Subwoofer

Kicker 11S10L34 4-ohm 10″ Car Audio Subwoofer 2011 S10L34

Kicker 11S10L34 4-ohm 10″ Car Audio Subwoofer 2011 S10L34

  • 10-inch Solo-Baric L3 Series Car Audio Subwoofer with dual voice coil
  • RMS Power Handling: 400-watts | PEAK Power Handling: 800-watts
  • Impedance: 4-ohms
  • Sensitivity: 85.3 dB
  • Top Mount Depth: 5-1/2″ | Cutout Dimension: 9-5/16″

10-IN Square Low Distortion Woofer, 4 ohms (Inv Code: W04)



Related Kicker Car Subwoofer Products

BOSS AUDIO MGR350B Marine Gauge MECH-LESS Receiver, with Audio Streaming
by Boss Audio Systems, Inc. BOSS AUDIO MGR350B Marine Gauge MECH-LESS  Receiver, with Audio Streaming(17) Buy new: CDN$ 112.87 CDN$ 112.46 13 used & new from CDN$ 104.98
by

No products found.

by

KRK K10S Powered Subwoofer – 10 Inch, 225 Watts

KRK K10S Powered Subwoofer – 10 Inch, 225 Watts

  • 225 Watt (peak) powered subwoofer for studio use
  • SPL rating of 110db music and 113db peak
  • Frequency response of 34 Hz- 50Hz to 130Hz variable
  • 10 inch high excursion glass aramid composite woofer
  • Variable and sweepable low pass filter

KRKs KRK10s powered subwoofer is the perfect complement to KRK Rokit, VXT, or any other 4-8 studio monitor. The KRK10s is designed to extend the low-frequency performance of an existing monitor system so that the low-frequency portion of the mix can be properly engineered. The KRK10s also feature a great looking cabinet that echoes the curved edges of the Rokit and VXT monitors. The front-firing bass port and KRKs trademark yellow glass-aramid composite woofer ensure accurate and powerful low-end punch. A sturdy grill protects the woofer and adds to the sleek appearance of the unit. A high-power amplifier and active crossovers provide smooth and accurate reproduction.New curved design and custom color matches KRK Rokit and VXT monitorsProtective Steel front Grill provides protectionPower LED provides visual indication of units statusBypass footswitch allows for checking mixes with and without subwooferIntegrated crossover matches any main speaker systemGround lift switch tames ground loopsUsers manual provides clear setup instructionsScientifically designed front firing port reduces wall coupling and port turbulencePowerful bass reinforcement with KRKs trademark yellow-cone glass-aramid wooferTech Specs225 Watt (peak) Powered Subwoofer for Studio UseSPL: 110dB Music and 113dB Peak10 High-Excursion Glass Aramid Composite WooferFrequency Response: 34Hz 50Hz to 130Hz Variable (+/- 1.5 db)Variable and Sweepable Low Pass Filter80Hz High Pass FilterRadically Curved Front Baffle Design for Amazing PerformanceFront-firing port provides low frequency extension without boundary couplingBypass Control using Standard FootswitchA New Standard in Low Frequency Monitoring.For years, KRK subwoofers have been the choice for accurate low frequency monitoring in studios large and small. Now, the KRK10s provides a new standard for even better performance and accuracy, raising the bar once again. The KRK K10S powered subwoofer is designed to extend the low frequency portion so your mix can be properly engineered. The K10S cabinet has radically curved surfaces for a great look and amazing performance. The front-firing bass port and KRK’s trademark yellow glass-aramid composite woofer ensure accurate and powerful low-end punch. A sturdy grill which is removable protects the woofer and adds to the sleek appearance of the unit. A high power amplifier and active crossovers provide smooth and accurate reproduction. To accommodate any studio environment, the K10s has RCA, 1/4 inch (balanced/unbalanced) or XLR inputs for all your input options.

KRK K10S Powered Subwoofer Features:

  • 225 Watt (peak) powered subwoofer for studio use
  • SPL rating of 110db music and 113db peak
  • Frequency response of 34 Hz- 50Hz to 130Hz variable
  • 10 inch high excursion glass aramid composite woofer
  • Variable and sweepable low pass filter
  • 80Hz high pass filter
  • Radically curved front baffle design for amazing performance
  • Front firing port provides low frequency extension without boundary coupling
  • Bypass control using standard footswitch

A New Standard in Low Frequency Monitoring For years, KRK subwoofers have been the choice for accurate low frequency monitoring in studios large and small. Now, the K10s provides a new standard for even better performance and accuracy, raising the bar once again. Whether you are mixing in a 2.1 or 5.1 surround environment or just looking to upgrade the low-frequency extension of your existing monitors, the K10s will provide the low frequency detail and accuracy that will help you to create a better mix.

Let’s Be Up Front Take a look at competitive subwoofer monitors and you’ll find ports on the back of the cabinet. These rear-firing ports tend to create bass coupling with walls and corners over-amplifying low frequency information which in turn colors your mix. The superior design of the KRK10s includes front-firing ports which are just the right shape to reduce port turbulence. You’ll appreciate the clean and accurate bass performance this approach delivers, even at high SPLs.

Feel the Bass You need to feel the bass and our proprietary signature yellow woofer delivers tight, clear low end response. Our engineers and listening panel took the K10s speaker voicing to even more accurate levels. Featuring a sweepable 50 Hz – 130 Hz low pass filter, your K10s provides flexible control for any monitoring system. What you hear is what you are intended to hear, coloration is not part of the spec. This performance is brought to you by drivers that are custom-designed by our world-class studio monitor engineering team, for a clear, low-distortion performance.

Take Control Professional engineers like the ability to hear how the sub is affecting the mix. Your KRK subwoofer is equipped with a bypass feature which allows you to defeat the sub and provide full range audio to your recording monitors. To use the bypass function, you will need to use a standard latching 1/4 mono footswitch.



Find More Jensen Car Stereo Products

No products found.

by

No products found.

by

THUMP AT-8 Car Subwoofer Box Enclosure w/2- 800 Watt 8 ” Sub Speakers

THUMP AT-8 Car Subwoofer Box Enclosure w/2- 800 Watt 8 ” Sub Speakers

  • 2-Way Subwoofer Box Speaker System
  • 800 Watts Power Handling
  • Two 8 Inch Subwoofers
  • Two Compression Horn Tweeters
  • Easy Carrying Handle

This is a brand new, factory sealed, and never been opened THUMP AT-8 loaded 2-way subwoofer box speaker enclosure which retails for 9.99 plus sales tax. This perfectly matched 2-way system handles 800 watts of rock solid power! The dual ported trapezoidal enclosure comes loaded with two THUMP 8 inch subwoofers that feature Poly-laminate cones and triple treated surrounds. It is also equipped with two THUMP optimized compression horn tweeters which deliver crystal clear highs. The heavy duty enclosure features 3/4″ medium density fiberboard construction protected by a layer of blue aviation grade carpet, so you can count on great performance for the long term. It also features a carrying handle for easy transport. This has 4 ohm impedance which is designed to get maximum power from your amp. With a dimension of only 28″ W x 6.5″ BD x 4.5″ TD x 10″ H this will fit virtually anywhere. Complete with a full warranty and our exclusive 30 day money back guarantee.



Find More Jbl Car Speaker Products

No products found.

by

No products found.

by

Infinity Reference 1062w 10-Inch 1,100-Watt High-Performance Subwoofer (Dual Voice Coil)

Infinity Reference 1062w 10-Inch 1,100-Watt High-Performance Subwoofer (Dual Voice Coil)

  • 10-inch dual voice coil subwoofer with 1100 Watts peak power handling
  • High-efficiency polypropylene woofer cone with large-roll rubber surrounds ensure efficient, clean bass
  • Vented polepieces provides additional cooling to increase power handling
  • Dual voice coil gives you more wiring options and allows you to drive the sub without bridging
  • One-year warranty

Looking for a more moving audio experience? Take Infinity car audio for a ride. Innovative materials and breakthrough engineering have always put Infinity products out in front of the competition’s. So expect extreme output from these speakers, but be prepared for accuracy and detail that may surprise you. Infinity Reference Series loudspeakers continue to be the top-selling premium speakers in the world. For instance, the 6-1/2-inch Reference coaxial model has been the number-one-selling car audio multielement speaker for five years straight. With proprietary features such as patent-pending Plus One cones, true 4-ohm topology, UniPivot edge-driven tweeters and the industry-leading Intermount III and I-Mount mounting systems, as well as the Starfish tweeter-mounting adapter, Reference Series speakers leave the competition scrambling to keep up.Infinity’s 1062W 10-inch Dual Voice Coil Subwoofer sports a pair of 40 oz. magnets, delivers distortion-free low-end, and extracts maximum power from mono subwoofer amplifiers.

The Infinity Reference Series

Infinity’s Reference Series has been engineered to deliver best-in-class performance for those looking to replace or upgrade their factory speakers. Features like Infinity’s Plus One (patent pending) woofer cones and edge-driven-dome tweeters have helped position Infinity Reference as the number-one line of automotive loudspeakers for the past six years straight.



Distortion-free low-end and efficiency aplenty.

Infinity 1062W Features

Large-roll rubber surrounds
This material provides optimum cone-edge suspension and absorbs distortions that may travel up the cone edge, ensuring clean, tight bass.

Vented pole pieces
Provides additional cooling of the motor structure is provided. The subwoofer’s thermal capabilities are augmented, thus increasing power handling.

High-efficiency polypropylene woofer cones
This lightweight and popular material is used to ensure maximum woofer efficiency. The benefit is high output with modest amplifier power.

Progressive Spider
Progressive spider construction better controls speaker excursion. Translation? Better sound with less distortion.

Mounting Versatility
The subwoofer’s mounting depth allows for use in most sub enclosures–ported, sealed and bandpass.

Dual Voice Coil
A dual voice coil gives you more wiring options and allows you to drive the sub without bridging.


Infinity 1062W Specifications

Power Handling, RMS: 275 Watts
Power Handling, Peak: 1100 Watts
Sensitivity: 94dB
Frequency Response: 25Hz – 400Hz
Impedance: 2 or 8 Ohms
Mounting Depth: 5-7/8 inches (149 mm)
Cutout Diameter: 9-1/4 inches (234 mm)



About Infinity

Infinity was founded in 1968 on a unique blend of technology, performance, and design. Today, Infinity offers three tiers of automotive speakers comparable to the best home-audio components. Infinity Kappa Perfect, Kappa, and Reference Series speakers deliver performance that rivals the best the competition has to offer.


What’s in the Box

Infinity 1062W 10-Inch 1100-Watt Subwoofer, Installation Hardware, User Manual


Infinity Subwoofer Options

Perhaps the most important upgrade you can make to your car audio sound system is the addition of meaningful bass. Subwoofers come in a variety of sizes and configurations. Whether you’re adding bass to a factory system, or building a trophy-winning competition system, Infinity has a subwoofer for your application. Each Infinity subwoofer can be interfaced with a variety of enclosures, from premade to custom boxes made for your specific vehicle.

860w 8-Inch 1000-Watt Subwoofer Infinity 1060w 10-Inch 1100-Watt Subwoofer Infinity 1062w 10-Inch 1100-Watt Dual Voice Coil Subwoofer Infinity 1260w 12-Inch 1200-Watt Subwoofer Infinity 1262w 12-Inch 1200-Watt Dual Voice Coil Subwoofer Infinity Reference 1220de Dual 12-Inch Preloaded Enclosure with Slipstream Port Infinity Reference 1220se Single 12-Inch Preloaded Enclosure with Slipstream Port



No products found.

by

No products found.

by

Alpine SWR1243D / SWR-1243D / SWR-1243D Type-R 12 DVC Car Subwoofer

Alpine SWR1243D / SWR-1243D / SWR-1243D Type-R 12 DVC Car Subwoofer

  • Maximum Power Output: 1800W
  • RMS Power Handling: 600W
  • Frequency Response: 23-500 Hz
  • Impedance: Dual 4-ohm voice coils

Alpine SWR1243D / SWR-1243D / SWR-1243D Type-R 12 DVC Car Subwoofer



No products found.

by

No products found.

by

Clarion Mcd360 3 Way 6 Channel Electronic Crossover with Subwoofer Control

Clarion Mcd360 3 Way 6 Channel Electronic Crossover with Subwoofer Control

  • 2/4/6 Channel Input
  • Front and rear high-pass outputs
  • Adjustable low-pass gain
  • Remote Subwoofer Level Control (Included)
  • Gold Plated Terminals

Brand New Clarion MCD360 3 Way 6 Channel Electronic Crossover w/ Subwoofer Control
Features:

2/4/6 Channel Input
6-Channel / 5 Volt RCA Outputs (Front/Rear/Subwoofer)
Front and rear high-pass outputs
Non-fade low-pass output
Adjustable low-pass gain
Subwoofer Bass Boost
Subwoofer Equalizer and Boost Level Controls
High-Pass Crossover Frequency Multiplier
Remote Subwoofer Level Control (Included)
Gold Plated Terminals
Ground loop isolation input circuit
Gold-plated RCA input/output connectors
Remote turn-on circuit
Power-on LED



More Car Audio Crossover Products

No products found.

by

No products found.

by

Boss BX35 3-Way Electronic Crossover/ Subwoofer Input & Output

Boss BX35 3-Way Electronic Crossover/ Subwoofer Input & Output

  • INPUTS: FRONT, REAR AND SUBWOOFER; OUTPUTS: FRONT, REAR AND SUBWOOFER
  • INDEPENDENT GAIN CONTROLS FOR EACH CHANNEL; DUAL INPUT SELECTOR; BASS BOOST ON/OFF SWITCH WITH FREQUENCY SELECTOR: 40HZ, 80HZ OR 120HZ
  • FREQUENCY MULTIPLIER (X1 OR X5) ON HIGHPASS OUTPUT; SELECTABLE CROSSOVER FREQUENCIES: SUBWOOFER: 40HZ-400HZ; REAR HIGH PASS : 50HZ-1.5KHZ; FRONT HIGH PASS : 50HZ-7.5KHZ
  • SLOPE RATE: 12 DB/OCTAVE; SIGNAL-TO-NOISE RATIO: >90DB; GOLD PLATED CONNECTORS
  • SUBWOOFER PHASE & STEREO/MONO SWITCHES; DIMENSIONS (W X L X H): 8 3/4¿ X 5 3/4¿ X 1 1/2¿

3-Way Electronic Crossover/ Subwoofer Input & Output



BOSS AUDIO BX25 2-WAY ELECTRONIC CROSSOVER

  • Free Shipping

BOSS AUDIO BX25 2-WAY ELECTRONIC CROSSOVER
VARIABLE CROSSOVER FREQUENCIES: LOW PASS: 35 HZ400 HZ & HIGH PASS: 50 HZ1.5 KHZ; VARIABLE BASS BOOST: 0 18 DB @ 45 HZ; SLOPE RATE: 12 DB/OCTAVE; SIGNAL-TO-NOISE RATIO: >90 DB; REMOTE SUBWOOFER LEVEL CONTROL; PHASE INVERSION SWITCH FOR SUB OUTPUT; GOLD-PLATED CONNECTORS; LED POWER INDICATOR; DIM: 6.63L X 5.75″W X 1.5″H”



Related Car Audio Crossover Products

No products found.

by

No products found.

by

Lanzar VIBEX2 Vibe 2 Way Electronic Crossover Network with Remote Subwoofer Control

Lanzar VIBEX2 Vibe 2 Way Electronic Crossover Network with Remote Subwoofer Control

  • Hi-Pass Crossover Adjustable Frequency From 80 To 2.5K Hz
  • Lo-pass Crossover Adjustable Frequency From 35 To 400 Hz
  • Variable Bass Boost Level From 0 To 12 dB
  • Subwoofer Phase Shift 0/180 Degrees
  • Hi-Pass Gain Control

Hi-Pass Crossover Adjustable Frequency From 80 To 2.5K Hz Lo-pass Crossover Adjustable Frequency From 35 To 400 Hz Variable Bass Boost Level From 0 To 12 dB Subwoofer Phase Shift 0/180 Degrees Hi-Pass Gain Control Lo-Pass Gain Control Lo-Pass Stereo/Mono Selector LED Power On Indicator Remote Power On/Off Remote Subwoofer Level Control Dimensions: 6.29-InchW x 1.45-InchH x 5.11-InchD



More Car Audio Crossover Products

No products found.

by

No products found.

by

Boss BX25 2-Way Electronic Crossover with Remote Subwoofer Level Control

Boss BX25 2-Way Electronic Crossover with Remote Subwoofer Level Control

  • VARIABLE CROSSOVER FREQUENCIES: SUBWOOFER: 35HZ-400HZ; HIGH PASS : 50HZ-1.5KHZ
  • VARIABLE BASS BOOST, 0 – +18DB @ 45HZ; SLOPE RATE: 12 DB/OCTAVE; SIGNAL-TO-NOISE RATIO: >90DB
  • REMOTE SUBWOOFER LEVEL CONTROL; PHASE INVERSION SWITCH FOR SUB OUTPUT
  • GOLD PLATED CONNECTORS; LED POWER INDICATOR
  • DIMENSIONS (W X L X H) : 5 3/4¿ X 6 5/8¿ X 1 1/2¿

2-Way Electronic Crossover, Remote Subwoofer Level Control



Related Car Audio Crossover Products

No products found.

by

No products found.

by

SWR-T12 – Alpine Type-R 12″ Shallow Mount Subwoofer

SWR-T12 – Alpine Type-R 12″ Shallow Mount Subwoofer

  • 12″ Single 4 ohm Type-R Shallow Mount Subwoofer
  • Peak Power Handling: 1800 Watts
  • RMS Power Handling: 600 Watts
  • Aluminum woofer cone, Santoprene rubber surround
  • Cast aluminum frame, Radial finned heat sink

# 12″ Single 4 ohm Type-R Shallow Mount Subwoofer
# Power Handling: 1800 Watts
# RMS Power Handling: 600 Watts
# Aluminum woofer cone
# Santoprene rubber surround
# Cast aluminum frame
# Radial finned heat sink
# Special spider design uses a series of adjacent rolls to get the cone moving without requiring a lot of space
# Advanced motor structure reduces the sub’s profile while maintaining accuracy
# Dynamic neodymium magnet structure
# Frequency Response: 25-500 Hz
# Sensitivity: 85.5 dB
# Top Mount Depth: 3-1/2″



More Mcintosh Car Speaker Products

No products found.

by

No products found.

by

Car Audio Tags: