, providing you with the same booming bass performance of a regular subwoofer. Whether hidden or seen, the big bass sound of these versatile speakers will definitely get you noticed.



TS-SW251 Features

Air Suspension System
In order to create a subwoofer that is three and a quarter inches deep, Pioneer had to develop revolutionary subwoofer technology. A traditional subwoofer uses the spider design to keep the voice coil of the speaker aligned while it moves. This type of set-up can become soft over time degrading the subwoofer’s performance. Pioneer created a patent-pending air suspension system that locks air between a main cone and a drive cone. The cones move together in unison, with the locked-in air behaving like a spring. The dual-cone structure is a spider-less design that maintains better sound linearity, and reliability even after many of hours of hard use.

The pressure from the trapped air results in a consistent bass response across a wide frequency range. The result is a tight, precise movement with powerful and clean bass output.

3-Layer Interwoven Radial Surround
The shallow subwoofer incorporates an innovative woven cloth reinforced radial urethane surround for improved power handling, reduced distortion, improved durability, and louder, more controlled bass. The surround is constructed of three layers–two of urethane and one of interwoven cloth. The interwoven cloth distributes strength throughout the surround material and improving its high power capability. The result is an extremely durable and resilient surround that resists puckering, even under intense power conditions.

Unlike traditional surrounds that use a single arch shape design, the Pioneer Shallow Subwoofer utilizes a patent-pending M-shape surround that provides superior sound linearity.

M-Shaped Surround
The M-shape surround also has a lower height, and a lower fc or tuning frequency. The lower fc threshold translates to better and longer performance at lower frequencies.

Angled Push Terminals
Traditional subwoofer terminals are mounted horizontally or vertically. These mounts force wires to be bent to fit which can be difficult if low-gauge high performance wires are used. The Pioneer shallow subwoofer’s patent-pending, angled push terminals make it easy to connect speaker wires. The straighter connection saves space and makes installation easier.

Fin-Shaped Basket
Traditional subwoofers push air downward. This creates a “loading effect’ or area of pressure underneath the speaker which hampers performance and responsiveness. The rear of the powerful and slim Pioneer shallow subwoofer is designed with specially-shaped fins that channel the airflow sideways instead of downward. Air is continuously pushed in a circular motion, eliminating the “loading effect” or unwanted pressure of air behind the cone.

This 10-inch shallow subwoofer handles 800 watts.
Click to enlarge.


TS-SW251 Specs

Size: 10-Inch
Woofer Cone Material: Composite IMPP using Interlaced Carbon Fiber and Glass Fiber
Surround: Dual 3-Layer Fiber-Woven Radial Surround
Voice Coil: Copper Round
Voice Coil Wire: 4-Layer
Voice Coil Bobbin: FQG
Magnet Construction: Strontium
Gasket: 1-Piece, ABS
Watts MAX. Music Power: 800 Watts
Watts Nominal Power Handling: 200 Watts
Frequency Response: 20 ~ 144Hz
Sensitivity: 89dB
Ohm Rating: 4 ohm
Dimensions: 10-9/10 in x 3-6-10 inches
Mounting Depth: 3-1/10″

Pioneer Car Audio Systems

Pioneer’s Mobile Business Group is known for offering the kind of in-car products that make driving more enjoyable by offering high quality audio and video, seamless connectivity and ease-of-use. Its focus is on the development of new digital technologies including audio video, navigation and satellite radio, while maintaining its strong heritage in products for car audio enthusiasts and sound competitors.


What’s in the Box

Pioneer TS-SW251 Subwoofer, Mounting Screws/Washers, Installation Guide



Find More Pioneer Car Amplifier Products

No products found.

by

No products found.

by

Audiobahn AW1571T 1000 Watt 15 Inch DVC Car Audio Subwoofer Dual 4 Ohm Sub Reviews

Audiobahn AW1571T 1000 Watt 15 Inch DVC Car Audio Subwoofer Dual 4 Ohm Sub

  • 1000 Watt 15 Inch DVC Car Subwoofer Dual 4 Ohm Sub
  • 1000 Watts Peak Handling/500 Watts RMS Power Handling
  • 2″ 4-Layer Edge Wound AVS Voice Coil Design
  • Non-Pressed 2-Layer Poly-Coated Paper Cone Woofer
  • Multi-Connect Lug Lock Terminals

This is an Audiobahn AW1571T high-performance 15″ inch car audio subwoofer. Featuring a dual black anodized aluminum and layer edged wound dual 4-ohm voice coil, this 15″ inch subwoofer can handle an amazing 1000 watts of total power (500 watts RMS). Also featured, are large lug lock terminals. These terminals enable you to wire this powerful sub with large gauge cables into a 2 or 8 ohm load. The extended pole piece, vented oversized back plate, flat spider design and 1 ½” treated foam surround, allows this powerful subwoofer to produce more excursion without bottoming out and cooler temperatures; which equals, deeper bass and higher SPL levels. Not only does this sub sound great, but it looks great as well. This sub comes equipped with 3-dimensional, computer-molded chrome flames, a chrome plated heavy stamped steel basket and a large 60 oz. magnet. Other features include: a KM3 non-pressed / non-transfer paper cone and a convex dust cap.



No products found.

by

No products found.

by

Kenwood KFC-1352S 5.25 Inch 140 Watt Max Power Dual Cone Speaker System Reviews

Kenwood KFC-1352S 5.25 Inch 140 Watt Max Power Dual Cone Speaker System

5-1/2″ Dual Cone Speaker System, 140W Max Power



Related Kenwood Car Amplifier Products

No products found.

by

No products found.

by

Kicker 11KS693 6×9 Inch. 3-way Speakers (Kicker KS693)

Kicker 11KS693 6×9 Inch. 3-way Speakers (Kicker KS693)

  • Power Handling: * Peak: 600 watts per pair / 300 watts each * RMS: 200 watts per pair / 100 watts each
  • 6″ x 9″ 3-Way KS Series Car Speakers
  • Santoprene surround
  • 4 ohms impedance
  • Mounting depth: 3-3/16″

Power Handling

* 100W RMS
* 300W Max

General Features

* Drop-in factory upgrade for easy fitment into any vehicle
* Massive motor structure provides ultimate power handling, high efficiency and premium performance
* Extended Voice Coil (EVCTM) technology for high excursion and superior bass response
* Tapered curvilinear polymer cone with Santoprene® surround provides smooth transition from mid to high frequencies for accurate reproduction of the complete audio bandwidth
* Calibrated-dome tweeters with phase alignment reveal every detail

General Specifications

* Woofer: 6×9 Inches
* Mid: 1 Inch
* Tweeter: 3/4 Inch
* Impedance: 4 Ohms
* Sensitivity: 92dB
* Frequency Response: 30Hz-21kHz
* Mounting Hole Diameter: 6×8-9/16 Inches
* Mounting Depth: 3-3/16 Inches
* Grilles Included

* Top Mount Depth: 3-3/16 Inches
* Sensitivity: 92 dB
* RMS Power Range : 100 Watts
* Peak Power Handling: 300 Watts
* Impedance: 4 Ohm
* Frequency response: 30-21000 Hz
* Diameter: 6X9 Inch
* Design: 3 Way
* Shallow Mount: No



More Kicker Car Speaker Products

No products found.

by

No products found.

by

Jensen VM9414 Single DIN MultiMedia Receiver with 7-Inch Inch Flip Out Touch Screen, Integrated Navigation System Reviews

Jensen VM9414 Single DIN MultiMedia Receiver with 7-Inch Inch Flip Out Touch Screen, Integrated Navigation System

  • 7″ touchscreen
  • Made for iPod via USB
  • Secure Digital Card slot
  • A/V playback via USB
  • Built-in navigation

The Jensen VM9414 Single DIN Multimedia Receiver comes with In-dash navigation receiver with 7″ fold-out touchscreen, Internal amp, Fits single-sized (2″ tall) dash openings ,Built-in navigation system with 11 million points of interest, and Plays CDs and DVDs.



Related Jensen Car Stereo Products

No products found.

by

No products found.

by

Infinity 639I 225W 6-1/2 x 6-3/4 -Inch Three-Way Speakers (Pair) Reviews

Infinity 639I 225W 6-1/2 x 6-3/4 -Inch Three-Way Speakers (Pair)

  • The Kappa 63.9i 6-1/2-Inch 3-way speakers feature light, but stiff woven glass-fiber woofer cones that won’t flex or distort.
  • Plus One woofer cones This patent pending technology deliver a cone with more surface area than competing models of the same size.
  • Plus One woofer cones.
  • This patent pending technology deliver a cone with more surface area than competing models of the same size.

The Kappa 63.9i 6-1/2″” 3-way speakers feature light, but stiff woven glass-fiber woofer cones that won’t flex or distort. The Plus One design offers a larger surface area for improved low-frequency output and efficiency, while longer voice coils produce tighter, snappier bass. Large magnets keep the woofers running cooler by placing more steel close to the voice coils to act as a heat sink. Infinity uses the same Metal Matrix Diaphragm tweeter found in many of their popular home speakers, so you’ll hear the music the way it was recorded with minimal coloration or distortion. A super-tweeter tops off the musical spectrum by broadcasting the extreme high frequencies. The computer-optimized outboard crossover networks employ audiophile-grade components to separate highs and lows, so that the woofer and tweeters work together perfectly. Pre-wired crossovers eliminate a time-consuming step in your installation, and terminals at the end of the crossover wires screw directly to the speakers, leaving no chance for incorrect wiring.



Find More Infinity Car Speaker Products

No products found.

by

No products found.

by

Infinity 4629CFP 180W (Peak) 4 x 6 -Inch Custom Fit Two-Way Plate Speakers (Pair)

Infinity 4629CFP 180W (Peak) 4 x 6 -Inch Custom Fit Two-Way Plate Speakers (Pair)

  • The Kappa 462.9cfp 4-Inchx6-Inch plate speakers feature light, but stiff woven glass-fiber woofer cones that won’t flex or distort.
  • Plus One woofer cones This patent pending technology deliver a cone with more surface area than competing models of the same size.

The Kappa 462.9cfp 4″”x6″” plate speakers feature light, but stiff woven glass-fiber woofer cones that won’t flex or distort. The Plus One design offers a larger surface area for improved low-frequency output and efficiency, while longer voice coils produce tighter, snappier midbass. Large magnets keep the woofers running cooler by placing more steel close to the voice coils to act as a heat sink.



Infinity uses the same Metal Matrix Diaphragm tweeter found in many of their popular home speakers, so you’ll hear the music the way it was recorded with minimal coloration or distortion.



The computer-optimized outboard crossover networks employ audiophile-grade components to separate highs and lows, so that the woofer and tweeter work together perfectly. Pre-wired crossovers eliminate a time-consuming step in your installation, and terminals at the end of the crossover wires screw directly to the speakers, leaving no chance for incorrect wiring.



No products found.

by

No products found.

by

Car Audio Tags: