Peak

Infinity 609CS 270W (Peak) 6-1/2 x 6-3/4 Two-Way Component System Speakers (Pair)

Infinity 609CS 270W (Peak) 6-1/2 x 6-3/4 Two-Way Component System Speakers (Pair)

  • The Kappa 60.9cs component speaker system features 6-1/2-Inch woofers with responsive woven glass-fiber
  • Plus One (patent pending) woven-glass-fiber woofer cone Edge-driven MMD-dome tweeter Outboard passive crossover with air core inductors
  • Tweeters handle down to 2,500 Hz
  • Low-frequency output
  • The Plus One design
  • 6-1/2-Inch woofers with responsive woven glass-fiber
  • Longer voice coils add some punch to the bass

The Kappa 60.9cs component speaker system features 6-1/2″” woofers with responsive woven glass-fiber cones that won’t flex during a hard workout. The Plus One design offers a larger surface area for improved low-frequency output and efficiency, while longer voice coils add a little more punch to the bass. Large magnets keep the woofers running cooler by placing more steel close to the voice coils to act as a heat sink.



Infinity uses the same textile dome tweeters found in many of their popular home speakers with this Kappa system, so you’ll hear the music the way it was recorded with minimal coloration or distortion. The tweeters handle down to 2,500 Hz, almost an octave below the tweeters in many systems, so you’ll hear more definition and detail, no matter where you sit. Infinity includes mounting hardware to install the tweeters in custom or factory openings.



The computer-optimized outboard crossover networks employ audiophile-grade components to separate highs and lows, so that the woofer and tweeter work together perfectly. You can attenuate tweeter response by 6 dB to get the perfect sonic balance if you’ve mounted the tweeters in a less-than-ideal factory location.



Pre-wired crossovers eliminate a time-consuming step in your installation, and terminals at the end of the crossover wires screw directly to the Kappa woofers and tweeters, leaving no chance for incorrect wiring.



Related Infinity Car Speaker Products

by

No products found.

by

Infinity 4629CFP 180W (Peak) 4 x 6 -Inch Custom Fit Two-Way Plate Speakers (Pair)

Infinity 4629CFP 180W (Peak) 4 x 6 -Inch Custom Fit Two-Way Plate Speakers (Pair)

  • The Kappa 462.9cfp 4-Inchx6-Inch plate speakers feature light, but stiff woven glass-fiber woofer cones that won’t flex or distort.
  • Plus One woofer cones This patent pending technology deliver a cone with more surface area than competing models of the same size.

The Kappa 462.9cfp 4″”x6″” plate speakers feature light, but stiff woven glass-fiber woofer cones that won’t flex or distort. The Plus One design offers a larger surface area for improved low-frequency output and efficiency, while longer voice coils produce tighter, snappier midbass. Large magnets keep the woofers running cooler by placing more steel close to the voice coils to act as a heat sink.



Infinity uses the same Metal Matrix Diaphragm tweeter found in many of their popular home speakers, so you’ll hear the music the way it was recorded with minimal coloration or distortion.



The computer-optimized outboard crossover networks employ audiophile-grade components to separate highs and lows, so that the woofer and tweeter work together perfectly. Pre-wired crossovers eliminate a time-consuming step in your installation, and terminals at the end of the crossover wires screw directly to the speakers, leaving no chance for incorrect wiring.



No products found.

by

No products found.

by

Infinity 329CF 105W Peak 3-1/2 -Inch Custom Fit Two-Way Speakers (Pair)

Infinity 329CF 105W Peak 3-1/2 -Inch Custom Fit Two-Way Speakers (Pair)

  • The Kappa 32.9cf 3-1/2-Inch speakers feature light, but stiff woven glass-fiber woofer cones that won’t flex or distort.
  • Plus One woofer cones This patent pending technology deliver a cone with more surface area than competing models of the same size.

The Kappa 32.9cf 3-1/2″” speakers feature light, but stiff woven glass-fiber woofer cones that won’t flex or distort. The Plus One design offers a larger surface area for improved low-frequency output and efficiency, while longer voice coils produce tighter, snappier midbass. Large magnets keep the woofers running cooler by placing more steel close to the voice coils to act as a heat sink.



Infinity uses the same Metal Matrix Diaphragm tweeter found in many of their popular home speakers, so you’ll hear the music the way it was recorded with minimal coloration or distortion. The dome tweeters pivot, allowing you to adjust them for better stereo imaging.



The computer-optimized outboard crossover networks employ audiophile-grade components to separate highs and lows, so that the woofer and tweeter work together perfectly. Pre-wired crossovers eliminate a time-consuming step in your installation, and terminals at the end of the crossover wires screw directly to the speakers, leaving no chance for incorrect wiring.



Find More Infinity Car Speaker Products

No products found.

by

No products found.

by

JBL JRX118S Single 18-Inch 350W Continuous, 1400W Peak Passive Sub Bass Loudspeaker with Pole Mount

JBL JRX118S Single 18-Inch 350W Continuous, 1400W Peak Passive Sub Bass Loudspeaker with Pole Mount

  • JBL 18 in high power woofer with a cast frame and 3 inch voice coil
  • Solid Perforated Kick Proof 18 gauge Grille to protect ithe speaker form damage
  • Tough acoustically Superior enclosure constructed using 19mm MDF for improved LF performance
  • Non resonant Steel Handles
  • Top Mounted 35mm Pole Mount socket for JBL’s SS3-BK Pole

JBL JRX118S Single 18 Inch 350W Continuous, 1400W Peak Passive Sub Bass Loudspeaker in a Robust Black Carpet Covered Cabinet with Pole Mount.



No products found.

by

No products found.

by

Infinity 429I 150W (Peak) 4 -Inch 2-Way Speaker (Pair)

Infinity 429I 150W (Peak) 4 -Inch 2-Way Speaker (Pair)

  • The Kappa 42.9i 4-Inch speakers feature light, but stiff woven glass-fiber woofer cones that won’t flex or distort.
  • Plus One woofer cones This patent pending technology deliver a cone with more surface area than competing models of the same size.

The Kappa 42.9i 4″” speakers feature light, but stiff woven glass-fiber woofer cones that won’t flex or distort. The Plus One design offers a larger surface area for improved low-frequency output and efficiency, while longer voice coils produce tighter, snappier midbass. Large magnets keep the woofers running cooler by placing more steel close to the voice coils to act as a heat sink.



No products found.

by

No products found.

by

Infinity 6829CF 300W (Peak) 6 x 8 / 5 x 7 -Inch 2-Way Speakers (Pair) Reviews

Infinity 6829CF 300W (Peak) 6 x 8 / 5 x 7 -Inch 2-Way Speakers (Pair)

  • The Kappa 682.9cf 5-Inchx7-Inch/6-Inchx8-Inch speakers feature light, but stiff woven glass-fiber woofer cones that won’t flex or distort.
  • Plus One woofer cones This patent pending technology deliver a cone with more surface area than competing models of the same size.

The Kappa 682.9cf 5″”x7″”/6″”x8″” speakers feature light, but stiff woven glass-fiber woofer cones that won’t flex or distort. The Plus One design offers a larger surface area for improved low-frequency output and efficiency, while longer voice coils produce tighter, snappier bass. Large magnets keep the woofers running cooler by placing more steel close to the voice coils to act as a heat sink.



Infinity uses the same Metal Matrix Diaphragm tweeter found in many of their popular home speakers, so you’ll hear the music the way it was recorded with minimal coloration or distortion. The dome tweeters pivot, allowing you to adjust them for better stereo imaging.



The computer-optimized outboard crossover networks employ audiophile-grade components to separate highs and lows, so that the woofer and tweeter work together perfectly. Pre-wired crossovers eliminate a time-consuming step in your installation, and terminals at the end of the crossover wires screw directly to the speakers, leaving no chance for incorrect wiring.



No products found.

by

No products found.

by

Infinity 629I 225W (Peak) Two-Way Speakers (Pair)- 6-1/2 x 6-3/4 -Inch

Infinity 629I 225W (Peak) Two-Way Speakers (Pair)- 6-1/2 x 6-3/4 -Inch

  • The Kappa 62.9i 6-1/2-Inch speakers feature light, but stiff woven glass-fiber woofer cones that won’t flex or distort.
  • Plus One woofer cones This patent pending technology deliver a cone with more surface area than competing models of the same size.

The Kappa 62.9i 6-1/2″” speakers feature light, but stiff woven glass-fiber woofer cones that won’t flex or distort. The Plus One design offers a larger surface area for improved low-frequency output and efficiency, while longer voice coils produce tighter, snappier bass. Large magnets keep the woofers running cooler by placing more steel close to the voice coils to act as a heat sink.



Read More
Infinity uses the same Metal Matrix Diaphragm tweeter found in many of their popular home speakers, so you’ll hear the music the way it was recorded with minimal coloration or distortion. The dome tweeters pivot, allowing you to adjust them for better stereo imaging.



The computer-optimized outboard crossover networks employ audiophile-grade components to separate highs and lows, so that the woofer and tweeter work together perfectly. Pre-wired crossovers eliminate a time-consuming step in your installation, and terminals at the end of the crossover wires screw directly to the speakers, leaving no chance for incorrect wiring.



No products found.

by

No products found.

by

Brand New Alpine MRX-M100 Mono 1900 Watt Peak / 1000 Watt RMS “Class D” Digital Car Audio Amplifier with MOSFET Power Supply and Nickel-Plated Screw Terminals

Brand New Alpine MRX-M100 Mono 1900 Watt Peak / 1000 Watt RMS “Class D” Digital Car Audio Amplifier with MOSFET Power Supply and Nickel-Plated Screw Terminals

  • Alpine MRX-M100 Mono Class D Car Audio Amplifier
  • Peak Power: 1900 Watts
  • RMS Power: 1000 Watts
  • RMS Power @ 4 Ohm: 600 Watts x 1 Channel
  • RMS Power @ 2 Ohm: 1000 Watts x 1 Channel

Brand New Alpine MRX-M100 Mono 1900 Watt Peak / 1000 Watt RMS “Class D” Digital Car Audio Amplifier with MOSFET Power Supply and Nickel-Plated Screw Terminals
Features

Alpine MRX-M100 Mono Class D Car Audio Amplifier
Peak Power: 1900 Watts
RMS Power: 1000 Watts
RMS Power @ 4 Ohm: 600 Watts x 1 Channel
RMS Power @ 2 Ohm: 1000 Watts x 1 Channel
Amplifier Type: Class-D (Digital)
Channel Design: 1 Channel (Mono)
Thermal Management Control
DC-DC PWM Power Supply
MOSFET Power Supply
S.T.A.R. Circuitry
Over-Current, Over-Voltage and Thermal Protection
Top Mounted Blue LED Power Indicator
RCA Preout Connectors
Speaker Level Inputs
Crossover: Adjustable Low-Pass Filter
Direct FET Output
Board Design: 6th Layer PC Board
Continuously Adjustable Gain Control
Remote Bass Control
Variable Bass EQ
Subsonic Filter: Variable Subsonic Filter
Dimensions
Foot Print (WxHxD) mm: 340mm x 58mm x 230mm
Foot Print (WxHxD) in: 13-3/8″ x 2-1/4″ x 9″
Heat Sink (WxHxD) mm: 280mm x 58mm x 230mm
Heat Sink (WxHxD) in: 11″ x 2-1/4″ x 9″
Weight: 3.8kg
Power Requirements: 14.4V DC (11V to 16V)
Preamp Output: 4V (Max.)
Remote Level: 0 to -20dB (RUX-KNOB required)



More Alpine Car Amplifier Products

No products found.

by

No products found.

by

Boss ARMOR AR1500M Car Amplifier – 700 W @ 4 Ohm – @ 2 Ohm1500 W PMPO – 1 Channel – Class AB. MONOBLOCK MOSFET AMPLIFIER 1500 WATTS PEAK POWER AMREC. 105 dB SNR – 0% THD – MOSFET Power Supply

Boss ARMOR AR1500M Car Amplifier – 700 W @ 4 Ohm – @ 2 Ohm1500 W PMPO – 1 Channel – Class AB. MONOBLOCK MOSFET AMPLIFIER 1500 WATTS PEAK POWER AMREC. 105 dB SNR – 0% THD – MOSFET Power Supply

  • Standard Warranty: 1 Year
  • Manufacturer/Supplier: Boss Audio Systems
  • Manufacturer Part Number: AR1500M
  • Brand Name: Boss
  • Product Line: ARMOR
  • Product Model: AR1500M
  • Product Name: ARMOR AR1500M Car Amplifier
  • Marketing Information: Why sacrifice performance for the sake of convenience? With a slimmer chassis, ARMOR is the perfect amplifier when space is limited, and power is required. Indeed, this combination of feature-rich performance and put-it-anywhere convenience is hard to find in the automotive environment; so much so that the ARMOR may well be forging its own product category.
  • Product Type: Car Amplifier
  • Classification: Class AB
  • Channels: 1
  • Signal to Noise Ratio (SNR): 105 dB
  • Rated Power @ 4 Ohm: 1 x 700 W
  • RMS Output Power: 700 W
  • PMPO Output Power: 1500 W
  • Total Harmonic Distortion (THD): 0%
  • Power Supply: MOSFET
  • Height: 2.6′
  • Width: 6.5′
  • Depth: 11.3′
  • Package Contents: ARMOR AR1500M Car Amplifier , Remote Subwoofer Level Control



No products found.

by

No products found.

by

Brand New Alpine MRX-V60 5-Channel 600 Watt RMS / 1,200 Watts Peak “Class D” Digital Car Audio Amplifier with High Efficiency Digital Circuit

Brand New Alpine MRX-V60 5-Channel 600 Watt RMS / 1,200 Watts Peak “Class D” Digital Car Audio Amplifier with High Efficiency Digital Circuit

  • Alpine MRX-V60 600 Watt 5-Channel Digital Class D Amplifier
  • CEA-2006 Power Rating: (Per Channel, Ref: 14.4V, 4 ohms): 50W RMS ?? 4 for CH-1/2/3/4, 200W RMS x 1 for Subwoofer
  • Peak Power Output: 1200W
  • RMS Power Output Per channel into 4 Ohms: (@ 14.4V ?%THD+N) 50W + 200W
  • Per channel into 2 Ohms: (@ 14.4V ?%THD+N) 75W + 300W

Brand New Alpine MRX-V60 5-Channel 600 Watt RMS / 1,200 Watts Peak “Class D” Digital Car Audio Amplifier with High Efficiency Digital Circuit
Features:

Alpine MRX-V60 600 Watt 5-Channel Digital Class D Amplifier
CEA-2006 Power Rating:: 50W RMS ?? 4 for CH-1/2/3/4, 200W RMS x 1 for Subwoofer
Peak Power Output: 1200W
RMS Power Output Per channel into 4 Ohms: 50W + 200W
Per channel into 2 Ohms: (@ 14.4V ?%THD+N) 75W + 300W
Bridged 4 Ohms: 150W ?? 2
Crossover Frequency (LPF): 50Hz-400Hz (-12dB/oct.) for Subwofer
Crossover Frequency (HPF): 50Hz-400Hz (-12dB/oct.) for CH-1/2/3/4
EQ (Equalizer): Bass EQ (fc=50Hz): 0 to +12dB
Subsonic Filter: 5 -30Hz (-24dB/oct.)
Power Requirements: 14.4V DC (11V to 16V)
Input Sensitivity : 0.2 – 4.0V
Input Sensitivity : 0.5 – 10V
Input Impedance: i?z10k Ohms
Frequency Response for CH-1/2/3/4: 5 -45Hz
Frequency Response for Subwoofer: 5 -400Hz
Frequency Response for CH-1/2/3/4: 7 -30Hz
Frequency Response for Subwoofer: 10 -300Hz
THD+N (10W into 4 Ohms) for CH-1/2/3/4: 0.02%
THD+N for Subwoofer: 0.008%
THD+N for CH-1/2/3/4: 0.07%
THD+N for Subwoofer: 0.04%
Damping Factor for CH-1/2/3/4: i?z500
Damping Factor for Subwoofer: i?z1000
Signal to Noise (Rated Power into 4 Ohms) for CH-1/2/3/4: 104dB
Signal to Noise (Rated Power into 4 Ohms) for Subwoofer: 110dB
Remote Level: 0 to -20dB (RUX-KNOB Required)
Weight: 2.8Kg
Terminal Layout: Two-Sided
Screw Mount / Wire Cover: Integrated Wire and Mounting Screw Terminals
Amplifier Type: Class-D (Digital)
Channel Design: 4 Channel + Subwoofer
Thermal Control: Thermal Management Control
Power Supply: MOSFET
Power Supply Design: DC-DC PWM Power Supply
Board Circuitry: S.T.A.R. Circuitry
Current Protection: Over-Current, Over-Voltage and Thermal Protection
Power Indicator: Top Mounted Blue LED Power Indicator
Speaker-Level Inputs: Speaker Level



Find More Alpine Car Amplifier Products

No products found.

by

No products found.

by

Car Audio Tags: